Combination Tap Assemblies

Section Code 0550 : Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#1907901

Range of two hole single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907901
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
VAL DSM C CD & VAL DSM C 6 CD
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1907913

Range of two hole single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907913
Expiry date:
31/07/2024
Size:
1/2" BSP (M)
Marking:
'SWAN' logo on operating member
Installation Requirements:
R001 R006 R010
Model:
C58119
Factor:
Wolseley
Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval

#1909308

Range of two-hole, single outlet (swivel) combination tap assemblies (brass bodies with various finishes). Incorporating ceramic cartridge headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909308
Expiry date:
30/09/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½”
Marking:
1810 on operating member
Installation Requirements:
R001 R006 R010
Model:
FIN/01/CH - Chrome FIN/02/BS - Brushed Steel FIN/04/COP - Copper FIN/05/GM - Gunmetal FIN/06/GB - Gold
Factor:
The 1810 Company limited
Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

Print This Approval

#1909042

SECURITOUCH range of wall mounted two hole, single outlet mixer taps with swivel spouts (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The outlets incorporate a plastic flow straightener. Some of the models have flow control features in the offset unions. Model 2445EPS incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909042
Expiry date:
30/09/2024
Size:
¾” to ½” offset unions
Marking:
DELABIE on operating member
Installation Requirements:
R001 R010 R040
Model:
2445 SECURITOUCH, 2445L SECURITOUCH, 2445EP SECURITOUCH, 2445LEP SECURITOUCH, 2445S SECURITOUCH, 2445LS SECURITOUCH, 2445EPS SECURITOUCH, 2445LEPS SECURITOUCH.
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval

#1910703

Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating either a ¼ turn ceramic disc (model 351908) or a non-rising spindle (models 4M3915 & 390905) headworks with either cross top (model 350905), dome type (model 4M3915) or single lever (model 351908) operating members. The products are supplied with both an aerator and flow straightener and metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910703
Expiry date:
31/10/2024
Size:
½” BSP (M)
Marking:
Mercia (brand of Comap) on rear of Body
Installation Requirements:
R001 R006 R010
Model:
350905 Mercia Cross Top Deck Sink Mixer, 4M3915 Mercia Modern Deck Sink Mixer & 391908 Mercia QT Deck Sink Mixer
Factor:
Comap UK Limited
Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT
Country
Leigh

View All Listings by this Company
Manufacturer:
COMAP (JIANGMEN)
Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 2 of 14

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.