‘VSH SudoPress’ range of copper or gunmetal press-fit fittings with EPDM ‘O’ rings for use with copper pipe. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1905333

Expiry date:

31/05/2024

Size:

15mm – 54mm

Marking:

SudoPress on body.

Installation Requirements:

R001

Model:

‘VSH SudoPress’ range

Factor:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

01302 560560

View All Listings by this Company

>B< Sonic range of Brass & Copper push fit fittings incorporating EPDM rubber ‘O’-rings for use with copper pipe. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1905363

Expiry date:

31/05/2024

Size:

See model.

Marking:

>B< and size on fitting body.

Installation Requirements:

R001

Model:

90° elbow (S090): 12 - 22mm. Equal tee (S130): 12x12x12mm - 22x22x22mm. Reducer branch tee (S130): 22x22x15mm. Straight coupler (S270): 12 - 22mm. Models added May 2019: Coupler 10mm - 28mm. Elbow 10mm - 28mm. Street Elbow 15mm. Equal Tee 10mm - 28mm. Tee - Reduced branch 22x22x15, 14x14x12, 16x16x12, 16x16x14 & 18x18x14. Tee - Reduced End & Branch 22x15x15. Tee - Reduced End 22x15x22. Tee - Reduced branch 28x28x22. Reduced Coupler 12x10mm, 14x12mm, 16x12mm & 16x14mm. Fitting Reducer 18x15mm, 22x18mm, 15x12mm, 15x10mm, 22x15mm & 28x22mm. Telescopic Connector - single leg 15mm, 18mm, 22mm & 28mm. Straight Connector – Male 15x1/2", 22x3/4", 28x1.1/4" & 28x1". Straight Connector – Female 15x1/2", 28x1.1/4", 22x3/4" & 28x1". Bent Tap Connector 15x1/2". Straight Tap Connector 15x1/2" Straight Tap Connector 22x3/4" Tee - With Female Branch 15x1/2"x15. Stop End 10mm, 15mm, 18mm & 22mm. Wall Plate Elbow 15x1/2". Models added November 2019: Straight Connector - Female 18x1/2 Straight Connector - Male 18x1/2 Street Elbow - 18mm, 22mm Male Elbow - 15x1/2 Female Elbow - 15x1/2 Reduced Coupler - 18x15, 22x15

Factor:

Conex Universal Ltd

Company Name

Conex Universal Ltd

Address

Global House 95 Vantage Point The Pensnett Estate Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 121 5772831

General Email

salesuk@ibpgroup.com

View All Listings by this Company

“B Profile SS” range of 316L & 304 stainless steel press fittings with EPDM ‘O’-rings for use with stainless steel pipe manufactured to EN 10312. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1905364

Expiry date:

31/05/2024

Size:

See model

Marking:

IDC & Banninger on body

Installation Requirements:

R001

Model:

