Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250102055

Range of in-line single jet water meters with brass bodies. Products incorporate plastic strainers. Maximum working pressure: 16.0 Bar. Maximum operating temperature: 85.0°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN15 Models: 1/2” BSP (M) DN20 Model: 3/4” BSP (M).
Marking:: Flow arrow on body. BMETERS, serial number and other technical info on meter face.
Installation Requirements:: R001
Expiry date:: 31/01/2030
Model:: HYDRODIGIT-S1 DN15 Length: 80mm, 110mm, 145mm, 165mm. DN20 Length: 130mm, 190mm.

Product Images

Manufacturer:: B Meters S.r.l

Company Name
B Meters S.r.l
Address
Via Friuli 3 33050 Gonars (UD) Italy

View All Listings by this Company

WRAS Approval Number: #250115011

Range of ultrasonic water meters with brass bodies. The products incorporate a motorised butterfly valve on the outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1505 Water Meters
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¾” BSP (M)X(M) (DN15), 1” BSP (M)X(M) (DN20) and 1¼”BSP (M)X(M) (DN25).
Marking:: Huizhong Instrumentation Co., Ltd logo, Huizhong Instrumentation Co., Ltd, model (SCL-61HF-100), DN, manufacturing date (YYYYMM) and other technical information on meter face.
Installation Requirements:: R001
Expiry date:: 31/01/2030
Model:: SCL-61HF-100.

Product Images

Approval Holder:: Huizhong Instrumentation Co., Ltd.

Company Name
Huizhong Instrumentation Co., Ltd.
Address
No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province
Country
China

View All Listings by this Company
Manufacturer:: Huizhong Instrumentation Co., Ltd.

Company Name
Huizhong Instrumentation Co., Ltd.
Address
No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province
Country
China

View All Listings by this Company

WRAS Approval Number: #241102058

Range of water meter manifolds incorporated into a meter chamber. The inlet of all models incorporates an isolation valve and an approved check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection. MK7000003003 is for use with MDPE plastic pipe (manufactured to BS EN 12202-1:2011). Maximum working pressure 12.5 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Waterfit logo on inside of meter casing. Flow arrow on body.
Installation Requirements:: R001 R008
Expiry date:: 30/11/2029
Model:: MK7000003054 Meterfit Carrier: 25mm MDPE Tails. MK7000003003 Meterfit Carrier: 25mm compression. MK7000003244 Meterfit Carrier: ¾” BSP (F).

Product Images

Approval Holder:: Waterfit Ltd

Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Country
West Midlands
Phone
0121 5207987
General Email
enquiries@waterfit.co.uk

View All Listings by this Company

WRAS Approval Number: #250202006

Water meter manifold with a gunmetal body. The product incorporates a non-return valve (not suitable for backflow protection) and a spherical valve on the inlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1" BSP (F) x 1” BSP (F).
Marking:: WATERFIT, Waterfit logo, flow arrow and size on body. CR on crutch head and cap.
Installation Requirements:: R001
Expiry date:: 28/02/2030
Model:: SACAXX004038

Manufacturer:: Waterfit Ltd

Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Country
West Midlands
Phone
0121 5207987

View All Listings by this Company

WRAS Approval Number: #250104714

Mixing valve incorporating a brass body and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure10.0 bar. Maximum operating temperature 65°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F) captive nut
Marking:: Presto on body
Installation Requirements:: R001 R008 R010
Expiry date:: 31/01/2030
Model:: 29424 MIXER G1/2

Product Images

Manufacturer:: Les Robinets Presto S.A

Company Name
Les Robinets Presto S.A
Address
4 Rue Lavoiser St. Georges De Didonne
Postcode
17110
Country
France
Phone
+33 546 053 452

View All Listings by this Company

WRAS Approval Number: #241002707

Range of pumps with plastic bodies, pistons and TPE diaphragm. For use with John Guest LLDPE pipe. The products incorporate non-return valves (not suitable for backflow protection). Maximum working pressure: 8.27 Bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002707
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 5/16” push fitting.
Marking:: LEFOO, model number, production batch# and related technical parameters on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: LFP-ABC-D. Model code description:LFP-ABC-D LF means LEFOO, P means Pump A means voltage,0=12V,1=24V,2=36V,5=115V,6=230V B means flow rate,=050,075,100,150,200,300,400,500,600,800,1000 C means function,=W means stabilized;=S means self-priming) D means motor type;=A, B, P or Blank； A - Downgrade Brush motor, B - Brushless motor, Blank - Brush motor, P - Upgraded brush motor

Product Images

Manufacturer:: Lefoo Industrial Co., Ltd.

