Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2211708

Size:

see model

Marking:

South Coast Sales Logo, WRAS and date of manufacture YYYY on crimp connection.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

½“ compression x ½" (F) BSP captive nut: EMBW130, length 30cm EMBW150, length 50cm - DN8 ¾“ compression x ¾" (F) BSP captive nut: EMBW530, length 30cm EMBW550, length 50cm - DN13

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602069

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

SHS on end connections.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

V165W-XX 1/2" Female Connection D17, V940W-XX 1/2" Female Connection D17, V941W-XX 1/2" Female Connection D17, V942W-XX 1/2" Female Connection D17. FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of stainless-steel expansion joints with flanged or threaded end connections. For maximum working pressure please refer to model. Maximum operating temperature 100°C.

Section:

1870 Tubes

Section Subtitle:

Flexible - Metal.

WRAS Approval Number:

240704052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Model number

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Threaded connections: Maximum working pressure 16.0 bar: JP20BS, JP20HS, JP250BS, JP250HS: ½", ¾”, 1”, 1¼”, 1½”, 2”, 2½” & 3” BSP (M). Flanged connections: Maximum working pressure 16.0 bar: JP251FS & JP251VS:15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm & 100mm. Maximum working pressure 14.0 bar. JP251FS & JP251VS:125mm. Maximum working pressure 8.0 bar: JP251FS & JP251VS: 200mm. Maximum working pressure 10.0 bar JP251FS & JP251VS: 150mm.

Approval Holder:

Stourflex Ltd

Company Name

Stourflex Ltd

Address

Junction Road Audnam Stourbridge

Postcode

DY8 4YH

Country

United Kingdom

Phone

+441384 393 329

General Email

james.croydon@stourflex.co.uk

View All Listings by this Company

Range of Ultraflow Air bubble top indirect and direct single coil unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 10.0 bar@90˚C. A safety kit (manifold) consisting of a single check valve assembly, verified by test (suitable for backflow prevention against fluid category 2), strainer, an expansion relief valve set at 8.0 bar and a pressure reducing valve set at 3.0 bar and a tundish is also provided. Alternative inlet control group and temperature and pressure relief valve added January 2023. Maximum working pressure: Secondary circuit: 7.5 bar. Primary circuit: 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1890 Unvented Heating Apparatus

Size:

Secondary circuit: 22mm compression. Primary circuit: 22mm compression. Return circuit: 22mm compression.

Marking:

Ultraflow Air on label on front of body.

Installation Requirements:

R001 R140 R360

Expiry date:

31/01/2027

Model:

UOD120 – ULTRAFLOW AIR 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOD150 – ULTRAFLOW AIR 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD170 – ULTRAFLOW AIR 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOD200 – ULTRAFLOW AIR 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD250 – ULTRAFLOWAIR 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD300 – ULTRAFLOW AIR 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI120 – ULTRAFLOW AIR 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI150 – ULTRAFLOW AIR 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI170 – ULTRAFLOW AIR 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI200 – ULTRAFLOW AIR 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI250 – ULTRAFLOW AIR 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI300 - ULTRAFLOW AIR 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS120-ULTRAFLOW AIR SLIM 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS150-ULTRAFLOW AIR SLIM 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS170-ULTRAFLOW AIR SLIM 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS200-ULTRAFLOW AIR SLIM 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOIS120-ULTRAFLOW AIR SLIM 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS150-ULTRAFLOW AIR SLIM 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS170-ULTRAFLOW AIR SLIM 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS200-ULTRAFLOW AIR SLIM 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:

L & M (HEATING) SUPPLIES LTD.

Company Name

L & M (HEATING) SUPPLIES LTD.

Address

103 LOCKFIELD AVENUE ENFIELD, ENFIELD, MIDDLESEX

Postcode

EN3 7PY

View All Listings by this Company

Range of wall mounted shower sets comprising of a concealed, shower valve (brass body – various finishes), overhead shower outlet, shower handset, shower hose and wall elbow. The inlets of both the overhead shower outlet and shower handset incorporate a plastic flow regulator. The flow is controlled to separate shower outlets via a manual diverter. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240702033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP F

Marking:

Haiba Logo on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2029

Model:

HB8123689CS-FK551-XX. HB8123689BP-FK551-XX. HB8123689GS-FK551-XX. ‘XX’ indicates the finish and is replaced with: CS: Trivalent Chromium, BP: Matte Black & GS: Brushed-Gold

Approval Holder:

Ruian Haiba Sanitary Co Ltd

Company Name

Ruian Haiba Sanitary Co Ltd

Address

Luofeng industrial City, Tangxia District Ruian 325024 China

View All Listings by this Company