BEND: 2SBA011 PS13 15X1/2 2SBA021 PS13 18X1/2 2SBA022 PS13 18X3/4 2SBA032 PS13 22X3/4 2SBA043 PS13 28X1 2SBA054 PS13 35X1.1/4 2SBA065 PS13 42X1.1/2 2SBA077 PS13 54X2 2SBB011 PS14 15X1/2 2SBB021 PS14 18X1/2 2SBB022 PS14 18X3/4 2SBB032 PS14 22X3/4 2SBB043 PS14 28X1 2SBB054 PS14 35X1.1/4 2SBB065 PS14 42X1.1/2 2SBB077 PS14 54X2 2SBN011 PS12 15MM 2SBN022 PS12 18MM 2SBN033 PS12 22MM 2SBN044 PS12 28MM 2SBN055 PS12 35MM 2SBN066 PS12 42MM 2SBN077 PS12 54MM ELBOW: 2SBC011 PS14 15X1/2 2SBC021 PS14 18X1/2 2SBC031 PS14 22X1/2 2SBC032 PS14 22X3/4 2SBC043 PS14 28X1 2SBC054 PS14 35X1.1/4 2SBD011 90 SS 15x1/2MI CRIMP 2SBD021 90 SS 18x1/2MI CRIMP TEE: 2SBE111 PS30 15X15X1/2 2SBE212 PS30 18X18X1/2 2SBE222 PS30 18X18X3/4 2SBE313 PS30 22X22X1/2 2SBE323 PS30 22X22X3/4 2SBE414 PS30 28X28X1/2 2SBE424 PS30 28X28X3/4 2SBE434 PS30 28X28X1 2SBE515 PS30 35X35X1/2 2SBE525 PS30 35X35X3/4 2SBE545 PS30 35X35X1.1/4 2SBE616 PS30 42X42X1/2 2SBE626 PS30 42X42X3/4 2SBE656 PS30 42X42X1.1/2 2SBE717 PS30 54X54X1/2 2SBE727 PS30 54X54X3/4 2SBE777 PS30 54X54X2 STRAIGHT CONNECTOR: 2SBF011 PS3 15X1/2 2SBF021 PS3 18X1/2 2SBF022 PS3 18X3/4 2SBF031 PS3 22X1/2 2SBF032 PS3 22X3/4 2SBF033 PS3 22X1 2SBF042 PS3 28x3/4 2SBF043 PS3 28X1 2SBF054 PS3 35X1.1/4 2SBF065 PS3 42X1.1/2 2SBF077 PS3 54X2 2SBG011 PS2 15X1/2 2SBG021 PS2 18X1/2 2SBG022 PS2 18X3/4 2SBG031 PS2 22X1/2 2SBG032 PS2 22X3/4 2SBG033 PS2 22X1 2SBG042 PS2 28X3/4 2SBG043 PS2 28X1 2SBG054 PS2 35X1.1/4 2SBG065 PS2 42X1.1/2 2SBG077 PS2 54X2 2SBI011 PS69F 15X1/2 2SBI012 PS69F 15X3/4 2SBI021 PS69F 18X1/2 2SBI022 PS69F 18X3/4 2SBI032 PS69F 22X3/4F 2SBI033 PS69F 22X1 2SBI043 PS69F 28X1 2SBI054 PS69F 35X1.1/4 2SBI065 PS69F 42X1.1/2 2SBI077 PS69F 54X2 2SBJ011 PS69 15X1/2 2SBJ021 PS69 18X1/2 2SBJ032 PS69 22X3/4 2SBJ043 PS69 28X1 2SBJ054 PS69 35X1.1/4 2SBJ065 PS69 42X1.1/2 2SBJ077 PS69 54X2 SLIP COUPLER 2SBH011 PS1S 15MM 2SBH022 PS1S 18MM 2SBH033 PS1S 22MM 2SBH044 PS1S 28MM 2SBH055 PS1S 35MM 2SBH066 PS1S 42MM 2SBH077 PS1S 54MM FLAT FACE UNION: 2SBK012 PS43 15x3/4 2SBK022 PS43 18x3/4 2SBK032 PS43 22x3/4 2SBK033 PS43 22x1 2SBK043 PS43 28x1 2SBK044 PS43 28x1.1/4 2SBK055 PS43 35x1.1/2 WALL PLATE ELBOW 2SBL011 PS44 15x1/2 2SBL021 PS44 18x1/2 2SBL032 PS44 22x3/4 2SBL043 PS44 28x1 STREET BEND: 2SBM011 P12S 15MM 2SBM022 P12S 18MM 2SBM033 P12S 22MM 2SBM044 P12S 28MM 2SBM055 P12S 35MM 2SBM066 P12S 42MM 2SBM077 P12S 54MM 90DEG STREET BEND: 2SC7011 PS50 15MM 2SC7022 PS50 18MM 2SC7033 PS50 22MM 2SC7044 PS50 28MM 2SC7055 PS50 35MM 2SC7066 PS50 42MM 2SC7077 PS50 54MM 45DEG ST BEND: 2SBO011 PS21S 15MM 2SBO022 PS21S 18MM 2SBO033 PS21S 22MM 2SBO044 PS21S 28MM 2SBO055 PS21S 35MM 2SBO066 PS21S 42MM 2SBO077 PS21S 54MM OBTUSE BEND: 2SBP011 PS21 15MM 2SBP022 PS21 18MM 2SBP033 PS21 22MM 2SBP044 PS21 28MM 2SBP055 PS21 35MM 2SBP066 PS21 42MM 2SBP077 PS21 54MM CROSS SHORT: 2SC8011 PS51 15MM 2SC8022 PS51 18MM 2SC8033 PS51 22MM 2SC8044 PS51 28MM 2SC9011 PS52 15MM 2SC9022 PS52 18MM 2SC9033 PS52 22MM 2SC9044 PS52 28MM EQUAL TEE: 2SBQ111 PS24 15MM 2SBQ222 PS24 18MM 2SBQ333 PS24 22MM 2SBQ444 PS24 28MM 2SBQ555 PS24 35MM 2SBQ666 PS24 42MM 2SBQ777 PS24 54MM RB TEE 2SBQ212 PS25 18X18X15 2SBQ313 PS25 22X22X15 2SBQ323 PS25 22X22X18 2SBQ414 PS25 28X28X15 2SBQ424 PS25 28X28X18 2SBQ434 PS25 28X28X22 2SBQ515 PS25 35X35X15 2SBQ525 PS25 35X35X18 2SBQ535 PS25 35X35X22 2SBQ545 PS25 35X35X28 2SBQ636 PS25 42X42X22 2SBQ646 PS25 42X42X28 2SBQ656 PS25 42X42X35 2SBQ737 PS25 54X54X22 2SBQ747 PS25 54X54X28 2SBQ757 PS25 54X54X35 2SBQ767 PS25 54X54X42 FITTED REDUCER: 2SBR021 PS6 18X15 2SBR031 PS6 22X15 2SBR032 PS6 22X18 2SBR041 PS6 28X15 2SBR042 PS6 28X18 2SBR043 PS6 28X22 2SBR052 PS6 35X18 2SBR053 PS6 35X22 2SBR054 PS6 35X28 2SBR064 PS6 42X28 2SBR065 PS6 42X35 2SBR074 PS6 54X28 2SBR075 PS6 54X35 2SBR076 PS6 54X42 COUPLER: 2SBS011 PS1 15MM 2SBS022 PS1 18MM 2SBS033 PS1 22MM 2SBS044 PS1 28MM 2SBS055 PS1 35MM 2SBS066 PS1 42MM 2SBS077 PS1 54MM STOP END: 2SBT011 PS61 15MM 2SBT022 PS61 18MM 2SBT033 PS61 22MM 2SBT044 PS61 28MM 2SBT055 PS61 35MM 2SBT066 PS61 42MM 2SBT077 PS61 54MM Models added May 2022: STRAIGHT CONNECTOR: 2SBF010L - 15mmx3/8"M 2SBF010 - 15mmx3/8"M 2SBF012L - 15mmx3/4"M 2SBF012 - 15mmx3/4"M 2SBF044L - 28mmx11/4"M 2SBF044 - 28mmx11/4"M 2SBF051L - 35mmx1/2"M 2SBF051 - 35mmx1/2"M 2SBF053L - 35mmx1"M 2SBF053 - 35mmx1"M 2SBF055L - 35mmx1.1/2"M 2SBF055 - 35mmx1.1/2"M 2SBF064L - 42mmx11/4"M 2SBF064 - 42mmx11/4"M 2SBF075L - 54mmx1.1/2"M 2SBF075 - 54mmx1.1/2"M 2SBG010L - 15mmx3/8"F 2SBG010 - 15mmx3/8"F 2SBG041L - 28mmx1/2"F 2SBG041 - 28mmx1/2"F 2SBG044L - 28mmx1.1/4"F 2SBG044 - 28mmx1.1/4"F 2SBG053L - 35mmx1"F 2SBG053 - 35mmx1"F 2SBG055L - 35mmx1.1/2"F 2SBG055 - 35mmX1.1/2"F 2SBG064L - 42mmX1.1/4"F 2SBG064 - 42mmX1.1/4"F 2SBG075L - 54mmx1.1/2"F 2SBG075 - 54mmx1.1/2"F 2SBR051L - 35mmx15mm 2SBR051 - 35mmX15mm 2SBR061L - 42mmx15mm 2SBR061 - 42mmx15mm 2SBR063L - 42mmx22mm 2SBR063 - 42mmx22mm 2SBR071L - 54mmx15mm 2SBR071 - 54mmx15mm 2SBR072L - 54mmx22mm 2SBR072 - 54mmx22mm CROSS TWO LEVELS: 2SBV011L - 15mm 2SBV011 - 15mm 2SBV021L - 18mmx15mm 2SBV021 - 18mmx15mm 2SBV031L - 22mmx15mm 2SBV031 - 22mmx15mm 2SBV032L - 22mmx18mm 2SBV032 - 22mmx18mm 2SBV041L - 28mmx15mm 2SBV041 - 28mmx15mm 2SBV042L - 28mmx18mm 2SBV042 - 28mmx18mm REDUCED COUPLER: 2SBS021L - 18x15mm 2SBS021 - 18x15mm 2SBS031L - 22x15mm 2SBS031 - 22x15mm 2SBS032L - 22x18mm 2SBS032 - 22x18mm 2SBS041L - 28x15mm 2SBS041 - 28x15mm 2SBS042L - 28x18mm 2SBS042 - 28x18mm 2SBS043L - 28x22mm 2SBS043 - 28x22mm 2SBS053L - 35x22mm 2SBS053 - 35x22mm 2SBS054L - 35x28mm 2SBS054 - 35x28mm 2SBS063L - 42x22mm 2SBS063 - 42x22mm 2SBS064L - 42x28mm 2SBS064 - 42x28mm 2SBS065L - 42x35mm 2SBS065 - 42x35mm 2SBS074L - 54x28mm 2SBS074 - 54x28mm 2SBS075L - 54x35mm 2SBS075 - 54x35mm 2SBS076L - 54x42mm 2SBS076 - 54x42mm Models ending L = SS316L stainless steel, models without L suffix = SS304 stainless steel. SS316L stainless steel models are for use with SS316L stainless steel pipe manufactured to EN 10312, with dimension of pipe: O.D. x wall thickness 15mmx1mm 18mmx1mm 22mmx1.2mm 28mmx1.2mm 35mmx1.5mm 42mmx1.5mm 54mmx1.5mm SS304 stainless steel models are for use with SS304 stainless steel pipe manufactured to EN 10312, with dimension of pipe: O.D. x wall thickness 15mmx1mm 18mmx1mm 22mmx1.2mm 28mmx1.2mm 35mmx1.5mm 42mmx1.5mm 54mmx1.5mm

