Directory Search Results

Print List

#240604022

Domestic hot water heat recovery unit incorporating a stainless steel plate heat exchanger. The product is supplied with 15mm x 15mm compression 90° elbows for installation on the inlet and outlet. Maximum operating pressure 10 bar. Maximum operating temperature 80°C

Section:
1350 Heat Exchangers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression elbow
Marking:
Worcester (brand of the Bosch group), serial no., model name and technical information on adhesive label on outer casing.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
Greenstar 8-718-644-603

Approval Holder:
Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.
Company Name
Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.
Address
Organize Sanayi Bolgesi, 45030 Manisa, Turkey

View All Listings by this Company
Manufacturer:
Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.
Company Name
Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.
Address
Organize Sanayi Bolgesi, 45030 Manisa, Turkey

View All Listings by this Company

Print This Approval


#2204367

‘POD’ range of indirect and direct heat interface units providing space heating and instantaneous hot water. The heat transfer is generated via plate heat exchangers. The domestic hot water (DHW) circuit incorporates an adjustable temperature mixing valve. The indirect models incorporate an expansion vessel (on the CW inlet of the DHW circuit) and a pressure relief valve set at 3.0 bar (on the space heating circuit). The indirect models only are supplied with a temporary filling loop, which comprises of a stainless steel braided EPDM lined flexible hose assembly and a lever operated spherical valve for connection to the primary circuit. The angled cold water inlet incorporates an isolation valve and a branch to connect to the filling loop, which includes a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3). Maximum working pressure for indirect units: Primary circuit: 16.0 bar. Space heating: 2.5 bar. Secondary circuit (DHW): 10.0 bar. Maximum working pressure for direct units: Primary circuit: 10.0 bar. Space heating: 10.0 bar. Secondary circuit (DHW): 10.0 bar. Maximum operating temperature for domestic hot water 65°C. Maximum operating temperature for central heating and primary circuit 85°C.

Section:
1350 Heat Exchangers
Size:
22mm copper pipe connection.
Marking:
Ideal Heating badge and model on adhesive label on front casing. Manufacturer, serial number, model number, pressure rating and other technical information on data label within appliance.
Installation Requirements:
R001 R140 R360
Expiry date:
30/04/2027
Model:
POD i305LOR POD i405LOR POD i505LOR POD i605LOR POD i705LOR

Approval Holder:
Ideal Boilers Ltd
Company Name
Ideal Boilers Ltd
Address
PO Box 103 National Avenue Hull East Yorkshire
Postcode
HU5 4JN
Country
United Kingdom
Phone
07775659359
General Email
ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company
Manufacturer:
Ideal Boilers Ltd
Company Name
Ideal Boilers Ltd
Address
PO Box 103 National Avenue Hull East Yorkshire
Postcode
HU5 4JN
Country
United Kingdom
Phone
07775659359
General Email
ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company
Manufacturer:
Ideal Boilers Ltd
Company Name
Ideal Boilers Ltd
Address
PO Box 103 National Avenue Hull East Yorkshire
Postcode
HU5 4JN
Country
United Kingdom
Phone
07775659359
General Email
ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Print This Approval


#240604704

Range of electric instantaneous heated showers, incorporating a solenoid valve to control the flow. Products are supplied with a shower hose and handset. Maximum supply pressure 10 bar. Maximum operating temperature 45°C.

Section:
1370 Heaters
Section Subtitle:
Electric instantaneous, shower hose. Heat retained in instantaneous water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240604704
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression.
Marking:
Mira, advanced and model on body and adhesive label on the underside.
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
1.1785.001 - MIRA ADVANCE 8.7KW, 1.1785.002 - MIRA ADVANCE 9.8KW, 1.1785.003 - MIRA ADVANCE 8.7KW FLEX, 1.1785.004 MIRA ADVANCE 9.8KW FLEX, 1.1785.005 MIRA ADVANCE 8.7KW FLEX EXTRA, 1.1785.006 MIRA ADVANCE HEATLOOP 8.7KW,

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#240602039

Range of water meters (blue epoxy coated, cast iron bodies). Maximum working pressure 20 Bar. Maximum operating temperature 30°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
WE050HK200 - DN50 WE065IK200 - DN65 WE080JK200 - DN80 WE100KK250 - DN100/125 WE150MK300 - DN150 WE200MG350 – DN200 WE250OG450 – DN250
Marking:
Itron, serial number, product info on meter face. Size, flow arrow on body
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
WE050HK200 WE065IK200 WE080JK200 WE100KK250 WE150MK300 WE200MG350 WEG250

Approval Holder:
Itron Metering Solutions UK Ltd
Company Name
Itron Metering Solutions UK Ltd
Address
Unit 10, Haven Exchange Felixstowe Suffolk
Postcode
IP11 2QX
Phone
+44 161 865 1181

View All Listings by this Company

Print This Approval


#240502069

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
CZUS & Company logo on cap. Company Information,, product information and model range on label under the plastic lid.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
CZUS 13905XXX DN: 40 mm (Composite Body, 2" BSP (M) 1CZUS 13915XXX COMPOSITE BODY DN: 50 mm 2.1/4" BSP (M) CZUS 139XXXXX IRON BODY DN: 50-300 mm (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.

Approval Holder:
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Company Name
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Address
Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 905 of 1622

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.