Pumps

Section Code 1610 : Wholesome water use.

Back To Directory Sections

#2205095

Range of vertical multistage booster pumps, with stainless steel bodies and impellors. Maximum working pressure: See models Maximum working temperature 85°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2205095
Expiry date:
31/05/2027
Size:
See Models
Marking:
Stuart Turner, CE, Max Temperature and other Technical info on Data Plates
Installation Requirements:
R001 R415
Model:
VM(.) 1 >> Size from 2 to 39 stages VM(.) 3 >> Size from 2 to 33 stages VM(.) 5 >> Size from 2 to 27 stages VM(.) 10 >> Size from 2 to 23 stages VM(.) 15 >> Size from 1 to 17 stages VM(.) 20 >> Size from 1 to 16 stages VM(.) 32 >> Size from 1 to 14 stages VM(.) 45 >> Size from 1 to 13 stages VM(.) 64 >> Size from 1 to 8 stages VM(.) 90 >> Size from 1 to 6 stages ( ) = VM >> AISI304 Components (L) = VM >> AISI316L Components (K*) = VM>> AISI304 + PRESSURE SENSOR (LK*) = VM >> AISI316L + PRESSURE SENSOR *K1 = DANFOSS MBS1900 *K2 = DANFOSS DST P 140 *K3 =SCHNEIDER XMLP0xxBD21F VM(.) 1-3 >> Available with Oval flange G1, Round Flange DN25, Loose round flange DN25, Victaulic DN32 and Clamp Ø59 VM(.) 5 >> Available with Oval flange G1¼, Round Flange DN32, Loose round flange DN32, Victaulic DN32 and Clamp Ø59. VM(.) 10 >> Available with Oval flange G1½, Round Flange DN40, Loose round flange DN40, Victaulic DN50 and Clamp Ø87. VM(.) 15-20 >> Available with Oval flange G2, Round Flange DN50, Loose round flange DN50, Victaulic DN50 and Clamp Ø87. VM(.) 32 >> Available with Loose round flange DN65. VM(.) 45 >> Available with Loose round flange DN80. VM(.) 64-90 >> Available with Loose round flange DN100. Model Bar VM( )1 2 16 VM( )1 3 16 VM( )1 4 16 VM( )1 5 16 VM( )1 6 16 VM( )1 7 16 VM( )1 8 16 VM( )1 9 16 VM( )1 10 16 VM( )1 11 16 VM( )1 12 16 VM()1 13 16 VM(L)1 14 16 VM( )1 16 16 VM( )1 18 16 VM( )1 20 16 VM( )1 22 16 VM( )1 24 16 VM( )1 26 16 VM( )1 27 25 VM( )1 29 25 VM( )1 32 25 VM( )1 34 25 VM( )1( 37 25 VM( )1 39 25 VM( )3 2 16 VM( )3 3 16 VM( )3 4 16 VM( )3 5 16 VM( )3 6 16 VM( )3 7 16 VM( )3 8 16 VM( )3 9 16 VM( )3 10 16 VM( )3 11 16 VM( )3 12 16 VM( )3 13 16 VM( )3 14 16 VM( )3 15 16 VM( )3 16 16 VM( )3 17 16 VM( )3 19 16 VM( )3 21 16 VM( )3 23 25 VM( )3 25 25 VM( )3 27 25 VM( )3 29 25 VM( )3 31 25 VM( )3 33 25 VM( )5 2 16 VM( )5 3 16 VM( )5 4 16 VM( )5 5 16 VM( )5 6 16 VM( )5 7 16 VM( )5 8 16 VM( )5 9 16 VM( )5 10 16 VM( )5 11 16 VM( )5 12 16 VM( )5 13 16 VM( )5 14 16 VM( )5 15 16 VM( )5 17 16 VM( )5 19 25 VM( )5 20 25 VM( )5 23 25 VM( )5 25 25 VM( )5 27 25 VM( )10 2 16 VM( )10 3 16 VM( )10 4 16 VM( )10 5 16 VM( )10 6 16 VM( )10 7 16 VM( )10 8 16 VM( )10 9 16 VM( )10 10 16 VM( )10 11 16 VM( )10 12 16 VM( )10 14 16 VM( )10 15 16 VM( )10 16 25 VM( )10 18 25 VM( )10 19 25 VM( )10 21 25 VM(L)10 22 25 VM( )10 23 25 VM( )15 1 16 VM( )15 2 16 VM( )15 3 16 VM( )15 4 16 VM( )15 5 16 VM( )15 6 16 VM( )15 7 16 VM( )15 8 16 VM( )15 9 16 VM( )15 10 16 VM( )15 11 16 VM( )15 12 25 VM( )15 13 25 VM( )15 15 25 VM( )15 17 25 VM()20 1 16 VM( L)20 2 16 VM( )20 3 16 VM( )20 4 16 VM( )20 5 16 VM( )20 6 16 VM( )20 7 16 VM( )20 8 16 VM( )20 9 16 VM( )20 10 25 VM( )20 11 25 VM( )20 12 25 VM( )20 13 25 VM( )20 14 25 VM( )20 15 25 VM( )20 16 25 VM( )32 1-1 16EVMS( )32 1-0 16 VM( )32 2-2 16 VM( )32 2-0 16 VM( )32 3-2 16 VM( )32 3-0 16 VM( )32 4-2 16 VM( )32 4-0 16 VM( )32 5-2 16 VM( )32 5-0 16 VM( )32 6-2 16 VM( )32 6-0 16 VM( )32 7-2 16 VM( )32 7-0 16 VM( )32 8-2 25 VM( )32 8-0 25 VM( )32 9-2 25 VM( )32 9-1 25 VM( )32 10-2 25 VM( )32 10-0 25 VM( )32 11-2 25 VM( )32 11-1 25 VM(L)32 12-2 30 VM(L)32 12-0 30 VM( )32 13-2 30 VM( )32 13-0 30 VM( )32 14-2 30 VM( )32 14-0 30 VM( )45 1-1 16 VM( )45 1-0 16 VM( )45 2-2 16 VM( )45 2-0 16 VM( )45 3-2 16 VM( )45 3-0 16 VM( )45 4-2 16 VM( )45 4-0 16 VM( )45 5-2 16 VM( )45 5-0 16 VM( )45 6-2 25 VM( )45 6-0 25 VM( )45 7-2 25 VM( )45 7-0 25 VM( )45 8-2 25 VM( )45 8-0 25 VM( )45 9-2 25 VM( )45 9-0 25 VM( )45 10-2 35 VM( )45 10-0 35 VM( )45 11-2 35 VM( )45 11-0 35 VM( )45 12-2 35 VM( )45 12-0 35 VM( )45 13-2 35 VM( )64 1-1 16 VM( )64 1-0 16 VM( )64 2-2 16 VM( )64 2-1 16 VM( )64 2-0 16 VM( )64 3-2 16 VM( )64 3-1 16 VM( )64 3-0 16 VM( )64 4-2 16 VM( )64 4-1 16 VM( )64 4-0 16 VM( )64 5-2 16 VM( )64 5-1 16 VM( )64 5-0 16 VM( )64 6-2 25 VM( )64 6-1 25 VM( )64 6-0 25 VM( )64 7-2 25 VM( )64 7-1 25 VM( )64 7-0 25 VM( )64 8-2 25 VM( )64 8-1 25 VM( )90 1-1 16 VM( )90 1-0 16 VM( )90 2-2 16 VM(L)90 2-0 16 VM(L)90 3-2 16 VM(L)90 3-0 16 VM(L)90 4-2 16 VM( )90 4-0 16 VM( )90 5-2 25 VM( )90 5-0 25 VM( )90 6-2 25 VM( )90 6-0 25
Factor:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley on Thames Oxon
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
pumps@stuart-turner.co.uk

View All Listings by this Company

Print This Approval

#2212703

Range of single and twin shower booster pumps with plastic bodies and impellers. The pump body inlet incorporates a combined EPDM washer and stainless steel strainer. Maximum working pressure: PL45 & PL45S models - 1.5 bar, PL65 & PL65S models - 2.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2212703
Expiry date:
31/12/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with a 15mm standpipe connection on inlets and outlets.
Marking:
Salamander Pumps, model number and other technical data on adhesive label on body.
Installation Requirements:
R001 R415
Model:
PL45 1.5 bar twin, PL65 2.0 bar twin, PL45S 1.5 bar single, PL65S 2.0 bar single.
Factor:
Salamander Pumps Ltd
Company Name
Salamander Pumps Ltd
Postcode
SR5 3XE
Phone
0191 516 2002

