Grohe ‘Get’ Single hole, single outlet (fixed/swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, single lever operating members and pull-out spray (with self-closing trigger assembly). The outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1909349

Expiry date:

30/09/2024

Size:

Stainless steel braided PEX lined hose assembly incorporating 1/2” end connections.

Marking:

Grohe on body

Installation Requirements:

R001 R006 R009 R010

Model:

30.360

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg 58675 Hemer

Country

Germany

Phone

02372 930

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass body) incorporating a ceramic cartridge headwork with single lever operating members. The products incorporate a connection for filtered water supply controlled by quarter turn ceramic disc headwork. The spout outlets incorporate plastic aerator. Maximum working pressure 12.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1909358

Expiry date:

30/09/2024

Size:

Please refer to model.

Marking:

SMR on rear of body

Installation Requirements:

R001 R006 R010

Model:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections: AT3 filter, AT4 filter, HP1 filter, Athos filter. 15mm copper tails: HP2 filter & AT5 filter Model added April 2020 has stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections: Auxerre Filter.

Manufacturer:

San Marco Rubinetteria Srl

Company Name

San Marco Rubinetteria Srl

Address

Via Carducci 10 Pray Biellese (Biella) 13867 Italy

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (in various finishes). Incorporating a quarter turn ceramic cartridge headwork with spring loaded return to the closed position controlling flow of the boiling water outlet and a ceramic cartridge headwork controlling flow from the hot and cold supply with dome type and lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar on the hot and cold supply, 3.0 bar on the boiling water supply. Maximum operating temperature 65°C on the hot and cold supply, 99°C on the boiling water supply.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1909369

Expiry date:

30/09/2024

Note:

Water boiler is not included as part of this approval

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.

Marking:

Cassellie on base of body

Installation Requirements:

R001 R006 R009 R120 R150

Model:

KTA028, KTA029, KTA030, KTA031, KTA032 & KTA051 – with L spout shape KTA027, KTA045, KTA046, KTA047, KTA049 & KTA050 – with C spout shape All available in the following finishes – Chrome Brushed Nickel Gunmetal Grey Brushed Gold Brushed Copper Black Models added December 2019: Models are available with optional Silicone outlet hoses.

Manufacturer:

CASSELLIE LTD

Company Name

CASSELLIE LTD

Address

UNIT 1-6 HOWDEN WAY MORLEY LEEDS

Postcode

LS27 OTF

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (Chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 3.0 bar. Maximum operating temperature 85°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1909903

Expiry date:

30/09/2024

Size:

Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections

Marking:

Bristan on tap body

Installation Requirements:

R001 R006 R010

Model:

9L233901CPBK3T

Factor:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire

Postcode

B78 1SG.

Country

United Kingdom

Phone

0844 7016274

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1905087

Expiry date:

31/05/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.

Marking:

TP on rear of body.

Installation Requirements:

R001 R006 R010

Model:

158714 LANGDALE MONOBLOC SINK MIXER

Factor:

Travis Perkins Plc

Company Name

Travis Perkins Plc

Address

Divisional Office Lakeside House Bedford

Postcode

NN4 7HD

Country

Northhampton

Phone

+44 (0) 1604 503457

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass or brushed gold PVD). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910302

Expiry date:

31/10/2024

Size:

Nylon braided PEX lined hose assembly incorporating ½” captive nut end connections.

Marking:

PPI on rear of main body

Installation Requirements:

R001 R006 R009 R010

Model:

187007 187007 BGP Models added 19/07/2021 187007 SS4

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass, brushed gold PVD or stainless steel finish). Incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber flow straightener. Maximum working pressure 5 bar. Maximum operating temperature 70°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910303

Expiry date:

31/10/2024

Size:

Nylon braided PEX lined hose assembly incorporating ½” captive nut end connections.

Marking:

PPI on rear of main body

Installation Requirements:

R001 R006 R009 R010

Model:

187006 187006 BGP Model added July 2021: 187006 SS4

Manufacturer:

PPI Xiamen Industry Co Ltd

Company Name

PPI Xiamen Industry Co Ltd

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022

Country

China

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies having brass bodies (in various finsihes). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910332

Expiry date:

31/10/2024

Size:

Stainless steel braided PEX lined hose assembly incorporating ½” captive nut end connections.

Marking:

Phoenix on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

1194‐SSBP7, 1194‐SSCP7, 1195‐SSBP7, 1195‐SSCP7, 1183‐SSBP7, 1142‐BRCP7, 1184‐SSBP7 & 1184‐SSCP7 COMBINATION TAP ASSEMBLIES

Manufacturer:

Phoenix Success Sanitary Wares Co.,Ltd

Company Name

Phoenix Success Sanitary Wares Co.,Ltd

Address

Building E, Shaen Sanitaryware, Dongxi District Airport Zhishan Town

Country

Heshan

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910028

Expiry date:

31/10/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Comap on body

Installation Requirements:

R001 R006 R010

Model:

922019 – Comap tempest CP mono sink mixer

Factor:

Comap UK Limited

Company Name

Comap UK Limited

Address

Unit C6 William Way Moss Ind Estate St Helens Road

Postcode

WN7 3PT

Country

Leigh

View All Listings by this Company

Manufacturer:

COMAP (JIANGMEN)

Company Name

COMAP (JIANGMEN)

Address

98 Longxi High Tech Zone Guangdong

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with optional plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910044

Expiry date:

31/10/2024

Size:

Stainless steel braided TPSiV lined flexible hose assemblies with ½” captive nut end connections.

Marking:

Blanco on top of operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

BM9301 Blanco City

Factor:

Blanco Limited

Company Name

Blanco Limited

Address

1 Victor Way, Colney Street, St Albans

Postcode

AL2 2FL

View All Listings by this Company