Two hole, single outlet swivel combination tap assembly (chrome plated brass), incorporating non-rising spindle headworks with dome operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2105905

Expiry date:

31/05/2026

Size:

½” BSP (M)

Marking:

Bristan on the operating member.

Installation Requirements:

R001 R006 R010

Model:

VAC2 DSM C MT

Factor:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon

Postcode

B78 1SG

Country

Tamworth

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Two hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating non rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2105906

Expiry date:

31/05/2026

Size:

½” BSP (M)

Marking:

Bristan on the operating member.

Installation Requirements:

R001 R006 R010

Model:

VAX2 DSM C

Factor:

Bristan Group Limited

Company Name

Bristan Group Limited

Address

Birch Coppice Business Park Pooley Hall Drive Dordon

Postcode

B78 1SG

Country

Tamworth

Phone

01827 254144

General Email

enquire@bristan.com

View All Listings by this Company

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn rising spindle headworks with single lever operating members. The S8215AA model is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2105003

Expiry date:

31/05/2026

Size:

S8215AA: ½” BSP (M). S8205AA: 15mm compression.

Marking:

Armitage shanks on operating members

Installation Requirements:

R001 R010 R040

Model:

S8215AA Markwik wall mounted mixer. S8205AA Markwik wall mounted mixer.

Factor:

Armitage Shanks Ltd

Company Name

Armitage Shanks Ltd

Address

View All Listings by this Company

Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with various operating members (see model). The spout outlets of the SH-T80541 & SH-T80542 models incorporate a plastic flow straightener, all other models incorporate a plastic aerator. The products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107022

Expiry date:

31/07/2026

Size:

SH-T80541 & SH-T80542 models: ¾” BSP (M). All other models: ½” BSP (M).

Marking:

QIXI and WRAS on body

Installation Requirements:

R001 R006 R010

Model:

Single Lever: SH-T80541 SH-T81050B SH-T81086 SH-T80681L Cross Top: SH-T80681A SH-T81050 SH-T81079 SH-T80542 SH-T81050A Dome Type: SH-T80681

Manufacturer:

Zhejiang Qixi Sanitary Co., Ltd

Company Name

Zhejiang Qixi Sanitary Co., Ltd

Address

Huxin Industrial Area, Chumen Yuhuan Zhejiang

Country

China

Phone

189 685 872 326

View All Listings by this Company

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107024

Expiry date:

31/07/2026

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 10mm spigot end connections.

Marking:

Dornbracht on base of spout.

Installation Requirements:

R001 R006 R007 R009 R010

Model:

32800790

Manufacturer:

Aloys F Dornbracht GmbH & Co KG

Company Name

Aloys F Dornbracht GmbH & Co KG

Address

Koebbingser Muehle 6 D-58640 Iserlohn Germany

Phone

+49 2371 433 0

View All Listings by this Company

Range of two-hole, single outlet (swivel) combination tap assemblies (brass body - various finishes), incorporating quarter turn ceramic disc headworks with either single lever or wheel operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2107095

Expiry date:

31/07/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.

Marking:

1810 on body

Installation Requirements:

R001 R006 R010

Model:

Wheel operating members: HH-BM/01/CH (Chrome), HH-BM/02/BS (Brushed Steel), HH-BM/04/COP (Copper), HH-BM/05/GM (Gunmetal), HH-BM/06/GB (Gold), HH-BM/07/MB (Matt Black), HH-BM/08/BGB (Brushed Gold), Single lever operating members: MOU/01/CH (Chrome), MOU/02/BS (Brushed Steel), MOU/04/COP (Copper), MOU/05/GM (Gunmetal), MOU/06/GB (Gold), MOU/07/MB (Matt Black), MOU/08/BGB (Brushed Gold).

Factor:

The 1810 Company limited

Company Name

The 1810 Company limited

Address

Units 14-16, Bromfield Industrial Estate, Queens Lane Mold

Postcode

CH7 1JR

Phone

0044 7772144600

View All Listings by this Company

Range of two-hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headwork with either single lever or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109003

Expiry date:

30/09/2026

Size:

½” BSP (M)

Marking:

Booth & Co. (brand of Vado) on indice

Installation Requirements:

R001 R006 R010

Model:

BC-AXB-153-CP BC-AXB-153-BN BC-AXB-253-CP BC-AXB-253-BN

Manufacturer:

Vado

Company Name

Vado

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

Somerset

Phone

Tel: 01934 744466

View All Listings by this Company

Range of two-hole, single outlet (swivel) combination tap assemblies (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever or dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109047

Expiry date:

30/09/2026

Marking:

AXCES by VADO on Body

Installation Requirements:

R001 R006 R010

Model:

AX-AST-153/CD-CP AX-AST-353-CP

Manufacturer:

Vado

Company Name

Vado

Address

Cheddar Business Park Wedmore Road Cheddar

Postcode

BS27 3EB

Country

Somerset

Phone

Tel: 01934 744466

View All Listings by this Company

Two hole, single outlet (swivel) combination tap assembly (various finishes) incorporating quarter turn ceramic disk headwork with cross-top operating members. The inlets incorporate approved single check cartridges however the complete assembly has not been tested to demonstrate it provides back flow prevention. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2109908

Expiry date:

30/09/2026

Size:

½” BSP (M)

Marking:

Bristan Colonial on indice

Installation Requirements:

R001 R006 R010

Model:

K BRSNK C (Chrome) K BRSNK BN (Brush Nickle) K BRSNK ABRZ (Antique Bronze)

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company