View All Listings by this Company

Print This Approval

#2210311

Horizontal end suction centrifugal pump with a 316 stainless steel casing, impeller and shaft. Maximum working pressure 16 bar. Maximum operating temperature 100°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2210311
Expiry date:
31/10/2027
Size:
DN100
Marking:
Grandmas Pump + AEICO logo, model number and other techcnical information.
Installation Requirements:
R001 R415
Model:
GA Series
Factor:
Al-Ghammas Factory for Advanced Electromechanical Industrial Co. (AEICO)
Company Name
Al-Ghammas Factory for Advanced Electromechanical Industrial Co. (AEICO)
Address
Qassim- 1st Industrial City
Country
Saudi Arabia
Phone
+966163220087

View All Listings by this Company

Print This Approval

#2212706

Range of twin shower booster pumps with plastic bodies and impellers. The pump body inlet incorporates a combined EPDM washer and stainless steel strainer. Maximum working pressure: D01695 model 1.5 bar D01696 model 2.0 bar. Maximum operating temperature 65°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2212706
Expiry date:
31/12/2027
Size:
Stainless steel braided EPDM lined flexible hose assemblies with a 15mm standpipe connection on inlets and outlets.
Marking:
Center & Center Wolseley and technical info on adhesive label on body.
Installation Requirements:
R001 R415
Model:
D01695 CENTER SHOWER PUMP 1.5 BAR TWIN D01696 CENTER SHOWER PUMP 2.0 BAR TWIN
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval

#2210907

‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2210907
Expiry date:
31/10/2027
Note:
R008 does not apply to the stainless steel body models.
Size:
Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.
Marking:
Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.
Installation Requirements:
R001 R008
Model:
ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2211024

Range of water pressure booster pumps, comprising of a multi-stage pump with a brass body, and an expansion vessel. The product is supplied with a strainer and two stainless steel braided EPDM lined flexible hose assemblies. The outlet assembly incorporates a non-return valve, not suitable for backflow protection. Maximum working pressure models 46601 and 46602 6.0 bar, models 46622 and 46624 9.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2211024
Expiry date:
30/11/2027
Size:
1” BSP (F) (to strainer).
Marking:
STUART TURNER, CE, model number, maximum temperature, maximum pressure and other technical Info on adhesive label on pump.
Installation Requirements:
R001 R415
Model:
46601: Stuart CH 4-30 PS, 46602: Stuart CH 4-40 PS, 44622: Stuart CH 4-50 PS, 44624: Stuart CH 4-60 PS.
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley on Thames Oxon
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655

View All Listings by this Company

Print This Approval

#2211047

Range of centrifugal multi-stage horizontal pressure booster pumps with brass bodies. The 46593, 46594, 46595 and 46610 models include a non-return valve (not suitable for backflow protection) and an expansion vessel. They are also supplied inline strainer and two stainless steel braided EPDM lined flexible hose assemblies with 1” captive nut x 1" BSP (M) end connection for the inlet and outlet. Maximum working pressure models 46578, 46596, 46605 and 46606: 6.0 bar, Models 46593, 46594, 46595 and 46610: 9.0 bar. Maximum operating temperature 65°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2211047
Expiry date:
30/11/2027
Size:
46578, 46596, 46605 and 46606 models: 1” BSP (F). 46593, 46594, 46595 and 46610 models: 1” BSP (F) (to strainer).
Marking:
Stuart Turner and Stuart Turner logo on adhesive label on body
Installation Requirements:
R001 R415
Model:
46578: Stuart CH 4-30 FL, 46596: Stuart CH 4-40 FL, 46605: Stuart CH 4-50 FL, 46606: Stuart CH 4-60 FL. 46593: Stuart CH 4-30 B (with hoses), 46594: Stuart CH 4-40 B (with hoses), 46595: Stuart CH 4-50 B (with hoses), 46610: Stuart CH 4-60 B (with hoses).
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley on Thames Oxon
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655

View All Listings by this Company

Print This Approval

#2211038

Range of inline circulation pumps with a plastic body, plastic cover, plastic impellers, and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2211038
Expiry date:
30/11/2027
Size:
¾” BSP (M) & 1” BSP (M).
Marking:
TACO and model on top of pump, Flow arrow on bottom of body. TACO Italia SrL, pressure, and technical information on adhesive label on body
Installation Requirements:
R001
Model:
A6PHG01
Manufacturer:
Taco Italia S.r.l.
Company Name
Taco Italia S.r.l.
Address
Via Galileo Galilei, 89-91 36066 Sandrigo (VI) Italy

View All Listings by this Company

Print This Approval

#2212032

TapBoost’ booster pump with a brass body, plastic impellers, and silicone ‘O’-rings. Compression connection for use with copper pipe (manufactured to BS EN 1057). The inlet incorporates a stainless steel strainer and the outlet incorporates a non-return valve, not suitable for backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2212032
Expiry date:
31/12/2027
Size:
15mm compression inlet x ½” BSP (M) outlet.
Marking:
Salamander Pumps, CE, maximum temperature, and other product information on adhesive label on body. Flow arrow on body.
Installation Requirements:
R001
Model:
TBS15
Manufacturer:
Salamander Pumps Ltd
Company Name
Salamander Pumps Ltd
Postcode
SR5 3XE
Phone
0191 516 2002

View All Listings by this Company

Print This Approval

#2212082

Range of mains booster pumps with brass bodies, plastic impellors, and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2212082
Expiry date:
31/12/2027
Size:
¾” BSP (M) inlet/outlet
Marking:
Salamander Pumps, Salamander logo, model series (HomeBoost or CombiBoost), and flow arrow on body. Technical information on adhesive label on body.
Installation Requirements:
R001
Model:
HB (HomeBoost), CB (CombiBoost), HBQ (HomeBoostQ), IHB (IHomeBoost), ICB (ICombiBoost).
Manufacturer:
Salamander Pumps Ltd
Company Name
Salamander Pumps Ltd
Postcode
SR5 3XE
Phone
0191 516 2002

View All Listings by this Company

Print This Approval

#2210908

TP series 200 range of single stage pumps with electrocoated cast iron or bronze bodies, stainless steel impellers and EPDM ‘O’-rings. (TPE models are only available with electrocoated cast iron bodies). The products can incorporate the following shaft seal variations: BQQE (silicon carbide-silicon carbide) & BQBE (Silicon carbide-carbon). The TPE pumps are available with or without a sensor. Maximum working pressure 16.0 bar (TP and TPE40-XXX/2 and TP and TPE40 XXX/2 models). All other models 10.0 bar. Maximum operating temperature: Bronze models are 85°C, cast iron models are cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2210908
Expiry date:
31/10/2027
Size:
TP(E)(D) 32: DN32 Flange (inlet/outlet), TP(E)(D) 40: DN40 Flange (inlet/outlet), TP(E)(D) 50: DN50 Flange (inlet/outlet), TP(E)(D) 65: DN65 Flange (inlet/outlet), TP(E)(D) 80: DN80 Flange (inlet/outlet) & TP(E)(D) 100: DN100 Flange (inlet/outlet).
Marking:
Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, Product/Version number, technical info and manufacturing country on data plate on body.
Installation Requirements:
R001 R415
Model:
TP series 200 pumps: TP (E)(D) 32/40/50/65/80/100. Example Code: TP E D 40 -270 /2 S -A -F -A -BQQE -H C B Where: TP = Pump range. E = Electronically speed-controlled pump. D = Twin-head pump (optional). 40 = Nominal diameter of inlet and outlet ports (DN), 2 or 3 digits, value range 32/40/50/65/80/100. -270 = Maximum head [dm], 2 to 4 digits, value range from 30 to 390. /2 = Pole number (TP/TPE 40 models), one digit, value range 2/4. S = Code for sensor version: [Blank]: with MGE motor and without sensor, S: with factory-fitted differential-pressure sensor. A = Code for pump version. Can either be A, X, A+E, X+E. A: Basic Version, X: Special version, (+E): With certificate or test reports, the second character of the code for pump version is an "E". F = Code for pipe connection: DIN flange. A = Code for materials. Can either be A or Z. A: Basic version. Z: Bronze pump housing and motor stool. BQQE = Code for shaft seal including other plastic and rubber pump parts, except the neck ring. Can be BQQE (silicon carbide-silicon carbide) or BQBE (Silicon carbide-carbon). -H = Code for rated motor power [kW] - will be a letter or a number, please consult installation and operating instructions. C = Code for phase and voltage or other information [V] - will be a letter, please consult installation and operating instructions. B = Code for speed variant [rpm] - will be a letter or number, please consult installation and operating instructions.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company
Manufacturer:
GRUNDFOS Manufacturing Ltd.
Company Name
GRUNDFOS Manufacturing Ltd.
Address
Ipari Park Búzavirág u. 14. Tatabánya, 2800
Country
Hungary