Company Name
Lefoo Industrial Co., Ltd.
Address
NO.118 Changda Road, Linping Street, Linping District, Hangzhou City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #241002722

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: P 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. P 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. P 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. P 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Foras (Brand of Pentax), model code and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: P range: P X(S) - XX/Y (T) Where: P = pump model X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. P 3S models: P 3S-50/2; P 3S-70/3; P 3S-90/4; P 3S-100/5; P 3S-120/6; P 3S-150/7. P 5S models: P 5S-70/2; P 5S-80/3; P 5S-120/4; P 5S-150/5; P 5S-180/6; P 5S-200/7. P 7S models: P 7S-100/2; P 7S-120/3; P 7S-180/4; P 7S-250/5; P 7S-300/6. P 9S models: P 9S-100/2; P 9S-150/3; P 9S-200/4; P 9S-250/5. P 3S models: P 3S-50/2 T; P 3S-70/3 T; P 3S-90/4 T; P 3S-100/5 T; P 3S-120/6 T; P 3S-150/7 T. P 5S models: P 5S-70/2 T; P 5S-80/3 T; P 5S-120/4 T; P 5S-150/5 T; P 5S-180/6 T; P 5S-200/7 T. P 7S models: P 7S-100/2 T; P 7S-120/3 T; P 7S-180/4 T; P 7S-250/5 T; P 7S-300/6 T; P 7S-350/7 T. P 9S models: P 9S-100/2 T; P 9S-150/3 T; P 9S-200/4 T; P 9S-250/5 T. P 18S models: P 18S-180/2 T; P 18S-250/3 T; P 18S-400/4 T.

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #250702701

Range of cold-water supply booster sets, incorporating a stainless-steel manifold system and between 1 and 3 pumps. The booster sets also incorporate spherical valves, non-return valves (not suitable for backflow protection), pressure switches/sensors and expansion vessels. Maximum working pressure: 16.0 Bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Inlet: 1” BSP, 1 ¼” BSP, 1 ½” BSP, 2” BSP, 2 ½” BSP, 3” BSP & DN100 (flanged). Outlet: 1” BSP, 1 ¼” BSP, 1 ½” BSP, 2” BSP, 2 ½” BSP, 3” BSP, DN80 (flanged) & DN100 (flanged).
Marking:: LOWARA, Model name and product information on adhesive label on control panel
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Model:: SMB / VV / YYYYYYYYYYYY / W / XX / ZZZ SMB - Series of booster - Variable speed Drive SM VV- Number of pumps installed: 10=1 PUMP 20=2 PUMPS 30=3 PUMPS YYYYYYYYYYY -Type of pumps installed: from 1SVE up to 22SVE from 1HME up to 15HME W - Main voltage supply 4=3*400Vac 2=1*230Vac 3=3*230Vac XX - Option CP=free voltage contacts ZZZ - Option PMA=pressure switch on suction

Manufacturer:: Xylem Service Italia S.r.l

Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company

WRAS Approval Number: #250102716

Range of booster pumps with stainless steel bodies, impellers and non-return valves (not suitable for backflow protection) at the inlets. From June 2025 the pumps are available with plastic or stainless steel impellers. Maximum working pressure 6.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250102716
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (M).
Marking:: Pedrollo Spa logo on front panel. Model and product information on adhesive label.
Installation Requirements:: R001 R008 R415
Expiry date:: 31/01/2030
Model:: DG-BLU 3, DG PED 3 EVO, DG-BLU 5, DG PED 5 EVO, DUAL DG-BLU 3+3, DUAL DG PED EVO 3+3, DUAL DG-BLU 3+5, DUAL DG PED EVO 3+5, DUAL DG-BLU 5+5, DUAL DG PED EVO 5+5.

Product Images

Manufacturer:: Pedrollo S.p.A.

Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Country
Italy
Phone
+39 045 6136311

View All Listings by this Company

WRAS Approval Number: #250102024

Concealed, ceiling mounted installation sets and shower outlets. The inlets incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250102024
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The ceiling mounted installation sets are not approved in their own right. Open outlet use only.
Size:: ½” BSP (F)
Marking:: Dornbracht on shower face.
Installation Requirements:: R001 R040
Expiry date:: 31/01/2030
Model:: Concealed ceiling mounted installation sets: 3577097090, 3577197090, 3578097090, 3578197090. Which must be installed in conjunction with the following shower outlets: 2 inlets/2 spray modes: 41770979, 41771979, 41772979, 41773979. 5 inlets/5 spray modes: 41780979, 41781979.

Product Images

Approval Holder:: Dornbracht GmbH & Co. KG.

Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company