Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2309056

Range of wall mounted, single-hole, single outlet (fixed) electronically controlled combination tap assemblies (chrome plated brass or stainless-steel bodies) which are supplied with pre-mixed water. Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate plastic aerators. Maximum working pressure 8.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0684 Combination Tap Assemblies
Section Subtitle:: Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:: 2309056
Size:: 10mm spigot connection
Marking:: Stern on body
Installation Requirements:: R001 R040
Expiry date:: 30/09/2028
Model:: 350207 Tubular Perth B 350107 Tubular Perth E 350209 Tubular DPB 350103 Tubular DPE 350214 Tubular DP LB 350123 Tubular DP LE 350224 Tubular XL DPB 350223 Tubular XL DPE 350218 Tubular DPB AISI316 350128 Tubular DPE AISI316 350217 Tubular DP LB AISI316 350126 Tubular DP LE AISI316

Approval Holder:: Y. Stern Engineering (1989) Ltd

Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

WRAS Approval Number: #2310034

Range of wall mounted, electronically controlled combination tap assemblies, (chrome plated brass or stainless steel bodies). The flow is controlled by a solenoid valve that is activated via an infra-red sensor The spout outlet incorporates a plastic aerator. The product incorporates a stainless steel braided PEX lined flexible connection hose assembly, connecting the spout to the solenoid valve. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0684 Combination Tap Assemblies
Section Subtitle:: Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:: 2310034
Size:: 1/2" BSP (M) X 10mm spigot solenoid valve
Marking:: Stern on body.
Installation Requirements:: R001 R009 R040
Expiry date:: 31/10/2028
Model:: 352000 D28 352100 D28E 352010 D28 LB 352110 D28 LE 352130 D28 AISI316 352120 D28E AISI316 352015 D28 LB AISI316 352125 D28 LE AISI316

Approval Holder:: Y. Stern Engineering (1989) Ltd

Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

WRAS Approval Number: #2212356

Side entry BS1212-4 fill valves with plastic bodies. Maximum working pressure 10.0 bar. Coldwater use only.

Section:: 2075 Float Operated Inlet Valve
Section Subtitle:: Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:: 2212356
Note:: IRN R560 applies to bottom entry valves only
Size:: ½” BSP (M)
Marking:: Wirquin, Date and level on body. BS1212-4 & WRAS, on float.
Installation Requirements:: R001 R550 R560
Expiry date:: 31/12/2027
Model:: Side entry, brass inlet: B24018 NABIS

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2212357

Range of bottom entry BS1212-4 telescopic fill valves with plastic bodies. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2075 Float Operated Inlet Valve
Section Subtitle:: Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:: 2212357
Size:: ½” BSP (M)
Marking:: Wirquin, Date and level on body. BS1212-4 & WRAS, on float.
Installation Requirements:: R001 R550 R560
Expiry date:: 31/12/2027
Model:: Bottom entry, brass inlet: B24019 NABIS BOTTOM ENTRY BRASS TELESCOPIC AG BS 1212-4 INLET VALVES.

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2311336

Range of tundishes incorporating a plastic or coated, mild steel body. Maximum operating temperature 85°C.

Section:: 0046 Backflow Prevention Devices
Section Subtitle:: Tundish(s) air break to drain.
WRAS Approval Number:: 2311336
Size:: See model
Marking:: Altecnic and product info on body. Some models are also marked with the date of manufacture. The code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019.
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: 128-2001 CST 1F x 1 ¼”F Straight Tundish. 128-2003 CST 1 ½”F x 2”F Straight Tundish. 128-2004 CST 2”F x 2 ½”F Straight Tundish. 128-2005 CST 2 ½”F x 3”F Straight Tundish. 128-4001 CST 15mm x 22mm Straight Tundish. 128-4002 CST 15mm x 22mm Straight Tundish. 128-4003 CST 15mm x 22mm Straight Tundish. 128-4004 CST 22mm x 28mm Straight Tundish. AL-400010 15mm x 22mm Straight Tundish. AP-400010 15mm x 22mm Straight Tundish. AP-400012 15mm x 22mm Straight Tundish. G-128-2201 CST ½” M x ¾” M Angled Tundish. G-128-2010 CST 15mm x 22mm Straight Dry Trap Tundish. Model added May 2024: AP-400011 22mm x 28mm Straight Tundish. Model added September 2024: 128-2002CST 1 ¼” BSP(F) x 1 ½”BSP(F).

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2312800

Range of aerator kits incorporating plastic flow regulators (1.9l/min, 3.5l/min & 5.0l/min) with plastic bodies and EPDM ‘O’ rings. Plastic adaptors, NBR washers and chromium plated brass housings may also be supplied as part of the kit. Maximum operating temperature 65°C.