Factor:

Ningbo IDC International Trading Co. Ltd.

Company Name

Ningbo IDC International Trading Co. Ltd.

Address

Floor 43, Building A, International Trade Center, Ningbo Chamber of Commerce, No. 558 of Taikangzhong Road, Yinzhou District, Ningbo

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Banninger Piping System Ltd.

Company Name

Zhejiang Banninger Piping System Ltd.

Address

Bingang INUSTRIAL CITY YUHUAN ZHEJIANG

View All Listings by this Company

Tectite Classic and Tectite Pro ranges of DZR brass push-fit fittings The Tectite Classic range is for use with copper tube (manufactured to BS 2871) and PEX & polybutylene tube (manufactured to BS 2871). The fittings are supplied with plastic inserts. The Tectite Pro range is for use with copper tube (manufactured to BS 2871). Maximum working pressures & operating temperatures: Tectite Classic fittings with copper pipe: 16.0 bar @ 30°C, 10.0 bar @ 65°C & 6.0 bar @ 95°C. Tectite Classic fittings with PEX & Polybutylene: 12.0 bar @ 20°C, 6.0 bar @ 65°C & 3.0 bar @ 92°C. Tectite Pro fittings (15mm - 28mm): 20.0 bar @ 30°C, 16.0 bar @ 65°C & 10.0 bar 114°C. Tectite Pro fittings (32mm - 54mm): 16.0 @ 30°C, 10.0 bar 65°C & 6.0 bar @ 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1906106

Expiry date:

30/06/2024

Size:

10mm – 54mm

Marking:

Tectite, size & CR on fitting body.

Installation Requirements:

R001

Model:

Tectite Classic and Tectite Pro ranges

Factor:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

01302 560560

View All Listings by this Company

Profipress & Sanpress ranges of gunmetal, copper or bronze (press-fit) fittings, with EPDM `O` rings. For use with copper tube (manufactured to BS EN 1057). Sizes 64mm – 108mm incorporate a stainless-steel grab ring. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1906080

Expiry date:

30/06/2024

Size:

12,15,18, 22, 28, 35, 42, 54mm XL sizes 64, 66.7, 76.1, 88.9, 108 mm.

Marking:

Viega, size, DVGW on body

Installation Requirements:

R001

Model:

Profipress & Sanpress ranges consisting of: Elbows: 2416, 2416XL, 2416.1, 2416.1XL, 2426, 2426XL, 2426.1, 2426.1XL, 2427, 2428. T-pieces: 2418, 2418.1, 2418XL, 2417.2XL. Adapter pieces: 2411XL,2412XL Couplings: 2415, 2415XL, 2415.3, 2415.5XL Reductions: 2415.1, 2415.1XL, 2415.2, 2416.2, 2426.2. Caps & plugs: 2456, 2456XL, 2456.1XL, 2457. Flanges: 2459.5XL. Gunmetal CC499K or CC246E/CuSi4Zn9MnP Elbows: 2216, 2216.1, 2226, 2226.1. T-pieces: 2218, 2217.1, 2217.2, 2217.4. Adapter pieces: 2211, 2211.1, 2211.2, 2211.4, 2212, 2212.1, 2212.2, 2212.3, 2214, 2214.1, 2214.2, 2214.3, 2215.6. Couplings: 2215, 2215.5, 2215.4. Reductions: 2215.1. Screw fittings: 2260, 2262, 2265, 2255, 2263, 2264, 2267. Flanges: 2259.5. Wall plates: 2225, 2225.5, 2225.6, 2228.7, 2217.3. Wall lead-ins: 2232.1, 2232.3. Cross pieces: 2244, 2247, 2248. Mounting units: 2221, 2221.1, 2222, 2222.6EX, 2222.05, 2222.2, 2229. Compensator: 2251.

