Travis Perkins Group Plc. Approvals


#2104345

Range of bib taps incorporating either brass or DZR brass bodies. The inlet and the outlet of the tap incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1750 Taps
Section Subtitle:
Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
WRAS Approval Number:
2104345
Expiry date:
30/04/2026
Size:
Please see model
Marking:
TPK, SIZE & DATE OF MANUFACTURE MM/YY ON BODY
Installation Requirements:
R001 R040
Model:
799299: ½” BSP (M). .
Factor:
Travis Perkins Group Plc.
Company Name
Travis Perkins Group Plc.
Address
Lodge Way House Lodge Way Harlestone Northapmton
Postcode
NN5 7AL

View All Listings by this Company

Print This Approval


#1912077

Wall mounted hose union taps (various body materials) incorporating a non-rising spindle headwork with a butterfly handle operating member. The spout outlets incorporate a hose union connector. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.
WRAS Approval Number:
1912077
Expiry date:
31/12/2024
Size:
½” BSP (M)
Marking:
TPK, SIZE, DATE OF MANUFACTURER MM/YY & EN1213 ON BODY
Installation Requirements:
R001 R040
Model:
960981 (natural brass).
Factor:
Travis Perkins Group Plc.
Company Name
Travis Perkins Group Plc.
Address
Lodge Way House Lodge Way Harlestone Northapmton
Postcode
NN5 7AL

View All Listings by this Company

Print This Approval


#2205361

Range of spherical isolation valves incorporating brass bodies (nickel plated), brass ball (chrome plated), brass stem and EPDM ‘O’-rings (screwdriver operated or T-type handle). For use with copper pipe (EN1057). Maximum working pressure 16.0 bar (model 999698) Maximum working pressure 25.0 bar (model496877) Maximum working pressure 40.0 bar (models 570500 & 570622) Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2205361
Expiry date:
31/05/2027
Size:
see model
Marking:
TPK, flow arrow & size on body. EN1057 and size on compression nut.
Installation Requirements:
R001
Model:
15mm compression models: 999698 (Tee shaped) 570500 (Full bore) 496877 (Angled) 22mm compression models: 570622 (Full bore)
Factor:
Travis Perkins Group Plc.
Company Name
Travis Perkins Group Plc.
Address
Lodge Way House Lodge Way Harlestone Northapmton
Postcode
NN5 7AL

View All Listings by this Company

Print This Approval


#2402802

Range of filling loop assemblies consisting of an in-line isolation valve, an in-line double check valve assembly (suitable for back flow protection against fluid category 3) that incorporates an isolation valve and a stainless-steel braided EPDM lined hose. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1015 Filling Loop
WRAS Approval Number:
2402802
Expiry date:
28/02/2029
Size:
15mm compression or 15mm pushfit.
Marking:
Altecnic logo, flow arrow and CR on valve. Altecnic, WRAS and date of manufacture (YYYY) on hose.
Installation Requirements:
R001
Model:
Essentials Filing Loop - 873144
Factor:
Travis Perkins Group Plc.
Company Name
Travis Perkins Group Plc.
Address
Lodge Way House Lodge Way Harlestone Northapmton
Postcode
NN5 7AL

View All Listings by this Company
Manufacturer:
Altecnic Limited
Company Name
Altecnic Limited
Address
MUSTANG DRIVE STAFFORD
Postcode
ST16 1GW

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.