View All Listings by this Company

Print This Approval

#2210906

CR(I)(N)(E) ranges of multistage centrifugal pumps incorporating stainless steel impellers, intermediate chamber and outer sleeve. CR(E) versions have cast iron bases and pump heads coated with black cathodic paint. CRI(E) and CRN(E) versions have stainless steel bases and pumpheads. The pumps are available with the following shaft seals HQQ*, HUU*, HUB*, HQB*, where * can be E for EPDM and V for FKM. Maximum working pressures: CR1, 3 or 5 (2-36 stages) Oval flange: 16.0 bar. CR1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange: 25.0 bar CRI/N1, 3 or 5 (2-36 stages) Flexi clamp with oval flange connection: 16.0 bar CR/I/N1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange, PJE, Flexi clamp or Triclamp: 25.0 bar CR10 (1-16 stages) Oval flange or DIN/ANSI/JIS flange: 16.0 bar. CR10 (17-22 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI10 (1-16 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI10 (17-22 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar CRN10 (1-22 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR15 or 20 (1-7 stages) Oval flange: 10.0 bar. CR15 or 20 (1-10 stages) DIN/ANSI/JIS flange: 16.0 bar. CR15 or 20 (11-17 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI15 or 20 (1-7 stages) Flexi clamp with oval flange connection: 10.0 bar CRI15 or 20 (1-10 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI15 or 20 (11-17 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CRN15 or 20 (1-17 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR models: Cold water use only. CRI/CRN models: Cold water use only and from April 2023 99°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2210906
Expiry date:
31/10/2027
Size:
Oval flange: Rp 1” - 2”. Flexi Clamp Base: Small Base (CR/I/N1/1(s)/3/5) Ø32, Medium Base (CR/I/N15/20) Ø50. Triclamp Base Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50. Flange Base: Small Base (CR/I/N1/1(s)/3/5) DN25/32, Medium Base (CR/I/N15/20) DN40 and 50. PJE Base: Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50.
Marking:
Grundfos and Grundfos logo, type, Model, Product/Version no., technical info, temperature (WRAS 23C or WRAS 99C), manufacturing country on data plate on motor stool.
Installation Requirements:
R001 R415
Model:
CR(I)(N)(E) 1(s) range with 2-36 stages, CR(I)(N)(E) 3 range with 2-36 stages, CR(I)(N)(E) 5 range with 2-36 stages, CR(I)(N)(E) 10 range with 1-22 stages, CR(I)(N)(E) 15 range with 1-17 stages, CR(I)(N)(E) 20 range with 1-17 stages. Model keycode: CR(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRI(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRN(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE. Where: CR = Pump type and Cast Iron, I = EN 1.4301, N = EN 1.4401, E = Preminum Electronically Controlled Motor, C = Core (Basic) with Electronically Controlled Motor. 1/3/5/10/15/20 = Flow rate [m³/h], (s) = Reduced impeller version. A = No. of stages. B = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange. C = Code for pipe connection: A = Oval flange, CA = Flexi clamp, CX = TriClamp, F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). D = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. E = Code for rubber parts: E = EPDM, V = Viton. XXX = Code for shaft seal: HQQ, HUU, HUB, HQB. [H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide]. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2301900

CR(N)(E) ranges of vertical multistage centrifugal pumps with stainless steel (CRN models) or black polymer coated cast iron bodies (CR models) and a stainless steel impeller. The products are available with or without a sensor. Maximum working pressure: 16.0 bar - CR(N)(E) 32 range with 1-7 stages, CR(N)(E) 45 range with 1-5 stages, CR(N)(E) 64 range with 1-5 stages. 30.0 bar - CR(N)(E) 32 range with 8-14 stages, CR(N)(E) 45 range with 6-11 stages, CR(N)(E) 64 range with 6-8 stages. 33.0 bar - CR(N)(E) 45 range with 12-13 stages. Maximum operating temperature - CR models are cold water use only. CRN models are cold water use only up to February 2nd 2023, and 99°C from February 3rd 2023.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2301900
Expiry date:
31/01/2028
Size:
CR/CRN 32: CR/CRN 32, 1-14 stages: DN65 and DN80 flange connection. CRN32, 1-14 stages: 3” PJE connection CR/CRN 45: CR/CRN 45, 1-13 stages: DN80 and DN100 flange connection. CRN45, 1-13 stages: 4” PJE connection. CR/CRN 64: CR/CRN 64, 1-8 stages: DN100 flange connection. CRN64, 1-8 stages: 4” PJE connection.
Marking:
Grundfos and Grundfos logo, model, type, prod/version no., technical information and manufacturing country on data plate on motor stool.
Installation Requirements:
R001 R415
Model:
CR/CRN(E) 32-A-B C-D-E-F-XXXX, CR/CRN(E) 45-A-B C-D-E-F-XXXX, CR/CRN(E) 64-A-B C-D-E-F-XXXX. Where: Type range: CR = Pump type and Cast Iron, N = EN 1.4401, E = Preminum Electronically Controlled Motor. 32, 45 or 64 = flow rate m³/h, A = number of impellers (CR/CRN 32 1-14, CR/CRN 45 1-13, CR/CRN 64 1-8). B = number of reduced impellers: 0, 1 or 2 on CR/CRN 32 1-7, CR/CRN 45 1-5, CR/CRN 64 1-8 models, 0 or 2 on all other models. C = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, K = Pump with low NPSH, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange, D = Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). E = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. F = Code for rubber parts: E = EPDM, V = Viton. XXXX = Code for shaft seal: HQQE or V / HUUE or V / HUBE or V /HQBE or V. H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide, E = EPDM, V = Viton. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2211908

‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2211908
Expiry date:
30/11/2027
Note:
R008 does not apply to the stainless steel body models. R415 does not apply if used on a closed circuit.
Size:
Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.
Marking:
Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.
Installation Requirements:
R001 R008 R415
Model:
UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70 or 75. E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2301901

‘Homebooster’ pump with stainless steel body, plastic impeller and EPDM rubber ‘O’-rings. The product is supplied with two loose brass ¾” captive nut x ½” BSP (M) connectors and fibre gaskets for installation on the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2301901
Expiry date:
31/01/2028
Size:
¾” BSP (M) inlet x outlet (to pump). ½” BSP (M) inlet x outlet (to optional brass connectors).
Marking:
Grundfos and Grundfos logo, type, Product no. and technical info on adhesive label on motor housing. Flow arrow on body.
Installation Requirements:
R001 R415
Model:
UPA 15-90 N 160 Homebooster.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2301305

Range of water pressure booster sets with a cold water storage cistern and booster pump. All models incorporate a non-return valve, not suitable for backflow protection. These models have an AG air gap suitable for fluid category 3 protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2301305
Expiry date:
31/01/2028
Size:
½” BSP (M).
Marking:
Adhesive label on top of cistern stating - Stuart Turner, Model No, Serial number, Part No, Volume in litres and technical information.
Installation Requirements:
R001 R415 R270 R280
Model:
46711 iBoost V200 with cold water storage cistern and variable speed pump. 46668 iBoost F200 with cold water storage cistern and fixed speed pump.
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley on Thames Oxon
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655

View All Listings by this Company

Print This Approval

#2301357

Range of water pressure booster sets with a cold water storage cistern and booster pump. All models incorporate a non-return valve, not suitable for backflow protection. These models have an AB air gap suitable for fluid category 5 protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2301357
Expiry date:
31/01/2028
Note:
R574 applies. The water in the storage cistern is considered wholesome.
Size:
½” BSP (M).
Marking:
Adhesive label on top of cistern stating - Stuart Turner, Model No, Serial number, Part No, Volume in litres and technical information.
Installation Requirements:
R001 R415 R270 R280 R570
Model:
46713 iBoost V200 CAT5 with cold water storage cistern and variable speed pump. 46677 iBoost F200 CAT5 with cold water storage cistern and fixed speed pump.
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley on Thames Oxon
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655

View All Listings by this Company

Print This Approval

#2110136

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2110136
Expiry date:
31/10/2026
Size:
FGV3 model - F (round flange) versions: DN25. FGV6-FGV20 models - F (round flange) versions: DN32-50. FGV3-FGV20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.
Marking:
Fourgroup, model number, and other technical info on adhesive label on body.
Installation Requirements:
R001 R415
Model:
FGV 3 FGV 6 FGV 10 FGV 15 FGV 20 Code example FGV X/Y A B C D E Where: FGV = Standard Pump model X = Rated flow [m³/h] (varies: 1-20). Y = No. of stages. A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency
Factor:
FOURGROUP
Company Name
FOURGROUP
Address
via E. Fermi 8, 35020 Polverara (PD)
Country
Italy