Factor:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Press-Inox range of stainless-steel crimped fittings with EPDM ‘O’ rings for use with stainless steel pipe (manufactured to EN10204). For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1907009

Expiry date:

31/07/2024

Size:

15mm - 108mm

Marking:

PI (abbreviation of Press-Inox) on body of fitting

Installation Requirements:

R001

Model:

Press-Inox range of fittings

Factor:

Anpro Pressfit PTE. Ltd

Company Name

Anpro Pressfit PTE. Ltd

Address

130 Second Lok Yang Road Singapore

View All Listings by this Company

Range of R-154 stainless steel pressed collars incorporating stainless steel bodies and are only to be used with stainless steel pipe. Maximum working pressure for sizes up to DN150 is 25.0 bar. Maximum working pressure for size DN200 is 16.0 bar. Maximum operating temperature 99°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1907036

Expiry date:

31/07/2024

Size:

DN 40 to DN 200

Marking:

Model, NORDS, size, material grading and pressure rating on fitting body

Installation Requirements:

R001

Model:

FCM0604420DHS. FCM0404420DHS. FCM0605420DHS. FCM0405420DHS. FCM0606920DHS. FCM0406920DHS. FCM0608420DHS. FCM0408420DHS. FCM0610630SPE. FCM0410630SPE. FCM0613130DHS. FCM0413130DHS. FCM0615630SPE. FCM0415630SPE. FCI0604820DHS. FCI0404820DHS. FCI0606020DHS. FCI0406020DHS. FCI0607620DHS. FCI0407620DHS. FCI0608820DHS. FCI0408820DHS. FCI0611430SPE. FCI0411430SPE. FCI0613930DHS. FCI0413930DHS. FCM0620630DHS. FCM0420630DHS. FCI0616826DHS. FCI0416826DHS. FCI0621930DHS. FCI0421930DHS.

Manufacturer:

Nords International AB

Company Name

Nords International AB

Address

Prostgaardsvagen 2 SE 655 60 MOLKOLM Sweden

View All Listings by this Company

Range of metric black, white or grey DMFit plastic pushfit fittings with EPDM ‘O’-rings for use with metric PEX barrier pipe manufactured to BS7291-2. Supplied with grey pipe inserts. Maximum operating parameters: 12.0 bar @cold water use only and 7.0 bar @ 65°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1907050

Expiry date:

31/07/2024

Note:

R008 applies to the white fittings only. The pipe inserts must be used when installing this system to maintain the validity of the approval

Size:

10, 15 & 22mm.

Marking:

DM and size on the fittings

Installation Requirements:

R001 R008

Model:

