Range of single hole, single outlet fixed combination tap assemblies (brass bodies - various finishes) incorporating quarter turn ceramic disc headworks with dome type operating members. The temperature is controlled via a thermostatic mixing cartridge with a dome type operating member. The spout outlet incorporates an aerator. The inlet hoses each incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

241002050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2029

Model:

12 010 xxx Axor Starck Organic 2-handle basin mixer 80 with pop-up waste set 12 011 xxx Axor Starck Organic 2-handle basin mixer 80 without pull-rod 12 012 xxx Axor Starck Organic 2-handle basin mixer 170 without pull-rod for wash bowls 12 013 xxx Axor Starck Organic 2-handle basin mixer 240 without pull-rod for wash bowls 12 014 xxx Axor Starck Organic 2-handle basin mixer 50 with pop-up waste set for hand wash basins available in -000 (Chrome) and customized finishes: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies with (brass bodies - various finishes), incorporating ceramic cartridge headworks and dome type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure; 5 Bar Maximum operating temperature 65°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

241002065

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Lanbiao on operating member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2029

Model:

F9702 F9702L F9702M No. surface treatment code 1 Black-H 2 Matte white-DYB 3 Perl white painted-BZ 4 Red bronze-HGTS 5 yellow bronze brushed-HTL 6 Bronze -Q 7 Bronze brushed bright-QTSL 8 Bronze brushed matte-QTS 9 Acid copper brushed-STS 10 Water plated rose gold-SDMGJ 11 Nickel brushed bright light-N 12 Nickel brushed -NP 13 Titanium gold-TJ 14 Titanium gold brushed-TJLS 15 Gold-G 16 Gold brushed-GJS 17 Zirconium gold wire drawing matte-GJSY 18 Zirconium gold wire drawing matte bright light-PGJFY 19 Brushed gold -PLSJ 20 Brushed gold matte-LSJY 21 Rose gold-MGJ 22 Rose gold brushed-MGJL 23 Light rose gold brushed-DMGJ 24 Red bronze brushed-HTS 25 Grey-QHP 26 Grey brushed-LSQH 27 Brushed yellow rose gold-LHMGJ

Approval Holder:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

General Email

984458082@qq.com

View All Listings by this Company

Range of floor mounted single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

241002053

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Product to be installed in combination with 10452180 Basic set ½” BSP (F)

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R010 R030

Expiry date:

31/10/2029

Model:

72 412 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

View All Listings by this Company

Range of floor standing, single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

241004004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

F9905, F9906, Lanbiao etched on operating member. F9908 Lanbiao etched on floor plate.

Installation Requirements:

R001 R010 R030

Expiry date:

31/10/2029

Model:

F9905-** F9906-** F9908-** F9905-** F9906-** F9908-** **Represents the following different surface treatments on body: 1. H‐Black 2. N‐ Nickel Brushed 3. GJS‐ Zirconium gold brushed 4. G‐ Zirconium gold 5. QTSL‐ Brushed bronze bright 6. QTS‐Brushed Bronze Matte 7. TJ‐ Titanium 8. TJLS‐ Titanium brushed 9. MGJ‐ Rose gold 10. MGJL‐ Rose gold brushed 11. HGT‐ Red bronze 12. HTL‐ Brushed brass 13. HTS‐ Brushed copper 14. PVDQH‐Gun Ash 15. HQ‐Gun Ash Brushed 16. Q‐Bronze 17. DYB‐Electrophoresis Matt White 18. STS‐Acid copper brushed 19. BZ‐Spray pearl white 20. B‐Spray matt white

Manufacturer:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chrome plated brass), incorporating quarter turn ceramic disk headwork’s with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2105919

Size:

15mm copper tails

Marking:

‘Saracen’ logo (brand of Wolseley) on operating member

Installation Requirements:

R001 R006 R010

Expiry date:

31/05/2026

Model:

C02068

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company