View All Listings by this Company

Print This Approval

#2104079

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: FGH Three phase models 85°C, FGH Single phase models 55.0°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2104079
Expiry date:
30/04/2026
Size:
1 ¼” BSP (F) – 2” BSP (F)
Marking:
Fourgroup, model number, and other technical info on adhesive label on body.
Installation Requirements:
R001 R415
Model:
Horizontal/Self-Priming Multi-Stage Pumps: FGH3/XX A FGH6/XX A FGH10/XX A FGH15/XX A FGH20/XX A Where: FGH = Standard model. 3//6/10/15/20 = rated power [m³/h]. XX = no. of stages A = motor connection T = 3 phase, blank = Single phase
Factor:
FOURGROUP
Company Name
FOURGROUP
Address
via E. Fermi 8, 35020 Polverara (PD)
Country
Italy

View All Listings by this Company

Print This Approval

#2105325

Range of booster pumps with plastic bodies and impellers, stainless steel shafts, brass manifolds, NBR ‘O’-rings and EPDM seals. The product incorporates a pressure vessel. The outlet(s) incorporate(s) an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The inlet hose(s) supplied with this product incorporate(s) an isolation valve. Maximum working pressure 4.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2105325
Expiry date:
31/05/2026
Note:
IRN R150 applies to both inlets of the Twin models only.
Size:
Stainless-steel braided EPDM lined flexible hoses with 15mm pushfit (inlet and outlets) x ¾” BSP captive nut end connections (to pump).
Marking:
Bristan, model name & other technical information on adhesive label on pump body.
Installation Requirements:
R001 R150 R415
Model:
ST NHPUMP 20TN & 239574
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#2304317

Range of cold water supply booster sets, consisting of between 2 & 4 pumps, modular stainless steel manifold system, servicing valve, non-return valve (not suitable for backflow protection) and an expansion vessel. Maximum working pressure 10.0 bar or 16.0 bar (identified on adhesive label on expansion vessel) Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2304317
Expiry date:
30/04/2028
Size:
DN50 to DN150
Marking:
Dutypoint Ltd. model, serial number and other technical information on adhesive label on base.
Installation Requirements:
R001 R415
Model:
VT2-05-xxxx VT2-10-xxxx VT2-15-xxxx VT2-20-xxxx VT3-05-xxxx VT4-05-xxxx VT3-10-xxxx VT3-15-xxxx VT3-20-xxxx VT4-10-xxxx VT4-15-xxxx VT4-20-xxxx Example of model: VT2-05-015T xxxx on end of model codes above denotes all motor size and type. Range: VT. Number of Pumps: 2. Nominal flow rate: (m³/hr) 05. Motor kW: (without decimal)15 (1.5kw). Voltage: (T=400/3/50 M=230/1/50) T
Manufacturer:
Dutypoint Ltd.
Company Name
Dutypoint Ltd.
Address
Olympus Park, Quedgeley Gloucestershire
Postcode
GL2 4DH

View All Listings by this Company

Print This Approval

#2304909

Range of circulator pumps with brass bodies, plastic impellor, and EPDM ‘O’-rings and seals. The COMFORT 15-14 BX prefix models incorporate a screwdriver operated isolation valve on the inlet and a non-return valve at the outlet. These are housed within 1” BSP (M) x ½” BSP (M) adaptors. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 95°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2304909
Expiry date:
30/04/2028
Size:
COMFORT 15-14 B prefix models: ½” BSP (F). COMFORT 15-14 BX prefix models: 1” BSP (M).
Marking:
Grundfos on body. Model on adhesive label on body. Flow arrow on the isolation valve.
Installation Requirements:
R001
Model:
COMFORT 15-14 B PM, COMFORT 15-14 BA PM, COMFORT 15-14 BDT PM, COMFORT 15-14 BX PM, COMFORT 15-14 BXA PM, COMFORT 15-14 BXDT PM.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2303041

Range of multistage pumps (VL and CL series) and submersible pumps (VN, CN, ES and CS series) with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Maximum working pressure 15.0 bar (VL and CL series pumps only).

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2303041
Expiry date:
31/03/2028
Note:
VN, CN, ES and CS series submersible pumps: The level control assembly (cable and level control) are not covered under the scope of this approval. These pumps are also open outlet use only.
Size:
VL and CL series: 1 ¼” Female BSP inlet x 1 ½” Female BSP outlet. VN and CN series: 1 ¼” Female BSP outlet - 2" Female BSP outlet. ES and CS series: 1 ¼” Female BSP outlet.
Marking:
Franklin electric Srl logo, WRAS, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on body.
Installation Requirements:
R001 R415
Model:
VNx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CN/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, VLx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CL/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, ESx1/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D, x1CS/xx2 Ixxx3 x4x5x6 Nx7 x8Bx9x10x11Nx12 D. Where: VN, CN, VL, CL, ES, CS = Series name. VN/VL/ES series “E-TECH” brand CN/CL/CS Series “FPS” brand x1 = Nominal Flow: 3, 5, or 9. (9 is not available on ES and CS models) xx2 = number of impellers: 2 to 10 (VN/CN & VL/CL models), 2 to 8 (ES/CS models), depending on Nominal Flow and Frequency. I = Material: St/Steel 1.4301 (AISI304). xxx3 = Motor Power (kW x 10): 005, 007, 009, 011… x4 = Supply (no phase): T (three phase), M (single phase). x5 = Frequency (Hz): 5 (50 Hz), or 6 (60 Hz). x6 = Motor Configuration: L (Bi-phase, 90° single-phase), D (Three-phase, triangle), or Y (Three-phase, star). N = Mechanical seal elastomer: N = NBR. x7 = Mechanical Seal surface: 1 (Graphite / Silicon Carbide), or 2 (Silicon Carbide). x8 = Float Switch: 0 (without). B = Cable type: B (Blue). x9 = Cable size: A (4G1), B (4G1.5), C (3G1), or D (3G1.5). x10 = Cable length: O: 20m - VN/CN and ES/CS models, E: 5m - VL/CS models. x11 = Control Panel (not in contact with liquid): 0 (without), or 1 (connected - VN/CN models only). N = Nude terminal (not in contact with liquid). x12 = Option (only on VN/CN models) - Discharge head (”): Empty (1¼” Nickel plated brass), I (1¼” inox), or J (2” inox). D = Drinking water approved.
Factor:
Franklin Electric SRL
Company Name
Franklin Electric SRL
Address
Via Asolo 7 Dueville Vicenza 36031
Country
Italy
Phone
+39 0444 360366
General Email
info.it@fele.com

View All Listings by this Company

Print This Approval

#2305012

Range of single (SSR) and twin (STR) ended shower booster pumps with plastic bodies, stainless steel motor shaft, plastic impellors and NBR ‘O’-rings. Supplied with stainless steel strainers. Maximum working pressure 3.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2305012
Expiry date:
31/05/2028
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating a 22mm pushfit connection.
Marking:
Grundfos logo, model and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Model:
STR2-1.5 C, STR2-2.0 C, SSR2-2.0 C.
Manufacturer:
Grundfos Watermill Ltd.
Company Name
Grundfos Watermill Ltd.
Address
Gemini House, Enterprise Way, Edenbridge
Postcode
TN8 6HF
Country
Kent

View All Listings by this Company

Print This Approval

#2305073

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: EV30, EV45, 30VR & 45VR models - 32.0 bar, EV65, EV95, 65VR & 95VR models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2305073
Expiry date:
31/05/2028
Size:
DN65 - DN100
Marking:
Franklin electric S.r.l logo, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.
Installation Requirements:
R001 R415
Model:
EV and VR ranges. Code example (EV range): EV 30 /13 A B C D E F G H J K L M N. Where: EV = Pump model EV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). EV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); EV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); EV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); EV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz). Code example (VR range): 30 VR0700 A B C X-XXXX. Where: 30 = Rated flow [m³/h] (varies: 30-95). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "G" - (cast iron/304SS); "N" - (AISI316/EN 1.4401). B = Flange type: "F" - round. C = Mechanical Seal: “A” - (BQBE, BE1); “B” - (BQQE, BE2). X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. 30VR: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); 45VR: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); 65VR: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A (60Hz); 95VR: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).
Manufacturer:
Franklin Electric SRL
Company Name
Franklin Electric SRL
Address
Via Asolo 7 Dueville Vicenza 36031
Country
Italy
Phone
+39 0444 360366

View All Listings by this Company

Print This Approval

#2311900

Single stage centrifugal pump, with plastic impellers. The pump is equipped with ceramic bearings; the body and shaft are made of stainless steel. The product is supplied with loose fibre/NBR inlet/outlet gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2311900
Expiry date:
30/11/2028
Size:
2” BSP (M) inlet/outlet
Marking:
Grundfos and Grundfos logo, type, model, production number, technical info and manufacturing country on data plate on top of motor housing. Flow arrow on body.
Installation Requirements:
R001 R415
Model:
UPS 32 -100 N 180
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2305910