AFWC2210M: 22mm tube x 10mm tube, AMC1004M: 10mm tube x ¼” BSPT, AMC1006M: 10mm tube x ⅜” BSPT, AMC1007M: 10mm tube x ½” BSPT, AMC1506M: 15mm tube x ⅜” BSPT, AMC1507M: 15mm tube x ½” BSPT, AMC2209M: 22mm tube x ¾” BSPT, AEU1010M: 10mm tube x 10mm tube, AEU1515M: 15mm tube x 15mm tube, AEU2215M: 22mm tube x 15mm tube, AEU2222M: 22mm tube x 22mm tube, AME1004M: 10mm tube x ¼” BSPT, AME1006M: 10mm tube x ⅜” BSPT, AME1506M: 15mm tube x ⅜” BSPT, AME1507M: 15mm tube x ½” BSPT, AMES1004M: 10mm tube x ¼” BSPT, AMES1006M: 10mm tube x ⅜” BSPT, ARD1015M: 10mm tube x 15mm stem, ARD1522M: 15mm tube x 22mm stem, ATEU1010M: 10mm tube x 10mm stem, ATEU1515M: 15mm tube x 15mm tube, SATEU6766B: 15mm tube x 15mm tube (Long), ATEU2222M: 22mm tube x 22mm tube, AFA1004M: 10mm x ¼” BSPT, AFA1507M: 15mm x ½” BSPT, AFA1509M: 15mm x ¾” BSPT, AFA2209M: 22mm x ¾” BSPT, AFAUN101/2VM: 10mm x 1/2-16 UN, AMRS1004M: 10mm tube x ¼” BSPT, AMRS1006M: 10mm tube x ⅜” BSPT, AMRS1007M: 10mm tube x ½” BSPT, AMTS1004M: 10mm tube x ¼” BSPT, AMTS1006M: 10mm tube x ⅜” BSPT, AMTS1007M: 10mm tube x ½” BSPT, ASA1004M: 10mm stem x ¼” BSPT, ASA1006M: 10mm stem x ⅜” BSPT, ASA1007M: 10mm stem x ½” BSPT, ACR1010M: 10mm tube, ATU101010M: 10mm tube, ATU151010M: 15mm run x 10mm run x 10mm branch, ATU151510M: 15mm run x 15mm run x 10mm branch, ATU151515M: 15mm tube, ATU151522M: 15mm run x 15mm run x 22mm branch, ATU221515M: 22mm run x 15mm run x 15mm branch, ATU222210M: 22mm run x 22mm run x 10mm branch, ATU222215M: 22mm run x 22mm run x 15mm branch, ATU221522M: 22mm run x 15mm run x 22mm branch, ATU222222M: 22mm tube, AUB1010M: 10mm tube, AUB1515M: 15mm tube, AUB2222M: 22mm tube, AUC1010M: 10mm tube x 10mm tube, AUC1510M: 15mm tube x 10mm tube, AUC1515M: 15mm tube x 15mm tube, AUC2215M: 22mm tube x 15mm tube, AUC2222M: 22mm tube x 22mm tube, ATWD1010M: 10mm in & out, ATWD1515M: 15mm in & out, ATES10M: 10mm tube, ATES15M: 15mm tube, ATES22M: 22mm tube, APL10M: 10mm plug, APL15M: 15mm plug, APL22M: 22mm plug, AEL1510M: 10mm stem - 15mm tube, AEL2215M: 15mm stem - 22mm tube, ABU1010M: 10mm tube x 10mm tube, ABBC1507M: 15mm tube x ½" barb, ABBC2207M: 22mm tube x ½" barb, ABBC2209M: 22mm tube x ¾" barb, ABBC1510M: 15mm tube x 10mm barb, ABBC15M09: 15mm tube x 9mm barb, ABBC15M10: 15mm tube x 10mm barb, ABBC15M13: 15mm tube x 13mm barb, AEL15M07: ½" stem x 15mm tube, ASSA15M06: 15mm stem x ⅜" stem, ATBC15M06: 15mm stem x ⅜" barb, ATBC15M07: 15mm stem x ½" barb, ATC15M: 15mm tube, ATC22M: 22mm tube, Grey pipe Inserts: ATS10M: 10mm x 7mm, ATS15M: 15mm x 11.4mm, ATS22M: 22mm x 17.6mm. Models Added July 2020: AMC1002M: 10mm tube x ⅛” BSPT AEU2216M: 22mm tube x 16mm tube ARD1012M: 10mm tube x 12mm stem ARD1518M: 15mm tube x 18mm stem AMCB1004M: 10mm tube x ¼” BSP(P) AMCB1006M: 10mm tube x ⅜” BSP(P) AMCB1007M: 10mm tube x ½” BSP(P) AMCB1507M: 15mm tube x ½” BSP(P) AMCB1509M: 15mm tube x ¾” BSP(P) AMCB2209M: 22mm tube x ¾” BSP(P) AMESB1004M: 10mm tube x ¼” BSP(P) AMESB1006M: 10mm tube x ⅜” BSP(P) AMESB1007M: 10mm tube x ½” BSP(P) ATEU1012M: 10mm tube x 12mm stem AFA1002M: 10mm x 1/8” BSPT AFA2211M: 22mm x 1” BSPT AFAUN121/2VM: 12mm x 1/2-16 UN AFAUF107/16CM: 10mm x 7/16-20UNF-Cone Type AFAU107/16CM: 10mm x 7/16-24 UNS AFAB1006CM: 10mm tube x ⅜” BSP(P) Cone Type AFAB1007CM: 10mm tube x ½” BSP(P) Cone Type AFAB1008CM: 10mm tube x 5/8” BSP(P) Cone Type AFAB1004FM: 10mm tube x ¼” BSP(P) Flat Type AFAB1009FM: 10mm tube x ¾” BSP(P) Flat Type AFAB1209FM: 12mm tube x ¾” BSP(P) Flat Type AFAB1007FM: 10mm tube x ½” BSP(P) Flat Type AFAB1008FM: 10mm tube x 5/8” BSP(P) Flat Type AFAB1009FM: 10mm tube x ¾” BSP(P) Flat Type AFAB1507M: 15mm tube x ½” BSP(P) AFAB1509M: 15mm tube x ¾” BSP(P) AFAB2209M: 22mm tube x ¾” BSP(P) AFAUF107/16VM: 10mm x 7/16-20UNF-V Type AFAUF105/8VM: 10mm x 5/8-18UNF-V Type AMRSB1004M: 10mm tube x ¼” BSP(P) AMRSB1006M: 10mm tube x ⅜” BSP(P) AMRSB1007M: 10mm tube x ½” BSP(P) AMTSB1206M: 12mm tube x ⅜” BSP(P) AMTSB1207M: 12mm tube x ½” BSP(P) AOC1006M: 10mm tube x 6mm tube AMTS1004M: 10mm tube x ¼” BSPT AMTS1006M: 10mm tube x ⅜” BSPT AMTS1007M: 10mm tube x ½” BSPT ASAB1004M: 10mm stem x ¼” BSP(P) ASAB1006M: 10mm stem x ⅜” BSP(P) ASAB1007M: 10mm stem x ½” BSP(P) ASAB1506M: 15mm stem x ⅜” BSP(P) ASAB1507M: 15mm stem x ½" BSP(P) ASAB2207M: 22mm stem x ½" BSP(P) ASAB2209M: 22mm stem x ¾” BSP(P) ACR1212M: 12mm tube ATHWD1210M: 12mm tube x 10mm tube ATU151512M: 15mm run x 15mm run x 12mm branch ATU221616M: 22mm run x 16mm run x 16mm branch ATU222216M: 22mm run x 22mm run x 16mm branch AUC1512M: 15mm tube x 12mm tube AUC2216M: 22mm tube x 16mm tube ATWD1012M: 10mm in & 12mm out AEL1510M: 10mm stem - 15mm tube AEL1610M: 10mm stem - 16mm tube ABU1212M: 12mm tube ABBC1607M: 16mm tube x ½" barb ABBC1201M: 12mm tube x 10mm barb ABBC1610M: 16mm tube x 10mm barb ACM15M06: 15mm x ⅜" x ⅜" manifold APSUC15M07: 15mm power x ½" tube ARD0615M: 15mm stem x ⅜" tube ARD1512M: 15mm stem x 12mm tube AEL16M07: 16mm x ½" tube AEL18M07: ½" stem x 18mm tube ATU15M0606: 15mm tube x ⅜" tube x ⅜" tube ATU1515M06: 15mm tube x 15mm tube x ⅜" tube ATU1616M07: 16mm tube x 16mm tube x ½" tube ATU18M0606: 18mm run x ⅜" run x ⅜" branch AUC12M06: 12mm tube x ⅜" tube AUC15M04: 15mm tube x ¼" tube AUC15M07: 15mm tube x ½" tube ASEU1507M: 15mm tube x 1/2"BSP(P) ASEU1509M: 15mm tube x 3/4"BSP(P) ASUC1507M: 15mm tube x 1/2"BSP(P) ASUC1509M: 15mm tube x 3/4"BSP(P) ASUC2209M: 22mm tube x 3/4"BSP(P) AEFCB1507M: 15mm tube x 1/2"BSP(P) ASFCB1507M: 15mm tube x 1/2"BSP(P) ASFCB1509M: 15mm tube x 3/4"BSP(P) ASFCB2209M: 22mm tube x 3/4"BSP(P)

