Combination Tap Assemblies

Section Code 0470 : Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#1906134

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with either a single lever or cross-top operating members. The spout outlets incorporate a plastic aerator or a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906134
Expiry date:
30/06/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.
Marking:
ebb & flo (Trademark of Toolstation) on rear of tap body
Installation Requirements:
R001 R006 R010
Model:
69736 Porth Mono Mixwer Kitchen Tap
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET

View All Listings by this Company

Print This Approval

#1905088

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905088
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
Marking:
ebb & flo (Trademark of Toolstation) on rear of tap body
Installation Requirements:
R001 R006 R010
Model:
14780 CHESIL MONO MIXER KITCHEN TAP & 38515 FILEY MONO MIXER KITCHEN TAP
Factor:
TOOLSTATION LTD
Company Name
TOOLSTATION LTD
Address
EXPRESS PARK BRISTOL ROAD BRIDGEWATER
Postcode
TA6 4RN
Country
SOMERSET

View All Listings by this Company

Print This Approval

#2006800

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006800
Expiry date:
30/06/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies with EPDM washer and ½” captive nut end connections
Marking:
PPI on rear of body
Installation Requirements:
R001 R006 R010
Model:
M33247A & M33247B
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#2003801

Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating members. The outlets incorporate a plastic flow straightener (M96012AA) or plastic aerator (M96012C). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003801
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
PPI on rear of body
Installation Requirements:
R001 R006 R010
Model:
M96012AA & M96012C
Manufacturer:
PPI Xiamen Industry Co Ltd
Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

Print This Approval

#1911039

A range of single-hole single outlet swivel combination tap assemblies with stainless steel bodies. Incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerator. Both models are supplied with brass back nuts and both inlets incorporate gaskets that incorporate stainless steel strainer. Maximum working pressure 5.0 bar. Maximum working temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911039
Expiry date:
30/11/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nuts.
Marking:
Blanco on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
523120 - Lanora. 523122 - Candor
Factor:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

Print This Approval

#1911041

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911041
Expiry date:
30/11/2024
Size:
Stainless steel braided, thermoplastic lined flexible hose with ½” captive end connections and EPDM seals
Marking:
Blanco on operating member.
Installation Requirements:
R001 R006 R009 r010
Model:
BM3135
Factor:
Blanco Limited
Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

Print This Approval

#1911906

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating either a ceramic cartridge headwork (INF-VIV-001) with a single lever operating member or ¼ turn ceramic disc headworks (INF-VIE-001) with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911906
Expiry date:
30/11/2024
Size:
Stainless steel braided EPDM lined hose assemblies incorporating ½” captive nut end connections
Marking:
INF-VIV-001 - INFINITA REGISTERED TRADEMARK OF FORTIS ON OPERATING MEMBER INF-VIE-001 - INFINITA REGISTERED TRADEMARK OF FORTIS ON BODY
Installation Requirements:
R001 R006 R010
Model:
INF-VIV-001 INF-VIE-001
Factor:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval

#1911910

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a 15x15mm compression single check valve assembly (suitable for backflow protection against Fluid Category 2) which also incorporates an isolation valve, intended for installation at each inlet. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911910
Expiry date:
30/11/2024
Size:
Stainless steel braided EPDM lined hose assemblies with ½” captive nut end connections.
Marking:
Bristan on operating member
Installation Requirements:
R001 R006
Model:
RSP EFSNK C – Raspberry EasyFit Sink Mixer Chrome RSP EFSNK C TO – Raspberry EasyFit Sink Mixer Chrome Tap Only
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1911351

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with under counter near boiling water unit. Flow is controlled by a ceramic cartridge headwork with a single lever operating member. Instantaneous near boiling water is controlled by a self-closing quarter turn ceramic disc headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The boiler unit which incorporates a stainless steel tank and heating element is fed via a cold water supply. Maximum working pressure 7.0 bar. Maximum operating temperature 95°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1911351
Expiry date:
30/11/2024
Note:
IRN 009 & IRN R010 applies to hot and cold inlet hoses to the mixed water supply. The product is only supplied with inlet hoses into the tap itself, no other ancillary connections, components or hoses are provided. The installer must source these themselves.
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections (hot and cold supplies to mixed water). Stainless steel braided EPDM lined flexible hose assembly with ⅜” captive nut end connections (near boiling water inlet to tap). ½” BSP (M) (to under counter unit).
Marking:
Gettai on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
GT6002CP-A or GT6002CP-B taps to be used in conjunction with HWA15A&B-E undercounter near boiling water units.
Factor:
Foshan Shunde Gettai Sanitary Products Co., Ltd
Company Name
Foshan Shunde Gettai Sanitary Products Co., Ltd
Address
No 12 Huatian Road Huakou, Ronggui Shunde, Foshan City
Country
China

View All Listings by this Company

Print This Approval

#1912313

Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and either single lever,or cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1912313
Expiry date:
31/12/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
DTC (brand of Methven) on body
Installation Requirements:
R001 R006 R010
Model:
MOT113. INS120.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 6 of 52

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.