Range of screw down stop valves with plastic bodies to be used with PEX, MDPE and copper pipe. For above ground use only. Maximum working pressure 16.0 bar, cold water use only.

Section:

2320 Valves

Section Subtitle:

Stop, plastic, screw down.

WRAS Approval Number:

2012071

Note:

To be used with PE pipes manufactured to EN 12201, Copper pipe to BS EN 1057 or PEX pipes to BS7291.

Size:

See Model

Marking:

John Guest Logo and flow arrow on body. John Guest, size and PN on collet.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Stop Valves for use with PE Pipes: UGSTV2020 - 20mm pushfit x 20mm pushfit Stop Cock UGSTV2525 - 25mm pushfit x 25mm pushfit Stop Cock UGSTV3232 - 32mm pushfit x 32mm pushfit Stop Cock Stop Valves for use with PE x Copper or PEX Pipes: UGSTV2515 - 25mm pushfit x 15mm pushfit Stop Cock UGSTV2522 - 25mm pushfit x 22mm pushfit Stop Cock

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Front loading, commercial washing machine. Flow is supplied via solenoid valves and the unit incorporates a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2012326

Size:

Stainless steel braided EPDM lined flexible hose assembly with ¾” captive nut end connectors.

Marking:

Schulthess logo, Schulthess and Professional Swiss made on front of machine. Schulthess, model, address and technical information on rear of unit.

Installation Requirements:

R001 R160 R574

Expiry date:

31/12/2025

Model:

proLine W65– 7 Kg capacity – product code 4201.1 proLine W80 – 9 Kg capacity – product code 4202.1 proLine W100 – 11 Kg capacity – product code 4203.1 Models added September 2021: proLine W130 – 14 Kg capacity – product code 4204.1 proLine W160 – 18 Kg capacity – product code 4205.1 Variant codes can be applied after the product code and consist of the following: B – pre paid card system B1 – expert plus control H – elevated plinth with lint filter I – USB interface K – elevated plinth L – chrome steel housing N – powerline lock set P – drain pump (not applicable to W130 or W160 models) U – anthracite colour way V – drain valve Y – possibility to attach to external detergents

Product Images

Approval Holder:

Schulthess Maschinen AG

Company Name

Schulthess Maschinen AG

Address

Landstrasse 37 Wolfhaussen Switzerland

Postcode

CH8633

Phone

0041 (0)55 253 51 11

View All Listings by this Company

Manufacturer:

Schulthess Maschinen AG

Company Name

Schulthess Maschinen AG

Address

Landstrasse 37 Wolfhaussen Switzerland

Postcode

CH8633

Phone

0041 (0)55 253 51 11

View All Listings by this Company

'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. Between 1st January 2021 to 22nd November 2021, the material is for use with water up to 50°C. Between 23rd November 2021 and 31st January 2026, the material is for use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

2101522

Expiry date:

31/01/2026

Approval Holder:

Shalimar Paints Limited

Company Name

Shalimar Paints Limited

Address

Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403

Country

India

View All Listings by this Company

'81661723' washers. Black coloured, resin impregnated carbon graphite washer components manufactured by isotactic pressing, sintering and grinding. For use with water up to 85°C.

Section:

5022 Carbon

Expiry date:

28/02/2026

Approval Holder:

John Crane

Company Name

John Crane

Address

29 Burdent Dr. #31, Crystal Lake, IL 60014

Country

United States

View All Listings by this Company

'RS-0004'. White coloured, compression moulded seal ring manufactured from 'ADR 96' ceramic material. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

31/01/2026

Approval Holder:

CoorsTek Advanced Materials Turnov s.r.o.

Company Name

CoorsTek Advanced Materials Turnov s.r.o.

Address

Za Viaduktem 2150 511 01 Turnov

Country

Czech Republic

View All Listings by this Company