Combination Tap Assemblies

Section Code 0470 : Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

#1910051

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straighter. The inlet hoses incorporate a combined stainless steel strainer and rubber washer. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910051
Expiry date:
31/10/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
LOTA on body.
Installation Requirements:
R001 R006 R009 R010
Model:
60108-7201
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval

#1910902

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910902
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
Cascade logo on operating member
Installation Requirements:
R001 R006 R010
Model:
013.1120.3
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1910904

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium or nickel plated), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener (models CNN EFSNK C & CNN EFSNK C TO) all other models incorporate a plastic aerator . Supplied with single check valves, verified by test (suitable for backflow protection against Fluid Category 2) incorporating a servicing valve. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910904
Expiry date:
31/10/2024
Note:
Tap only models are sold without the EasyFit base or connection hoses, but are only compatible with EF KIT PK
Size:
15mm compression to combined isolation valve/check valve
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Model:
BLB EFSNK C, BLB EFSNK C TO (Tap only), CNN EFSNK C, CNN EFSNK C TO (Tap only), LMN EFSNK C, LMN EFSNK C TO (Tap only), LMN EFSNK BN (Brushed nickel), LMN EFSNK BN TO (Tap only, brushed nickel). Models added January 2021: CNN EFSNK BN & CNN EFSNK BN TO
Manufacturer:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144

View All Listings by this Company

Print This Approval

#1910907

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating ¼” turn ceramic disk headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910907
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections
Marking:
Cascade on front of body
Installation Requirements:
R001 R006 R010
Model:
014.1120.3
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval

#1910911

Range of single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating ¼” turn ceramic disk headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910911
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections
Marking:
INFINITA (REGISTERED TRADEMARK OF FORTIS) ON BASE OF TAP BODY
Installation Requirements:
R001 R006 R010
Model:
INF-LUV-001
Factor:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval

#1910912

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910912
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
INFINITA (REGISTERED TRADEMARK OF FORTIS) ON BASE OF TAP
Installation Requirements:
R001 R006 R010
Model:
INF-HIE-001
Factor:
FORTIS MERCHANTS LTD
Company Name
FORTIS MERCHANTS LTD
Address
SUSSEX HOUSE QUARRY LANE
Postcode
PO19 8PE

View All Listings by this Company

Print This Approval

#1910330

Range of single hole, single outlet (swivel) combination tap assemblies having brass bodies (in various finishes). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910330
Expiry date:
31/10/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.
Marking:
Phoenix on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
1106-SSBP7 1106-SSCP7 1105-SSBP7 1105-SSCP7 Where – BP is brushed CP is chrome plated
Manufacturer:
Phoenix Success Sanitary Wares Co.,Ltd
Company Name
Phoenix Success Sanitary Wares Co.,Ltd
Address
Building E, Shaen Sanitaryware, Dongxi District Airport Zhishan Town
Country
Heshan

View All Listings by this Company

Print This Approval

#1910064

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910064
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
REGINOX ON FRONT OF TAP BASE
Installation Requirements:
R001 R006 R010
Model:
ALPINE KITCHEN MIXER CP
Factor:
Reginox UK Ltd.
Company Name
Reginox UK Ltd.
Address
Units 1-4 Radnor Park Trading Estate, Back Lane, Congleton
Postcode
CW12 4XJ
Country
Cheshire

View All Listings by this Company

Print This Approval

#1910063

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910063
Expiry date:
31/10/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
INSTINCT ON FRONT OF TAP BODY
Installation Requirements:
R001 R006 R010
Model:
PARAGON KITCHEN MIXER CP
Factor:
Plumbing & Heating Group
Company Name
Plumbing & Heating Group
Address
C/O Tippers Builders Merchants, Europa Way, Lichfield
Postcode
WS14 9TZ

View All Listings by this Company

Print This Approval

#1910335

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (with various finishes) having ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910335
Expiry date:
31/10/2024
Marking:
Clearwater on main body
Installation Requirements:
R001 R006 R010
Model:
ZO2CP Z03CP Z03BN Z04CP Z04BN ZO2BN ZO3CP ZO3BN ZO4CP ZO4BN Where: CP = chrome plated BN = brushed nickel
Manufacturer:
Clearwater Products Ltd
Company Name
Clearwater Products Ltd
Address
Shannon Place Tewkesbury Place
Postcode
GL20 8SL

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 5 of 52

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.