Factor:

The Fluidconnections Co. (UK) Ltd

Company Name

The Fluidconnections Co. (UK) Ltd

Address

Rufford House, Darwin Drive, Sherwood Energy Village

Postcode

NG22 9GW

Country

New Ollerton,

Phone

+44 (0) 1623 836 814

View All Listings by this Company

Manufacturer:

DMT

Company Name

DMT

Address

143B-3L Namdong-Gu Incheon

Country

Korea

View All Listings by this Company

Range of copper crimped fittings with EPDM ‘O’-rings (except for 149ENM, 303ENM and 304ENM models) for use with copper pipe. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1909015

Expiry date:

30/09/2024

Size:

12mm - 108mm.

Marking:

Zhuji City Howhi Air Conditioners Made Co., Ltd. Logo and size on body.

Installation Requirements:

R001

Model:

100ENM - Copper Press Straight Coupling PxP: 100ENM12AB - 12mm 100ENM15AB - 15mm 100ENM18AB - 18mm 100ENM22AB - 22mm 100ENM28AB - 28mm 100ENM35AB - 35mm 100ENM42AB - 42mm 100ENM54AB - 54mm 100ENM67AB - 66.7mm 100ENM76AB - 76.1mm 100ENM89AB - 88.9mm 100ENM108AB - 108mm 101ENM - Copper Press Reducing Coupling PxP: 101ENM1512AB - 15mm×12mm 101ENM1514AB - 15mm×14mm 101ENM1615AB - 16mm×15mm 101ENM1812AB - 18mm×12mm 101ENM1815AB - 18mm×15mm 101ENM1817AB - 18mm×17mm 101ENM2215AB - 22mm×15mm 101ENM2218AB - 22mm×18mm 101ENM2815AB - 28mm×15mm 101ENM2818AB - 28mm×18mm 101ENM2822AB - 28mm×22mm 101ENM3522AB - 35mm×22mm 101ENM3528AB - 35mm×28mm 101ENM4222AB - 42mm×22mm 101ENM4228AB - 42mm×28mm 101ENM4235AB - 42mm×35mm 101ENM5428AB - 54mm×28mm 101ENM5435AB - 54mm×35mm 101ENM5442AB - 54mm×42mm 102ENM - Copper Press Fitting Reducer FTGxP: 102ENM1512AB - 15mm×12mm 102ENM1812AB - 18mm×12 mm 102ENM1815AB - 18mm×15mm 102ENM2215AB - 22mm×15mm 102ENM2218AB - 22mm×18mm 102ENM2815AB - 28mm×15mm 102ENM2818AB - 28mm×18mm 102ENM2822AB - 28mm×22mm 102ENM3522AB - 35mm×22 mm 102ENM3528AB - 35mm×28 mm 102ENM4222AB - 42mm×22mm 102ENM4228AB - 42mm×28mm 102ENM4235AB - 42mm×35mm 102ENM5428AB - 54mm×28mm 102ENM5435AB - 54mm×35mm 102ENM5442AB - 54mm×42mm 102ENM6728AB - 66.7mm×28mm 102ENM6735AB - 66.7mm×35mm 102ENM6742AB - 66.7mm×42mm 102ENM6754AB - 66.7mm×54mm 102ENM7635AB - 76.1mm×35mm 102ENM7642AB - 76.1mm×42mm 102ENM7654AB - 76.1mm×54mm 102ENM7667AB - 76.1mm×66.7mm 102ENM8954AB - 88.9mm×54mm 102ENM8976AB - 88.9mm×76.1mm 102ENM10842AB - 108mm×42mm 102ENM10854AB - 108mm×54mm 102ENM10867AB - 108mm×66.7mm 102ENM10876AB - 108mm×76.1mm 102ENM10889AB - 108mm×88.9mm 103ENM - Copper Press Elbow - 90°PxP: 103ENM12AB - 12mm 103ENM15AB - 15mm 103ENM18AB - 18mm 103ENM22AB - 22mm 103ENM28AB - 28mm 103ENM35AB - 35mm 103ENM42AB - 42mm 103ENM54AB - 54mm 103ENM67AB - 66.7mm 103ENM76AB - 76.1mm 103ENM89AB - 88.9mm 103ENM108AB - 108mm 104ENM - Copper Press Elbow - 90°(Male / Female) FTGxP: 104ENM12AB - 12mm 104ENM15AB - 15mm 104ENM18AB - 18mm 104ENM22AB - 22mm 104ENM28AB - 28mm 104ENM35AB - 35mm 104ENM42AB - 42mm 104ENM54AB - 54mm 104ENM67AB - 66.7mm 104ENM76AB - 76.1mm 104ENM89AB - 88.9mm 104ENM108AB - 108mm 107ENM - Copper Press Elbow - 45°PxP: 107ENM12AB - 12mm 107ENM15AB - 15mm 107ENM18AB - 18mm 107ENM22AB - 22mm 107ENM28AB - 28mm 107ENM35AB - 35mm 107ENM42AB - 42mm 107ENM54AB - 54mm 107ENM67AB - 66.7mm 107ENM76AB - 76.1mm 107ENM89AB - 88.9mm 107ENM108AB - 108mm 108ENM - Copper Press Elbow - 45°(Male / Female) FTGxP: 108ENM12AB - 12mm 108ENM15AB - 15mm 108ENM18AB - 18mm 108ENM22AB - 22mm 108ENM28AB - 28mm 108ENM35AB - 35mm 108ENM42AB - 42mm 108ENM54AB - 54mm 108ENM67AB - 66.7mm 108ENM76AB - 76.1mm 108ENM89AB - 88.9mm 108ENM108AB - 108mm 111ENM - Copper Press Slip Extended Coupling PxP: 111ENM12AL - 12mm 111ENM15AL - 15mm 111ENM18AL - 18mm 111ENM22AL - 22mm 111ENM28AL - 28mm 111ENM35AL - 35mm 111ENM42AL - 42mm 111ENM54AL - 54mm 111ENM67AL - 66.7mm 111ENM76AL - 76.1mm 111ENM89AL - 88.9mm 111ENM108AL - 108mm 112ENM - Copper Press Equal Tee PxPxP: 112ENM12AB - 12mm 112ENM15AB - 15mm 112ENM18AB - 18mm 112ENM22AB - 22mm 112ENM28AB - 28mm 112ENM35AB - 35mm 112ENM42AB - 42mm 112ENM54AB - 54mm 112ENM67AB - 66.7mm 112ENM76AB - 76.1mm 112ENM89AB - 88.9mm 112ENM108AB - 108mm 113ENM - Copper Press Unequal Tee PxPxP: 113ENM151512AB - 15mm×15mm×12mm 113ENM181812AB - 18mm×18mm×12mm 113ENM181815AB - 18mm×18mm×15mm 113ENM222212AB - 22mm×22mm×12mm 113ENM222215AB - 22mm×22mm×15mm 113ENM222218AB - 22mm×22mm×18mm 113ENM282815AB - 28mm×28mm×15mm 113ENM282818AB - 28mm×28mm×18mm 113ENM282822AB - 28mm×28mm×22mm 