Directory Search Results

Print List

#2301073

Range of floor mounted, swivel, bath mixers (brass or stainless-steel bodies - variety of finishes (see models), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products also incorporate self-cancelling diverters to a shower handset. The diverter outlets incorporate an approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2301073
Size:
½” BSP female.
Marking:
VOLA on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2028
Model:
VOLA FS1-XX Brass VOLA FS1-XX Stainless Steel Model VOLA FS1-XX Brass and Stainless Steel are available with different surface finishes. Suffix “XX” indicate the number of surface finish and denotes: For Brass: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, 62 = Deep Black, 63 = Copper, 65 = Gold, 68 = Nickel. For Stainless Steel: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold.
Product Images

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2211058

Range of single hole, two single outlets (swivel) combination tap assemblies (brass bodies - various finishes). Incorporating ceramic cartridge headwork, single lever operating member controlling both flow and temperature to the spout and spring-loaded pull-down hose. The pull-down hose incorporates a hand spray with a self-closing trigger mechanism. The spout incorporates a ceramic disc headwork controlling the flow with a single lever operating member. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2211058
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" B captive nut.
Marking:
Cooke & Lewis &date of manufacture MM/YYYY on body
Installation Requirements:
R001 R009 R010 R006
Expiry date:
30/11/2027
Model:
3663602930075 Chrome 3663602930082 Nickle Brushed 3663602930099 Black Paint
Product Images

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2209069

Range of combined bath filler and overflow waste assemblies incorporating a cable operated pop-up waste. The outlet incorporates a plastic flow straightener. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2209069
Note:
No testing performed on pop-up waste. Open outlet use only.
Size:
Stainless steel braided EPDM lined flexible hose assembly with ½” captive nut end connection.
Marking:
NK Porcelanosa on overflow cover.
Installation Requirements:
R001 R576
Expiry date:
30/09/2027
Model:
250023892-N790001469 length 55 cm – Chrome finishing

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2301049

Range of wall mounted brass bodied spout outlets (various finishes, see model) incorporating a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
2301049
Size:
¾” BSP (M)
Marking:
AXOR on face plate
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
38 411 xxx 45 410 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2212087

Range of longitudinal (EFW) welded stainless steel (Grade 304/304L & 316/316L) pipes. Maximum working pressures: 1¼” sch 10: below ground = 55.0 bar. Above ground = 74.0 bar. 1½” sch 10: below ground = 48.0 bar. Above ground = 64.0 bar. 2” sch 10: below ground = 38.5 bar. Above ground = 51.0 bar. 2½” sch 10: below ground = 34.5 bar. Above ground = 46.0 bar. 3” sch 10: below ground = 28.0 bar. Above ground = 38.0 bar. 4” sch 10: below ground = 22.0 bar. Above ground = 29.0 bar. 5” sch 10: below ground = 19.5 bar. Above ground = 26.0 bar. 6” sch 10: below ground = 16.0 bar. Above ground = 22.0 bar. 8” sch 10: below ground = 14.0 bar. Above ground = 18.0 bar. ½” sch 40 & ¾” sch 40: below ground = 60.0 bar. Above ground = 80.0 bar. 1” sch 40: below ground = 30.0 bar. Above ground = 40.0 bar. 1¼” sch 40 & 1½” sch 40: below ground = 60.0 bar. Above ground = 80.0 bar. 2” sch 40: below ground = 54.5 bar. Above ground = 72.0 bar. 2½” sch 40: below ground = 60.0 bar. Above ground = 80.0 bar. 3” sch 40: below ground = 52.0 bar. Above ground = 69.0 bar. 4” sch 40: below ground = 44 bar. Above ground = 58.0 bar 5” sch 40: below ground = 38.5 bar. Above ground = 51.0 bar. 6” sch 40: below ground = 35.0 bar. Above ground = 46.0 bar. 8” sch 40: below ground = 31.0 bar. Above ground = 41.0 bar. Maximum operating temperature 100°C.

Section:
0870 Tubes
Section Subtitle:
Stainless Steel.
WRAS Approval Number:
2212087
Note:
Not tested in conjunction with any fittings.
Size:
sch 10 pipes: 1¼” OD up to 8” OD. sch 40 pipes: ½” OD up to 8” OD.
Marking:
ARMETAL and technical information, including steel grade (TPXXX/XXXL, where XXX is 304 or 316), and batch code (including date of manufacture (B#8xxxxWWYY or B#2xxxxWWYY) printed on body.
Installation Requirements:
R001
Expiry date:
31/12/2027
Proviso:
Not tested in conjunction with any fittings.
Model:
Armetal ‘ASP’ range of stainless steel pipes (Grade 304/304L & 316/316L) - sch 10 & sch 40 pipes.
Product Images

Approval Holder:
Armetal Stainless Pipe Co.Ltd. (ASP).
Company Name
Armetal Stainless Pipe Co.Ltd. (ASP).
Address
3674-Al Madinah As Sinaiyah Al Jadidah, Unit No.3, Riyadh 14334-8376
Country
Saudi Arabia
Phone
+966 11265 2030

View All Listings by this Company
Manufacturer:
Armetal Stainless Pipe Co.Ltd. (ASP).
Company Name
Armetal Stainless Pipe Co.Ltd. (ASP).
Address
3674-Al Madinah As Sinaiyah Al Jadidah, Unit No.3, Riyadh 14334-8376
Country
Saudi Arabia
Phone
+966 11265 2030

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 965 of 2278

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.