Range of circulator pumps with stainless steel bodies and a plastic impeller. All models are available with a plastic (composite) rotor can, the MAGNA1 range is also available with a stainless-steel rotor can in the DN32 flanged, threaded 1½ & 2” sizes only. The MAGMA3 models have a differential pressure sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2305910
Expiry date:
31/05/2028
Size:
Flanged: DN32, DN40, DN50, DN65. Threaded: 1 ½” & 2” BSP (M).
Marking:
Grundfos and Grundfos logo on motor housing. Grundfos Holdings A/S and address, type, model, Product No., Serial No., production date (YYWW), manufacturing country and other technical information on data plate on motor control box.
Installation Requirements:
R001
Model:
MAGNA1 XX1-XX2 N XXX3, MAGNA1 XX1-XX2 F N XXX3, MAGNA3 XX1-XX2 N XXX3, MAGNA3 XX1-XX2 F N XXX3. Where: MAGNA1 = pump type (without sensor), MAGNA3 = pump type (with differential pressure sensor). XX1 = Nominal diameter (DN) of inlet/outlet ports (mm). XX2 = Max. head (dm). Blank or F = Blank - threaded, F - Flanged connection. N = Stainless steel pump housing. XXX3 = Port to port length (mm). Full model list below: MAGNA3 32-120 F N 220, MAGNA3 40-80 F N 220, MAGNA3 40-100 F N 220, MAGNA3 40-120 F N 250, MAGNA3 40-150 F N 250, MAGNA3 40-180 F N 250, MAGNA3 50-40 F N 240, MAGNA3 50-60 F N 240, MAGNA3 50-80 F N 240, MAGNA3 50-100 F N 280, MAGNA3 50-120 F N 280, MAGNA3 50-150 F N 280, MAGNA3 50-180 F N 280, MAGNA3 65-40 F N 340, MAGNA3 65-60 F N 340, MAGNA3 65-80 F N 340, MAGNA3 65-100 F N 340, MAGNA3 65-120 F N 340, MAGNA3 65-150 F N 340, MAGNA1 25-40 N 180, MAGNA1 25-60 N 180, MAGNA1 25-80 N 180, MAGNA1 25-100 N 180, MAGNA1 25-120 N 180, MAGNA1 32-40 N 180, MAGNA1 32-60 N 180, MAGNA1 32-80 N 180, MAGNA1 32-100 N 180, MAGNA1 32-40 F N 220, MAGNA1 32-60 F N 220, MAGNA1 32-80 F N 220, MAGNA1 32-100 F N 220, MAGNA1 32-120 F N 220, MAGNA1 40-40 F N 220, MAGNA1 40-60 F N 220, MAGNA1 40-80 F N 220, MAGNA1 40-100 F N 220, MAGNA1 40-120 F N 250, MAGNA1 40-150 F N 250, MAGNA1 40-180 F N 250, MAGNA1 50-40 F N 240, MAGNA1 50-60 F N 240, MAGNA1 50-80 F N 240, MAGNA1 50-100 F N 280, MAGNA1 50-120 F N 280, MAGNA1 50-150 F N 280, MAGNA1 50-180 F N 280, MAGNA1 65-40 F N 340, MAGNA1 65-60 F N 340, MAGNA1 65-80 F N 340, MAGNA1 65-100 F N 340, MAGNA1 65-120 F N 340, MAGNA1 65-150 F N 340, MAGNA3 25-40 N 180, MAGNA3 25-60 N 180, MAGNA3 25-80 N 180, MAGNA3 25-100 N 180, MAGNA3 25-120 N 180, MAGNA3 32-40 N 180, MAGNA3 32-60 N 180, MAGNA3 32-80 N 180, MAGNA3 32-100 N 180, MAGNA3 32-40 F N 220, MAGNA3 32-60 F N 220, MAGNA3 32-80 F N 220, MAGNA3 32-100 F N 220, MAGNA3 40-40 F N 220, MAGNA3 40-60 F N 220, MAGNA1 32-120 N 180, MAGNA3 32-120 N 180.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2306320

Permanent magnet variable frequency multistage pump with plastic bodies, plastic impellers, stainless steel shaft and EPDM ‘O’-rings. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2306320
Expiry date:
30/06/2028
Size:
1” BSP (F).
Marking:
Shinhoo (trademark of Anhui Xinhu Canned Motor Pump Co., Ltd), maximum pressure and other technical info on data plate on top of body
Installation Requirements:
R001 R415
Model:
PFM 03-30 EC - Permanent magnet variable frequency multistage pump.
Manufacturer:
ANHUI XINHU CANNED MOTOR PUMP CO., LTD.
Company Name
ANHUI XINHU CANNED MOTOR PUMP CO., LTD.
Address
Northeast corner of the intersection of West Huguang Road and Jiangjunling Road, High-tech Development Zone, Hefei City, Anhui, P.R.China

View All Listings by this Company

Print This Approval

#2306903

CMBE range of horizontal multistage centrifugal booster pumps with stainless steel bodies and impellers and EPDM ‘O’-rings. All models include an expansion vessel, non-return valve, pressure gauge and sensor on the outlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2306903
Expiry date:
30/06/2028
Size:
CMBE1 & CMBE3: 1” BSPT (F) Inlet/Outlet. CMBE5: 1 ¼” BSPT (F) Inlet/1” BSPT (F) Outlet. CMBE10: 1 ½” BSPT (F) Inlet/Outlet.
Marking:
Grundfos and Grundfos logo, type, Model, P/N no. and technical info on adhesive label on end of motor housing.
Installation Requirements:
R001 R040
Model:
CMBE-XX1-XX2-I-U-C-X3-D-X4 Where: CMBE = Booster type - booster with integrated frequency inverter. XX1 = Rated flow rate [m³/h] @ 50Hz - 1, 3, 5 or 10. XX2 = Maximum head [m] - 44, 54, 62 or 93 (CMBE 1 = 44, CMBE 3 = 62 or 93, CMBE 5 = 62, CMBE 10 = 54). I = Materials in contact with liquid - Sleeve, Pump shaft, Impellers/chamber, 5-way valve: EN1.4301/AISI 304, Pressure manager: PP 30GF, Pressure tank: EPDM/steel/PP/Butyl. U = Supply Voltage [V] - 1 x 200-240 V, 50/60 Hz. C = Motor - High-efficiency motor with frequency converter (IP55). X3 = Main cable and plug options - A/B/C/D/E/H/G/J/O. D = Controller - Integrated frequency converter. X4 = Thread - A: Rp 1, B: Rp 1 1/4 or C: Rp 1 1/2.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2305076

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: NKV32 & NKV45 models - 32.0 bar, NKV65 & NKV95 models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2305076
Expiry date:
31/05/2028
Size:
DN65 - DN100
Marking:
DAB Pumps Spa, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.
Installation Requirements:
R001 R415
Model:
Code example (EV range): NVK 30 /13 A B C D E F G H J K L M N. Where: NVK = Pump model 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). NKV 32: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); NKV 45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); NKV 65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); NKV 95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).
Factor:
DAB Pumps Spa
Company Name
DAB Pumps Spa
Address
Via Marco Polo 35035 Mestrino (PD) Italy
Phone
Tel: +39 0499 048811 Fax: +39 0499 000179

View All Listings by this Company

Print This Approval

#2305078

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: FGV30, FGV45 - 32.0 bar, FGV65, FGV95 - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2305078
Expiry date:
31/05/2028
Size:
DN65 - DN100
Marking:
Fourgroup, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body. Flow arrow on body.
Installation Requirements:
R001 R415
Model:
FGV range. Code example (FGV range): FGV 30 /13 A B C D E F G H J K L M N. Where: FGV = Pump model FGV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). FGV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); FGV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); FGV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); FGV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).
Factor:
FOURGROUP
Company Name
FOURGROUP
Address
via E. Fermi 8, 35020 Polverara (PD)
Country
Italy

View All Listings by this Company

Print This Approval

#2204361

Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor, pressure vessel and a non-return valve integral to the pump chamber. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2204361
Expiry date:
30/04/2027
Size:
1” BSP (F)
Marking:
SPCO and model number other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Model:
SMART PLUS 370-25-A, (370W), 25m (Rated Head), SMART PLUS 550-24-A, (550W), 24m (Rated Head), SMART PLUS 750-30-A, (750W), 30m (Rated Head), SMART PLUS 550-22-Z-A, (550W), 22m (Rated Head), SMART PLUS 750-28-Z-A, (750W), 28m (Rated Head), SMART PLUS 850-30-A, (850W), 65m (Rated Head).
Factor:
Swiss Pump Company AG
Company Name
Swiss Pump Company AG
Address
Moosweg 36,3645 Thun - Gwatt
Country
Switzerland