113ENM353515AB - 35mm×35mm×15mm 113ENM353522AB - 35mm×35mm×22mm 113ENM353528AB - 35mm×35mm×28mm 113ENM424215AB - 42mm×42mm×15mm 113ENM424222AB - 42mm×42mm×22mm 113ENM424228AB - 42mm×42mm×28mm 113ENM424235AB - 42mm×42mm×35mm 113ENM545415AB - 54mm×54mm×15mm 113ENM545422AB - 54mm×54mm×22mm 113ENM545428AB - 54mm×54mm×28mm 113ENM545435AB - 54mm×54mm×35mm 113ENM545442AB - 54mm×54mm×42mm 113ENM676728AB - 66.7mm×66.7mm×28mm 113ENM676735AB - 66.7mm×66.7mm×35mm 113ENM676742AB - 66.7mm×66.7mm×42mm 113ENM676754AB - 66.7mm×66.7mm×54mm 113ENM767622AB - 76.1mm×76.1mm×22mm 113ENM767628AB - 76.1mm×76.1mm×28mm 113ENM767635AB - 76.1mm×76.1mm×35mm 113ENM767642AB - 76.1mm×76.1mm×42mm 113ENM767654AB - 76.1mm×76.1mm×54mm 113ENM767667AB - 76.1mm×76.1mm×66.7mm 113ENM898954AB - 88.9mm×88.9mm×54mm 113ENM898976AB - 88.9mm×88.9mm×76.1mm 113ENM10810854AB - 108mm×108mm×54mm 113ENM10810867AB - 108mm×108mm×66.7mm 113ENM10810876AB - 108mm×108mm×76.1mm 113ENM10810889AB - 108mm×108mm×89mm 114ENM151212AB - 15mm×12mm×12mm 114ENM151215AB - 15mm×12mm×15mm 114ENM181515AB - 18mm×15mm×15mm 114ENM181518AB - 18mm×15mm×18mm 114ENM221515AB - 22mm×15mm×15mm 114ENM221518AB - 22mm×15mm×18mm 114ENM221522AB - 22mm×15mm×22mm 114ENM221818AB - 22mm×18mm×18mm 114ENM221822AB - 22mm×18mm×22mm 114ENM281528AB - 28mm×15mm×28mm 114ENM282215AB - 28mm×22mm×15mm 114ENM282222AB - 28mm×22mm×22mm 114ENM282228AB - 28mm×22mm×28mm 114ENM352822AB - 35mm×28mm×22mm 114ENM352828AB - 35mm×28mm×28mm 114ENM423542AB - 42mm×35mm×42mm 114ENM542854AB - 54mm×28mm×54mm 115ENM - Copper Press Unequal Tee PxPxP: 115ENM151522AB - 15mm×15mm×22mm 121ENM - Copper Press Reducing Elbow - 90°PxP: 121ENM2215AB - 22mm×15mm 137ENM - Copper Press End Cap P: 137ENM12AB - 12mm 137ENM15AB - 15mm 137ENM18AB - 18mm 137ENM22AB - 22mm 137ENM28AB - 28mm 137ENM35AB - 35mm 137ENM42AB - 42mm 137ENM54AB - 54mm 137ENM67AB - 66.7mm 137ENM76AB - 76.1mm 137ENM89AB - 88.9mm 137ENM108AB - 108mm 138ENM - Copper Press Full crossover P x P: 138ENM15AB - 15mm 138ENM18AB - 18mm 138ENM22AB - 22mm 148ENM - Copper Press Partial crossover FTGxP: 148ENM12AB - 12mm 148ENM15AB - 15mm 148ENM18AB - 18mm 148ENM22AB - 22mm 149ENM - Copper Press Street crossover FTGxFTG: 149ENM15AB - 15mm 149ENM18AB - 18mm 149ENM22AB - 22mm 301ENM - Copper Press Adapter - male thread P x R: 301ENM1210AB - 12mm×3/8" 301ENM1213AB - 12mm×1/2" 301ENM1510AB - 15mm×3/8" 301ENM1513AB - 15mm×1/2" 301ENM1519AB - 15mm×3/4" 301ENM1813AB - 18mm×1/2" 301ENM1819AB - 18mm×3/4" 301ENM2213AB - 22mm×1/2" 301ENM2219AB - 22mm×3/4" 301ENM2225AB - 22mm×1" 301ENM2819AB - 28mm×3/4" 301ENM2825AB - 28mm×1" 301ENM2832AB - 28mm×1-1/4" 301ENM3525AB - 35mm×1" 301ENM3532AB - 35mm×1-1/4" 301ENM4232AB - 42mm×1-1/4" 301ENM4238AB - 42mm×1-1/2" 301ENM5451AB - 54mm×2" 301ENM6764AB - 66.7mm×2-1/2" 301ENM7664AB - 76.1mm×2-1/2" 301ENM7676AB - 76.1mm×3" 301ENM8976AB - 88.9mm×3" 301ENM108102AB - 108mm×4" 302ENM - Copper Press Adapter - Female thread P x Rp: 302ENM1210AB - 12mm×3/8" 302ENM1213AB - 12mm×1/2" 302ENM1510AB - 15mm×3/8" 302ENM1513AB - 15mm×1/2" 302ENM1519AB - 15mm×3/4" 302ENM1819AB - 18mm×3/4" 302ENM2213AB - 22mm×1/2" 302ENM2219AB - 22mm×3/4" 302ENM2225AB - 22mm×1" 302ENM2819AB - 28mm×3/4" 302ENM2825AB - 28mm×1" 302ENM3532AB - 35mm×1-1/4" 302ENM4238AB - 42mm×1-1/2" 302ENM5451AB - 54mm×2" 302ENM6764AB - 66.7mm×2-1/2" 302ENM7664AB - 76.1mm×2-1/2" 302ENM7676AB - 76.1mm×3" 302ENM8976AB - 88.9mm×3" 302ENM108102AB - 108mm×4" 303ENM - Copper Press Adapter - male thread FTG x R: 303ENM1513AB - 15mm×1/2" 303ENM2213AB - 22mm×1/2" 303ENM2219AB - 22mm×3/4" 304ENM - Copper Press Adapter - Female thread FTG x Rp: 304ENM1513AB - 15mm×1/2" 304ENM2213AB - 22mm×1/2" 304ENM2219AB - 22mm×3/4" 304ENM3525AB - 35mm×1" 304ENM5451AB - 54mm×2" 313ENM - Copper Press Adapter Tee - female thread on branch P x P x Rp: 313ENM121213AB - 12mm×12mm×1/2" 313ENM151513AB - 15mm×15mm×1/2" 313ENM181813AB - 18mm×18mm×1/2" 313ENM222213AB - 22mm×22mm×1/2" 313ENM222219AB - 22mm×22mm×3/4" 313ENM282813AB - 28mm×28mm×1/2" 313ENM282819AB - 28mm×28mm×3/4" 313ENM353513AB - 35mm×35mm×1/2" 313ENM424213AB - 42mm×42mm×1/2" 313ENM545413AB - 54mm×54mm×1/2" 314ENM - Copper Press Adapter 90° Elbow - male thread P x R: 314ENM1513AB - 15mm×1/2" 314ENM1813AB - 18mm×1/2" 314ENM2219AB - 22mm×3/4" 314ENM2825AB - 28mm×1" 315ENM1513AB - 15mm×1/2" 315ENM1813AB - 18mm×1/2" 315ENM2219AB - 22mm×3/4" 315ENM2825AB - 28mm×1"