Section:: 0435 Taps and shower valves - Components
Section Subtitle:: Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:: 2312800
Note:: Flow rates declared by manufacturer are not endorsed by WRAS.
Size:: JR – 13/16-27, ¾-27, STD – M22, M24.
Marking:: Neoperl on body.
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: 40.3856.000 40.3858.000 42.2013.000 42.2015.000 A5.9035.100 A5.9042.100 42.3856.000 42.3858.000 The following components may be supplied as part of the kit: 55.1211.100 Rubber washer 16,0x20,8x1,5, 55.1223.100 Rubber washer 15,0x21,3x2,8, 53.1239.1 Adapterring JR/STD, 53.1243.1 ADAPTERRING JR/STD-ROMPIG, 33.0511.0 Adapter m M24x1 – m M22x1, 01.9004.0 MUNDSTUECK M22x1 OF5, 01.9014.0 MUNDSTCK M24x1 OF5 0 SCH.

Approval Holder:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

WRAS Approval Number: #2401706

Range of ceramic cartridge headworks with plastic bodies & silicone rubber seals. For insertion into specifically dimensioned bores. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:: 0440 Headworks
Section Subtitle:: Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:: 2401706
Size:: 35mm diameter
Marking:: Hansgrohe & M35 on body.
Installation Requirements:: R001
Expiry date:: 31/01/2029
Model:: 30 129 900 – M35R, 30 129 902 – M 35R, 30 129 910 – M35R EcoR 30 129 920 – M35L. 30 129 921 – M35LA 30 129 922 – M35L 30 179 610 – M35 EcoR WT

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #2311320

Thermostatic cartridges with plastic or brass bodies, and EPDM ‘O’ rings and stainless steel strainers. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. BS6920 85°C.

Section:: 0442 Thermostatic cartridges
Section Subtitle:: Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:: 2311320
Size:: see model
Marking:: Qilo printed on body.
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: Plastic bodies: 814116: 32.64mm OD, 814125: 26.84mm OD. Brass bodies: 814126: 25.71mm OD, 814122: 32.29mm OD.

Approval Holder:: Zhejiang Qilong Sanitary Ware Co., Ltd

Company Name
Zhejiang Qilong Sanitary Ware Co., Ltd
Address
The Intersection of Yufu Road and Weiwu Road, Fengjiang Street, Luqiao District, Taizhou City, Zhejiang Province
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Qilong Sanitary Ware Co., Ltd

Company Name
Zhejiang Qilong Sanitary Ware Co., Ltd
Address
The Intersection of Yufu Road and Weiwu Road, Fengjiang Street, Luqiao District, Taizhou City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2311331

‘VT30’ range of thermostatic cartridges with a plastic body and EPDM ‘O’-rings and stainless steel strainers. For insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. BS6920 70°C.

Section:: 0442 Thermostatic cartridges
Section Subtitle:: Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:: 2311331
Size:: 32.60mm OD
Marking:: Vernet France and batch no. on body
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: VT30-001, VT30-004, VT30-005, VT30-006, VT30-007, VT30-012, VT30-013, VT30-014, VT30-016, VT30-017, VT30-021, VT30-023, VT30-036, VT30-037, VT30-043, VT30-002, VT30-011, VT30-024, VT30-026, VT30-008, VT30-010, VT30-035.

Approval Holder:: VERNET GROUP

Company Name
VERNET GROUP
Address
21-27 route d’Arpajon Ollainville – BP31 ARPAJON
Postcode
91291
Country
France
General Email
roze@vernet.fr

View All Listings by this Company
Manufacturer:: VERNET GROUP

Company Name
VERNET GROUP
Address
21-27 route d’Arpajon Ollainville – BP31 ARPAJON
Postcode
91291
Country
France
General Email
roze@vernet.fr

View All Listings by this Company

WRAS Approval Number: #2310370

Range of wall mounted, single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 2310370
Note:: This product is to be installed with concealed rough set 59916000075.
Size:: ½” BSP (F)
Marking:: Keuco on back plate
Installation Requirements:: R001 R010 R040
Expiry date:: 31/10/2028
Model:: 59516xxy1zz – IXMO Pure 51516xxy1zz – Edition 400 59916000075 – concealed rough set Model: 51116xxy3zz - Edition 11 added March 2024 Where ‘xx’ denotes finish, and is replaced with: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, 07 - stainless steel, 12 - polished black chrome, 13 - brushed black chrome 17 - aluminium finish. 37 - Black Matt Where ‘Y’ denotes spout projection, and is replaced with: 0 - 165mm 1 - 197mm 2 – 243mm Where “ZZ” denotes rosette and is replaced with: 01 - Round rosette 02 - Square rosette

Approval Holder:: KEUCO GmbH & Co. KG

Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:: KEUCO GmbH & Co. KG

Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company