View All Listings by this Company

Print This Approval

#2305084

Range of vertical multistage pumps with cast iron bodies with a black electrodeposition coating, stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: MVX 30 & MVX 45- 32.0 bar, MVX 65 & MVX95 VR - 25.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2305084
Expiry date:
31/05/2028
Size:
DN65 - DN100
Marking:
Sea-Land SRL, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.
Installation Requirements:
R001 R415
Model:
Code example - MVX range: MVX 30 /13 A B C D E F G H J K L M N. Where: MVX = Pump model 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). MVX30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); MVX45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); MVX65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); MVX95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).
Factor:
Sea-Land Srl
Company Name
Sea-Land Srl
Address
Via E Mattei 25 35038 Torreglia Italy

View All Listings by this Company

Print This Approval

#2204362

Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor, pressure vessel and a non-return valve integral to the pump chamber. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2204362
Expiry date:
30/04/2027
Size:
1” BSP (F)
Marking:
HW (Company logo) and model number other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Model:
HMPP V JVS 10 (370W), 25m (Rated Head), HMPP V JVS 15 (550W), 24m (Rated Head) & HMPP V JVS 65 (750W), 30m (Rated Head) Water Booster Pumps.
Factor:
HWS PUMPS & VALVES CANADA INC.
Company Name
HWS PUMPS & VALVES CANADA INC.
Address
398-2416 MAIN ST VANCOUVER BC V5T 3E2 CANADA

View All Listings by this Company

Print This Approval

#2309343

Range of circulating pumps with a bronze body, plastic impeller and EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2309343
Expiry date:
30/09/2028
Size:
1” BSP (M) or 1½” BSP (M).
Marking:
Rating plate on body including: Wilo, class, PN, model no. and date of production (YYWW).
Installation Requirements:
R001
Model:
Z Range: Z15/6-* **130**, Z15/7-* **130**, Z20/2-* **130**, Z20/2-* **140**, Z20/5-* **140**, Z20/6-* **140**, Z20/7-* **140**, Z25/6-* **180**, Z25/7-* **180**. Where: 15/20/25 = connection size: 15 or 20 = 1” BSP (M), 25 = 1½” BSP (M). 2/5/6/7 = motor power (head in mWC). * = speed number: 1,2 or 3. 1st ** = electrical connection: PL, PR, CLR, CLF, CRR, CRF, FSL, FSR. 130/140/180 = Pump body dimension (height in mm). 2nd ** = terminal box position: 12,3,6 or 9 o’clock. Example code: Z25/6-3 PL 180 12.
Factor:
Wilo Intec
Company Name
Wilo Intec
Address
50 Avenue Eugene Casella, 18700 Aubigny Sur Nere, France
Phone
+332 48 81 62 62

View All Listings by this Company

Print This Approval

#2309919

‘SCALA1’ range of booster pumps with plastic bodies, plastic impellers, EPDM and NBR ‘O’-rings. The product incorporates a non-return valve. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2309919
Expiry date:
30/09/2028
Note:
Cold water use only.
Size:
1” BSP (M) inlet/outlet.
Marking:
Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, model no., and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Model:
SCALA1 3-25. SCALA1 3-35. SCALA1 3-45. SCALA1 5-25. SCALA1 5-35. SCALA1 5-55. Where 3 or 5 = flow rate in m³/h, 25-55 = max. head (m).
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2310307

Range of pumps, single and 4-stage, with stainless steel bodies and plastic impellers. The pumps are housed within a plastic casing. The outlets of the WGZ15-20EA, WGZ15-45EA and WGZ15-45EAB models incorporate a non-return valve. The WGZ15-35EA.and WGZ15-35EAB models have a twin pump arrangement which incorporates a non-return valve within the connecting pipe between the pumps. Maximum working pressure 10.0 Bar. Maximum operating temperature 95°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2310307
Expiry date:
31/10/2028
Size:
1” BSP (F).
Marking:
Zhejiang Wigo Intelligence Pump Co., Ltd.GREENPRO (registered trademark of Zhejiang Wigo Intelligence Pump Co., Ltd.), Model No. and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Model:
Frequency conversion booster pumps with 4 stages: WGZ15-45EA, WGZ15-45EAB. Frequency conversion booster pumps with single stage: WGZ15-20EA, WGZ15-35EA, WGZ15-35EAB.
Manufacturer:
Zhejiang Wigo Intelligence Pump Co., Ltd.
Company Name
Zhejiang Wigo Intelligence Pump Co., Ltd.
Address
No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#2310317

Range of circulation pumps with a stainless steel body, plastic impeller and a silicone ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2310317
Expiry date:
31/10/2028
Size:
½” BSP (F).
Marking:
GREENPRO (registered trademark of Zhejiang Wigo Intelligence Pump Co., Ltd.), type, pressure, WRAS and other technical information on adhesive label on pump face. Flow arrow on body
Installation Requirements:
R001
Model:
RS12/1.2EM. RS12/1.2EMB.
Manufacturer:
Zhejiang Wigo Intelligence Pump Co., Ltd.
Company Name
Zhejiang Wigo Intelligence Pump Co., Ltd.
Address
No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang
Country
China

View All Listings by this Company

Print This Approval

#2310916

Range of multistage centrifugal pumps, with stainless steel bodies (CRN models) or black coloured cataphoretic electrodeposition coated cast iron bodies (CR models), stainless steel sleeve and impellers. The products can be supplied with or without a sensor. Maximum working pressures (no. of stages in brackets): CR/CRN 95 (1-5): 16.0 bar. CR/CRN 95 (6-8): 25.0 bar. CRN 95 (9-12): 40.0 bar. CR/CRN 125 (1-4): 16.0 bar. CR 125 (5): 25.0 bar. CRN 125 (6-7): 25.0 bar. CRN 125 (8-12): 40.0 bar. CR 155 (1-4): 16.0 bar. CRN 155 (1-4): 16.0 bar. CRN 155 (5-6): 25.0 bar. CRN 155 (7-11): 40.0 bar. CR/CRN 185 (1-3): 16.0 bar. CR/CRN 185 (4-5): 25.0 bar. CR/CRN 185 (6-8): 40.0 bar. CR/CRN 215 (1-3): 16.0 bar. CR/CRN 215 (4-5): 25.0 bar. CR/CRN 215 (6-7): 40.0 bar. CR/CRN 255 (1-3): 16.0 bar. CR/CRN 255 (3-4): 25.0 bar. CR/CRN 255 (5-6): 40.0 bar. When a sensor is incorporated the maximum working pressure is as follows: 25.0 bar with either the IPS44 or VTU sensor, (unless they are used on a pump with a maximum working pressure of 16.0 bar, in this instance the lesser pressure applies). The MBS3000 sensor can be used on all models, the pump maximum working pressure applies. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2310916
Expiry date:
31/10/2028
Size:
CR/CRN(E) 95 models: DN100 inlets/outlets, CR/CRN(E) 125 & CR/CRN(E) 155 models: DN150 inlets/outlets, CR/CRN(E) 185, CR/CRN(E) 215 & CR/CRN(E) 255 models: DN200 inlets/outlets. CRN(E) 95 models: PJE 4” inlets/outlets, CRN(E) 125 & CRN(E) 155 models: PJE 6” inlets/outlets, CRN(E) 185, CRN(E) 215 & CRN(E) 255 models: PJE 8” inlets/outlets.
Marking:
Grundfos logo, type, model, Prod/Ver no., technical info and manufacturing/assembly country on data plate on motor stool.
Installation Requirements:
R001 R415
Model:
Model key code: CR/CRN (E) AA-B-C-D-E-F-G-XXXX Where: CR = Pump type and Cast Iron. CRN = Pump type and EN 1.4401. E = Preminum Electronically Controlled Motor (CR /CRN 95 -125 models only). AA: Flow rate [m³/h] - 95 / 125 / 155 / 185 / 215 / 255. B: Number of impellers – dependent on model (1-12). C: Number of reduced diameter impellers - 0 / 1 / 2 / 3 / 4. D: Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, T = Trust handling device, V = Cascade function, X = Special version*, Z = Pump with bearing flange. E: Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (CRN models only). F: Code for materials: A = Basic version, C = Carbon-free pump, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, P = PEEK neck ring, Q = Silicon carbide/silicon carbide bearing in pump and silicon carbide/silicon carbide seal faces in thrust handling device, R = Silicone carbide /silicone carbide bearing, T = Baseplate EN 1.4408, U = Silicon carbide/silicon carbide bearing in pump and silicon carbide/tungsten carbide seal faces in thrust handling device, W = Tungsten carbide/tungsten carbide, X = Special*. G: Code for rubber parts: E = EPDM, V = FKM. XXXX: Code for shaft seal: HQQx, HUUx, HUBx, HQBx. Where: H = Balanced cartridge seal with O-ring B = Carbon, synthetic resin-impregnated U = Cemented tungsten carbide Q = Silicon carbide x can = E or V for rubber parts: E = EPDM, V = FKM. *Special version ONLY covers the situation where more than 4 options are selected within the same position.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2311312