Manufacturer:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Range of push-fit fittings with polypropylene bodies and NBR seals for use with copper, BS7291 polybutylene and PEX pipe. Cold water use only. Maximum working pressure 16.0 bar.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1909382

Expiry date:

30/09/2024

Note:

Above ground use only

Size:

See Model

Marking:

Plasson and size on body

Installation Requirements:

R001

Model:

1001CU - Copper coupler: 20mm x 15mm - 32mm x 28mm. 1001M - Metric/imperial coupler: 20mm x ½” - 32mm x 1”. 1001U - Coupling: 20mm x 20mm - 63mm x 63mm. 1002C - Copper pipe male adaptor: - 15mm x ¾” - 28mm x 1”. 1002G - Male meter adaptor: 15mm - ¾”. 1002U - Male adaptor: 20mm x ½” - 63mm x 2”. 1003C - Female copper adaptor: 15mm x ¾” - 22mm x ¾”. 1003U - Male adaptor: 20mm x ½” - 63mm x 2”. 1004U - Tee: 20mm x 20mm x 20mm - 63mm x 63mm x 63mm. 1005M - Metric/Imperial elbow: 25mm x ½” - 25mm x ¾”. 1005U - Elbow: 20mm x 20mm - 63mm x 63mm. 1011U - Reducing coupler: 25mm x 20mm - 63mm x 50mm. 1012 - End plug: 20mm - 32mm. 1012U - End plug: 40mm - 63mm. 1014U - Female tee: 25mm x ¾” x 25mm - 32mm x 1” x 32mm. 1015U - Female elbow: 20mm x ½” - 32mm x 1”. 1034U - Reducing tee: 25mm x 20mm x 25mm - 32mm x 25mm x 32mm. 1051U - Reducing elbow 25mm x 20mm. 1075U - Wall plate elbow: 20mm x ½” - 25mm x ¾”. 1085U - Male elbow: 20mm x ½” - 63mm x 2”. 8

Factor:

Plasson UK Ltd

Company Name

Plasson UK Ltd

Address

Plasson House 27 Albert Drive Burgess Hill

Postcode

RH15 9TN

Country

West Sussex

Phone

+44 (0) 1444 244 446

General Email

sales@plasson.co.uk

View All Listings by this Company