Range of push-fit fittings with polypropylene bodies and NBR seals for use with copper, BS7291 polybutylene and PEX pipe. Cold water use only. Maximum working pressure 16.0 bar.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

1909382

Expiry date:

30/09/2024

Note:

Above ground use only

Size:

See Model

Marking:

Plasson and size on body

Installation Requirements:

R001

Model:

1001CU - Copper coupler: 20mm x 15mm - 32mm x 28mm. 1001M - Metric/imperial coupler: 20mm x ½” - 32mm x 1”. 1001U - Coupling: 20mm x 20mm - 63mm x 63mm. 1002C - Copper pipe male adaptor: - 15mm x ¾” - 28mm x 1”. 1002G - Male meter adaptor: 15mm - ¾”. 1002U - Male adaptor: 20mm x ½” - 63mm x 2”. 1003C - Female copper adaptor: 15mm x ¾” - 22mm x ¾”. 1003U - Male adaptor: 20mm x ½” - 63mm x 2”. 1004U - Tee: 20mm x 20mm x 20mm - 63mm x 63mm x 63mm. 1005M - Metric/Imperial elbow: 25mm x ½” - 25mm x ¾”. 1005U - Elbow: 20mm x 20mm - 63mm x 63mm. 1011U - Reducing coupler: 25mm x 20mm - 63mm x 50mm. 1012 - End plug: 20mm - 32mm. 1012U - End plug: 40mm - 63mm. 1014U - Female tee: 25mm x ¾” x 25mm - 32mm x 1” x 32mm. 1015U - Female elbow: 20mm x ½” - 32mm x 1”. 1034U - Reducing tee: 25mm x 20mm x 25mm - 32mm x 25mm x 32mm. 1051U - Reducing elbow 25mm x 20mm. 1075U - Wall plate elbow: 20mm x ½” - 25mm x ¾”. 1085U - Male elbow: 20mm x ½” - 63mm x 2”. 8

Factor:

Plasson UK Ltd

Company Name

Plasson UK Ltd

Address

Plasson House 27 Albert Drive Burgess Hill

Postcode

RH15 9TN

Phone

+44 (0) 1444 244 446

General Email

sales@plasson.co.uk

View All Listings by this Company

Range of screw down stop valves with plastic bodies and NBR seals . Model 0341U is for use with polyethylene pipe (manufactured to EN 12201) and model 03410 is for use with polyethylene pipe (manufactured to EN 12201) copper tube (EN1057 Black Label), PEX and PB to (BS7291). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

2320 Valves

Section Subtitle:

Stop, plastic, screw down.

WRAS Approval Number:

1910314

Expiry date:

31/10/2024

Marking:

Plasson, size and flow arrow on body

Installation Requirements:

R001

Model:

0341U – 20mm, 25mm, 32mm push fit 03410 – 15mm x20mm, 22mmx25mm, 28mmx32mm push fit.

Factor:

Plasson UK Ltd

Company Name

Plasson UK Ltd

Address

Plasson House 27 Albert Drive Burgess Hill

Postcode

RH15 9TN

Phone

+44 (0) 1444 244 446

General Email

sales@plasson.co.uk

View All Listings by this Company