Range of two stage horizontal water pumps with plastic bodies, stainless steel impellers and shaft, incorporating EPDM gaskets and seals. The products also incorporate a non-return valve (not suitable for backflow protection) and an shock arrestor expansion vessel. Maximum working pressure 1.8 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2311312
Expiry date:
30/11/2028
Size:
1” BSP (F).
Marking:
Wilo and Wilo address, model number + date of manufacture (/ YYwWW), e.g., 3082244 / 23w16 and technical information on adhesive label on body.
Installation Requirements:
R001 R415
Model:
3082244 - PE-410MA (60Hz), 302076 - PE-350EA (50Hz), 3075656 - Medana PE3-350EA (50Hz).
Manufacturer:
WILO Pumps Ltd.
Company Name
WILO Pumps Ltd.
Address

View All Listings by this Company

Print This Approval

#2311316

Horizontal 5 stage pump with stainless steel body, stainless steel impellers, EPDM and silicone ‘O’-rings. Maximum working pressure 6.2 Bar. BS6920 40°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2311316
Expiry date:
30/11/2028
Size:
1¼” BSP (F).
Marking:
Swiss Pump Company AG logo (‘SPCO®’), model and technical information on adhesive label on pump body.
Installation Requirements:
R001 R415
Model:
Z(HMIA).
Factor:
Swiss Pump Company AG
Company Name
Swiss Pump Company AG
Address
Moosweg 36,3645 Thun - Gwatt
Country
Switzerland

View All Listings by this Company

Print This Approval

#2311069

Range of vertical multistage pumps with either stainless-steel bodies or cast-iron bodies with a black epoxy powder coating, stainless-steel impellers, shaft and outer sleeve, EPDM ‘O’-rings and a silicon carbide + EPDM shaft seal. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2311069
Expiry date:
30/11/2028
Size:
DN25 -100.
Marking:
Capari logo on metal cover plate on side of body. Flow arrow on body. Type, model, pressure and other information on data plate on body.
Installation Requirements:
R001 R415
Model:
CVX AAB/CC-D/E Series: CVX. AA: Pump model size representing flow rate (m³/h) - 03, 05, 10, 15, 20, 32, 45, 64, 90. B: Pump generational code - 1. CC: No. of stages (model dependent - see below). D: Frequency - V = 50Hz or W = 50/60Hz. /G = cast iron base (CVX451/641/901 models only). Stainless steel bodies: CVX031: 5 -36 stages. 691472 - CVX031/5-V (DN25), 691473 - CVX031/7-V (DN25), 691474 - CVX031/10-V (DN25), 691475 - CVX031/15-V (DN25), 691476 - CVX031/19-V (DN25), 691477 - CVX031/23-V (DN25), 691478 - CVX031/29-V (DN25), 691479 - CVX031/33-V (DN25), 691480 - CVX031/36-V (DN25). CVX051: 4-36 stages. 691482 - CVX051/4-V (DN25), 691483 - CVX051/5-V (DN25), 691484 - CVX051/8-V (DN25), 691485 - CVX051/10-V (DN25), 691486 - CVX051/13-V (DN25), 691487 - CVX051/16-V (DN25), 691488 - CVX051/20-V (DN25), 691489 - CVX051/24-V (DN25), 691490 - CVX051/29-V (DN25), 691491 - CVX051/36-V (DN25). CVX101: 3-22 stages. 691493 - CVX101/3-V (DN40), 691494 - CVX101/4-V (DN40), 691495 - CVX101/6-V (DN40), 691496 - CVX101/9-V (DN40), 691497 - CVX101/12-V (DN40), 691498 - CVX101/16-V (DN40), 691499 - CVX101/22-V (DN40). CVX151: 2-17 stages. 691501 - CVX151/2-V (DN50), 691502 - CVX151/3-V (DN50), 691503 - CVX151/5-V (DN50), 691504 - CVX151/7-V (DN50), 691505 - CVX151/9-V (DN50), 691506 - CVX151/12-W (DN50), 691507 - CVX151/14-V (DN50), 691508 - CVX151/17-V (DN50). CVX201: 2-17 stages. 691510 - CVX201/2-V (DN50), 691511 - CVX201/3-V (DN50), 691512 - CVX201/5-V (DN50), 691513 - CVX201/7-V (DN50), 691514 - CVX201/10-W (DN50), 691515 - CVX201/14-V (DN50), 691516 - CVX201/17-V (DN50). CVX321: 2-14 stages. 691518 - CVX321/2-V (DN65), 691519 - CVX321/3-V (DN65), 691520 - CVX321/4-V (DN65), 691521 - CVX321/6-W (DN65), 691522 - CVX321/8-V (DN65), 691523 - CVX321/10-V (DN65), 691524 - CVX321/12-V (DN65), 691525 - CVX321/14-V (DN65). Cast iron bodies: CVX451: 2-13 stages. 691533 - CVX451/2-V/G (DN80), 691534 - CVX451/3-V/G (DN80), 691535 - CVX451/4-V/G (DN80), 691536 - CVX451/5-2-V/G (DN80), 691537 - CVX451/6-2-V/G (DN80), 691872 - CVX451/6-V/G (DN80), 691538 - CVX451/9-2-V/G (DN80), 691873 - CVX451/10-V/G (DN80), 691874 - CVX451/13-2-V/G (DN80). CVX641: 2-8 stages. 691539 - CVX641/2-V/G (DN100), 691540 - CVX641/3-1-V/G (DN100), 691541 - CVX641/4-V/G (DN100), 691875 - CVX641/4-2-V/G (DN100), 691542 - CVX641/6-2-V/G (DN100), 691543 - CVX641/7-1-V/G (DN100), 691876 - CVX641/8-1-V/G (DN100). CVX901: 2-6 stages. 691544 - CVX901/2-V/G (DN100), 691545 - CVX901/3-V/G (DN100), 691877 - CVX901/3-2-V/G (DN100), 691546 - CVX901/4-V/G (DN100), 691547 - CVX901/5-V/G (DN100), 691878 - CVX901/6-V/G (DN100).
Factor:
Caprari S.p.A
Company Name
Caprari S.p.A
Address
Via Emilia, Ovest 900, 41123 Modena
Country
Italy

View All Listings by this Company

Print This Approval

#2312802

Range of cold water supply booster sets, incorporating stainless steel manifold system connecting 2 or 3 wholesome water pumps. The set also includes spherical valves, non-return valves (not intended or suitable for backflow protection) and expansion vessels. Maximum working pressure 10.0 bar. Cold water supply only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2312802
Expiry date:
31/12/2028
Size:
DN80 inlet x DN80 outlet flanged connections. DN50 inlet x DN65 outlet flanged connections.
Marking:
Dutypoint, model, serial number and technical information on adhesive label on base plate.
Installation Requirements:
R001 R415
Model:
DN50 Discharge Versions: Twin pump units: FR/VR2-03, FR/VR2-05, FR/VR2-10. Triple pump units: FR/VR3-03, FR/VR3-05, FR/VR3-10. DN80 Discharge Versions: Twin pump units: FR/VR2-15, FR/VR2-22. Triple pump units: FR/VR3-15, FR/VR3-22. The model is suffixed with two numbers to denote motor size and ‘LHT’.
Manufacturer:
Dutypoint Ltd.
Company Name
Dutypoint Ltd.
Address
Olympus Park, Quedgeley Gloucestershire
Postcode
GL2 4DH

View All Listings by this Company

Print This Approval

#2312902

‘SCALA1 TWIN’ range of booster pump sets, comprising of two pumps with plastic bodies, plastic impellers, EPDM and NBR ‘O’-rings and an accessory set consisting of a base plate, plastic manifold and four brass spherical valves. Each pump incorporates a non-return valve. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2312902
Expiry date:
31/12/2028
Note:
R415 only apllies to the complete booster pump sets.
Size:
1¼” BSP (F) manifold inlet/outlet.
Marking:
Pumps: Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, model no., and other technical information on adhesive label on body. SCALA1 Twin accessory set: Grundfos logo, Grundfos, SCALA1 and SCALA2 on base plate. .
Installation Requirements:
R001 R415
Model:
SCALA1 TWIN 3-25, SCALA1 TWIN 3-35, SCALA1 TWIN 3-45, SCALA1 TWIN 5-25, SCALA1 TWIN 5-35, SCALA1 TWIN 5-55. Where 3 or 5 = flow rate in m³/h and 25-55 = max. head (m) on the individual pumps. The models are supplied with either of the following accessory sets: SCALA1 Twin accessory set (99725165), SCALA2 Twin accessory set (99743076).
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#240207701

