'SikaTop®-107 Seal AE'. Site applied, grey coloured, two-part coating. Mix parts A and B in a 1.4 weight ratio and apply as per manufacturer's Method Statement 'V1', dated 'Feb 2025'. Cure Coat 1 for 3 hours at 30°C. Cure Coat 2 for 21 days at 30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5038 Coatings, Paints & Linings

Section Subtitle:

Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250155062

Expiry date:

31/01/2030

Approval Holder:

Sika UAE L.L.C

Company Name

Sika UAE L.L.C

Address

P O Box 126212, Saih Shuaib 4 (533), Dubai Industrial City (DIC), Plot 61 (533-279), Dubai

Country

United Arab Emirates

Phone

+971 4 439 8200

General Email

sika.uae@ae.sika.com

View All Listings by this Company

'NATCEM AC'. Site applied, grey coloured cement mortar. Mix 'NATCEM AC' and water in a weight ratio of 5:1 and apply as per manufacturer's Instructions for Use 'Issue 4', dated '16 September 2024'. Cure for 4 hours@0°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5063 Concrete, Cement and Mortar

Section Subtitle:

Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.

WRAS Approval Number:

250155059

Expiry date:

31/01/2030

Approval Holder:

Natural Cement Distribution Ltd.

Company Name

Natural Cement Distribution Ltd.

Address

10-11 Fountain Parade, Mapplewell, Barnsley

Postcode

S75 6FW

View All Listings by this Company

'Hansung M&S GRP Panel'. Light grey coloured, hot press moulded GRP panel. For use with water up to 60°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

250255018

Expiry date:

28/02/2030

Approval Holder:

Hansung M&S Co. Ltd.

Company Name

Hansung M&S Co. Ltd.

Address

47, Mieumgukje 4-ro, Gangseo-gu, Busan

Country

Republic of Korea

View All Listings by this Company

'UNISILKON TK 002/1000'. Clear lubricant, to be applied as per manufacturer's instructions. For use with water up to 65°C.

Section:

5160 Lubricants

Expiry date:

31/01/2030

Approval Holder:

Klüber Lubrication München GmbH & Co. KG

Company Name

Klüber Lubrication München GmbH & Co. KG

Address

Geisenhausenerstrasse 7, 81379 München

Country

Germany

View All Listings by this Company

'MS Schramberg Sintered Barium Ferrite (10-1176001)'. Dark grey coloured Sintered Barium Ferrite ring component. For use with water up to 85°C.

Section:

5165 Magnetic Material

Expiry date:

31/01/2030

Approval Holder:

MS Schramberg GmbH & Co. KG

Company Name

MS Schramberg GmbH & Co. KG

Address

Max-Planck-Str. 15, 78713 Schramberg

Country

Germany

View All Listings by this Company

'MS Schramberg Sintered Strontium Ferrite (10-1173001)'. Grey coloured Sintered Strontium Ferrite ring component. For use with water up to 85°C.

Section:

5165 Magnetic Material

Expiry date:

28/02/2030

Approval Holder:

MS Schramberg GmbH & Co. KG

Company Name

MS Schramberg GmbH & Co. KG

Address

Max-Planck-Str. 15, 78713 Schramberg

Country

Germany

View All Listings by this Company

'ULTRAMID® T7300EG10 FC Aqua BK23285'. Black coloured, injection moulded PA66 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250155050

Expiry date:

31/01/2030

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'PLUSTEK PAT302PWG50BK10'. Black coloured, injection moulded, glass-fibre reinforced polyamide material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240855051

Expiry date:

31/08/2029

Approval Holder:

Polyram Plastic Industries Ltd.

Company Name

Polyram Plastic Industries Ltd.

Address

Ram-On 19205, 1920500

Country

Israel

View All Listings by this Company

'Polimal 122-2 AWTP' (beige coloured) & 'Polimal 1094 AWTP-1' (amber coloured). Contact moulded, unsaturated polyester resin materials. For use with water up to 23°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250155049

Expiry date:

31/01/2030

Approval Holder:

Sarzyna Chemical Sp. z o.o.

Company Name

Sarzyna Chemical Sp. z o.o.

Address

UI. Chemikow 1, Nowa Sarzyna, 37-310

Country

Poland

View All Listings by this Company

'Sirester EC 0995/AT'. Pale orange coloured, unsaturated polyester resin material manufactured by filament winding. For use with water up to 23°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250255019

Expiry date:

28/02/2030

Approval Holder:

S.I.R. Industriale s.p.a.

Company Name

S.I.R. Industriale s.p.a.

Address

Via Vincenzo Bellini, 35, 20846 Macherio (MB)

Country

Italy

View All Listings by this Company