Directory Search Results

Print List

#2103303

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103303
Size:
½” BSP (M) inlet connection.
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/03/2026
Model:
8504.38 WC cistern (without frame) 8533.38 with dry wall frame height 820mm
Product Images

Approval Holder:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#2104902

BS EN 997:2018 RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan (Ceramic), Thomas Dudley ‘A’ frame incorporating a Thomas Dudley Vantage Concealed cistern with a side entry compact type float operated inlet valve which discharges via a Type AG airgap and a dual flush pneumatic drop valve capable of full flush volumes of 4.5 litres and a reduced flush of 3 litres. The inlet connection hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2104902
Size:
15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Corner of wall hung pan marked ‘RAK CERAMICS’
Installation Requirements:
R001 R559
Expiry date:
30/04/2026
Model:
RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan and Thomas Dudley Illusion A or Illusion Compact Universal Frame

Approval Holder:
Ruddy Joinery & Fit-Out Specialists
Company Name
Ruddy Joinery & Fit-Out Specialists
Postcode
MK45 5BS

View All Listings by this Company

Print This Approval


#2105320

Standpipe assembly break tank with a Type ‘AB’ air gap (verified by test – suitable for backflow protection against fluid category 5) mounted to the top of the standpipe body. The tank is filled via a compact float valve and has two screened weir slots. Water is then supplied by gravity from the break tank to the hose outlet below. Flow is activated via a spherical valve located behind a lockable panel. In addition to the isolation valve, the product incorporates a single check valve assembly (suitable for backflow protection against Fluid Category 2) prior to the spherical valve and an in-line ‘Y’ pattern strainer after it. The spherical valve includes a drain plug to allow for draining. Insulation is provided up to the drain point. Maximum working pressure 10.0 bar. Cold water use only.

Section:
0009 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
WRAS Approval Number:
2105320
Note:
The MDPE pipe manufactured to BS EN 12201-2:2011 noted under size is not supplied or included under the scope of this approval.
Size:
20mm, 25mm or 32mm compression (for use with MDPE pipe manufactured to BS EN 12201-2:2011 only).
Marking:
Arrow valve, product code, manuafcturers website and tel no. on adhesive label on front cover.
Installation Requirements:
R001 R415 R430 R511
Expiry date:
31/05/2026
Model:
SPFC5X20, SPFC5X25, SPFC5X32.
Product Images

Approval Holder:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Country
Herts
Phone
01442 823 123
General Email
enquiries@arrowvalves.co.uk

View All Listings by this Company
Manufacturer:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Country
Herts
Phone
01442 823 123
General Email
enquiries@arrowvalves.co.uk

View All Listings by this Company

Print This Approval


#2106039

DC type pipe interrupter with a permanent atmospheric vent and DZR brass body and EPDM gasket. Maximum working pressure 3.0 bar. Maximum operating temperature 85°C.

Section:
0014 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2. Type DC - Pipe interrupter with permanent atmosphere vent. The device must be fitted with the lowest point of the air aperture not less than 150mm above the free discharge point, or spillover level of an appliance, and have no valve, flow restrictor or tap on its outlet.
WRAS Approval Number:
2106039
Size:
½” BSP (F) inlet/½” BSP (M) outlet
Marking:
TOF logo, date of manufacture (DD-MM-YYYY), flow arrow, CR on body
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
1000/551
Product Images

Approval Holder:
TOF SRL
Company Name
TOF SRL
Address
Via Dell'erica 16/18 28017 San Maurizio D'opaglio Italy

View All Listings by this Company
Manufacturer:
TOF SRL
Company Name
TOF SRL
Address
Via Dell'erica 16/18 28017 San Maurizio D'opaglio Italy

View All Listings by this Company

Print This Approval


#2106031

Spring loaded resilient trim, in-line check valve cartridge with plastic guides and stem and EPDM seals within a plastic housing. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2106031
Marking:
Korie, 1st 4 digits of product code, (e.g. OF14) and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
OF14200000 DN14, OF15200000 DN15, OF20200000 DN20, OF25200000 DN25.
Product Images

Approval Holder:
Yuhuan Korie Plastic Factory
Company Name
Yuhuan Korie Plastic Factory
Address
Technology Industry Functional Area, Chumen Village Yuhuan
Country
Zhejiang

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 94 of 705

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.