‘SCALA 2’ integrated, self-priming, plastic bodied (compact) mains pressure boosting pump. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240207701
Expiry date:
28/02/2029
Size:
1” BSPT (M) inlet and outlet.
Marking:
Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, Model, P/N no., Serial no., P/C no., technical info, manufacturing country and data matrix on adhesive label on end of motor housing.
Installation Requirements:
R001 R415
Model:
Scala2 Model2 3-45 AKCCDE, Scala2 Model2 3-45 AKCDDE, Scala2 Model2 3-45 AKCGDE.
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#240507701

`UPM3` range of single stage circulator pumps, with stainless steel or plastic bodies, plastic impellers, ceramic shafts and bearings, EPDM 'O'-rings and seals. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240507701
Expiry date:
31/05/2029
Size:
Stainless steel body models (N): 1½” BSP (M) & 2” BSP (M). Composite (plastic) body models (CIL3): 1” BSP (M).
Marking:
Grundfos logo, Grundfos and model on top of pump housing. Production number, serial number, and technical information on side of pump housing. Stainless steel models also have a flow arrow on the body.
Installation Requirements:
R001
Model:
UPM3 **1-**2 N ***3 (GFNxx-). UPM3 **1-**2 - CIL3 ***3 (GFNxx-). Where: UPM3 = pump type and can also be: UPM3 HYBRID, UMP3 DHW, UPM3 K, UPM3 AUTO L UPM3 FLEX AS. **1 = size of inlet/outlet connection: N models – 25 = 1 ½”, 32 = 2”. CIL3 models – 15 = 1”. **2 = maximum head (dm): 20, 40, 50, 60, 70, 75 (all models). 105, 145 (stainless steel body models only). N = stainless steel body. CIL3 = composite (plastic) body. ***3 = port to port length in mm: 130 (all models) or 180 (2” models only).
Factor:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7, DK-8850 Bjerringbro
Country
Denmark
Phone
+45 24610542

View All Listings by this Company

Print This Approval

#2104082

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: MH Three phase models 85°C, MH Single phase models 55.0°C and EH sp models 35°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2104082
Expiry date:
30/04/2026
Size:
EH models: 1 ¼” BSP (F) – 2” BSP (F) EHsp models: 1” BSP (F)
Marking:
Data label showing Franklin electric S.r.l, model number, PMAX and other technical info on body. WRAS label on body. Max temperature on adhesive label on body.
Installation Requirements:
R001 R415
Model:
Horizontal Multi-Stage Pumps : 3 MH A XX Z-MM EN 5 MH A XX Z-MM EN 9 MH A XX Z-MM EN 15 MH A XX Z-MM EN 20 MH A XX Z-MM EN Where: A= Pump material: “EMPTY” for AISI 304 and “N” for AISI 316; XX= n. of stages ( 50 Hz single phase): - from 2 to 9 for EH 3 & 5; - from 2 to 6 for EH 9; - from 2 to 3 for EH 15; - 2 for EH 20; n. of stages ( 50 Hz three phase): - from 2 to 9 for EH 3 & 5; - from 2 to 8 for EH 9; - from 2 to 7 for EH 15; - from 2 to 5 for EH 20; n. of stages ( 60 Hz single phase): - from 2 to 7 for EH 3; - from 2 to 5 for EH 5; - from 2 to 3 for EH 9; - No EH 15&20 60Hz single phase; n. of stages ( 60 Hz three phase): - from 2 to 7 for EH 3 & 5; - from 2 to 5 for EH 9; - from 2 to 4 for EH 15; - from 2 to 3 for EH 20; Z=Connection Type: “B” for “Rp” and “P” for “NPT”; MM=motor connection and frequency as follows: 5M=single phase and 50Hz 5T=three phase and 50Hz 6M=single phase and 60Hz 6T=three phase and 60Hz EN= Type of mechanical seal: “E0 – E1 – E2” for EH 3/5/9 ; “E1 – E2” for EH 15/20
Factor:
Franklin Electric SRL
Company Name
Franklin Electric SRL
Address
Via Asolo 7 Dueville Vicenza 36031
Country
Italy
Phone
+39 0444 360366
General Email
info.it@fele.com

View All Listings by this Company

Print This Approval

#240402714

‘Right Pump’ range of single and twin pumps with plastic bodies. The universal models incorporate a non-return valve on the outlet(s) of the pump body (x2 for the RP50TU model) and an expansion vessel. The twin models incorporate a bypass tube between each side of the pump. The inlet(s) of the pump body incorporate(s) a combined EPDM washer and stainless-steel strainer. The inlet and outlet hoses incorporate an isolation valve on the pushfit connection. The push fit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 1.5 to 3.6 bar (see model). Maximum operating temperatures 60°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240402714
Expiry date:
30/04/2029
Size:
RP50PT model: Stainless steel braided EPDM lined flexible hose assemblies with 15mm pushfit end connections. All other models: Stainless steel braided EPDM lined flexible hose assemblies with 22mm pushfit end connections.
Marking:
Salamander logo, model name and product information on label.
Installation Requirements:
R001 R150 R415
Model:
RP50PT - 1.5 Bar Twin Pump (Positive), RP75PT - 2.2 Bar Twin Pump (Positive), RP100PT - 3.0 Bar Twin Pump (Positive), RP50TU - 1.5 Bar Twin Pump (Universal), RP75TU - 2.2 Bar Twin Pump (Universal), RP100TU - 3.0 Bar Twin Pump (Universal), RP55SU - 1.5 Bar Single Pump (Universal), RP80SU - 2.4 Bar Single Pump (Universal), RP120SU - 3.6 Bar Single Pump (Universal). Where: RP = (Right Pump). 50/55 = 1.5 Bar, 75 = 2.2 Bar, 80 = 2.4 Bar, 100 = 3.0 Bar, 120 = 3.6 Bar. P = Positive (No expansion vessel). U = Universal (With expansion vessel). T = Twin. S = Single.
Manufacturer:
Salamander Pumps Ltd
Company Name
Salamander Pumps Ltd
Postcode
SR5 3XE
Phone
0191 516 2002

View All Listings by this Company

Print This Approval

#240404710

Range of 3 or 4 stage permanent magnet variable frequency pumps, with stainless steel bodies, plastic impellers (3 stage model) or stainless steel impellers (4 stage models). Product incorporates an internal shock arrestor. Maximum working pressure 6.5 Bar. Maximum operating temperature 75°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240404710
Expiry date:
30/04/2029
Size:
GT prefix, T42 & T50 models: 1” BSP (F). T8-50 & T8-60 models: 2” BSP (F).
Marking:
Geocon, model no., temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Model:
3 stage models: GT40 (0.37kW), GT46 (0.55kW), GT55 (0.68kW), GT60 (0.88kW), T42 (0.68kW), T50 (0.85kW). 4 stage models: T8-50 (1.5kW), T8-60 (2.2kW).
Factor:
Geocon Global Co., Ltd.
Company Name
Geocon Global Co., Ltd.
Address
2F., No. 25-1, Minle St., East Dist., Chiayi City 600
Country
Taiwan

View All Listings by this Company

Print This Approval

#240408701

Range of vertical submersible multistage pumps with either threaded or flanged end connections. Maximum operating temperature 23°C. Open outlet use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240408701
Expiry date:
30/04/2029
Size:
See models.
Marking:
Manufacturers logo and model on data plate.
Installation Requirements:
R001 R415
Model:
E6P – 3” BSP (F) E6RX – 2.1/2” BSP or 3” BSP (F) E6SX – 3” or 4” BSP (F) E6NVX - 2.1/2” BSPT, 3” BSPT or 4” BSPT (F) E8P – 5” BSP (F) E8R – 3” BSP (F) E8PX – 5” BSP (F) E8NVX – 5” BSPT (F) E10S – 150mm Ø flanged connection E10R – 4” BSP (F) E10PX – 6” BSPT (F) E12S - 150mm Ø flanged connection E12PX – 221mm Ø flanged connection E14S – 200 / 230mm Ø flanged connection E16S.P – 247mm Ø flanged connection E18S – 230mm Ø flanged connection E20S.P. – 260mm Ø flanged connection E22S.P. – 330mm Ø flanged connection
Manufacturer:
Caprari S.p.A
Company Name
Caprari S.p.A
Address
Via Emilia, Ovest 900, 41123 Modena
Country
Italy

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 3 of 4

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.