Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2110037

Range of ozone cleaning units with a plastic body. The water which is discharged from these units is intended to be used for cleaning surfaces. The products incorporate a filter (cartridge and housing), pressure regulator and a stainless-steel strainer at the inlet. The flow is controlled via a metal solenoid which is operated by a switch on the front panel. Maximum working pressure 5.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
Size:: ¾” captive nut
Marking:: Tersano, model & product info on label on body
Installation Requirements:: R001 R008 R040 R160
Expiry date:: 31/10/2026
Proviso:: The product(s) listed on this approval fall under the scope of the UK/EU Biocidal Products Regulations (UK/EU BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the UK-EU Biocidal Products Regulations.
Model:: Lotus Pro SAO Dispenser LQFC 275/FB. Lotus Pro Stabilizer FBSA04 LCA 114K-FB. Lotus Pro Stabilizer FBSA024 LCA 118K-FB.

Approval Holder:: Tersano

Company Name
Tersano
Address
Pure Offices, Lake View House, Tournament Fields, Warwick
Postcode
CV34 6RG

View All Listings by this Company
Manufacturer:: Tersano Inc.

Company Name
Tersano Inc.
Address
3440 North Talbot Road, Old Castle, Ontario
Postcode
N0R 1L0
Country
Canada

View All Listings by this Company

WRAS Approval Number: #2208530

'DURACON® M25-44 WK2001, M90-44 WK2001 & M270-44-WK2001'. White coloured, injection moulded POM materials. For use with water up to 85°C.

Section:: 5015 Acetal
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2208530
Expiry date:: 31/08/2027

Approval Holder:: Polyplastics Co., Ltd.

Company Name
Polyplastics Co., Ltd.
Address
JR Shinagawa East Building, 18-1, Konan 2-Chome, Minato-Ku, Tokyo, 108-8280
Country
Japan
Phone
+81 3 6711 8605 Fax: +81 3 6711 8633

View All Listings by this Company

WRAS Approval Number: #2207541

`4300314` (grey coloured) & '4300315' (black coloured). Injection moulded ABS material. For use with water up to 85°C.

Section:: 5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)
Expiry date:: 31/07/2027

Approval Holder:: Zhejiang Kaiyue Plastic Industrial Co., Ltd.

Company Name
Zhejiang Kaiyue Plastic Industrial Co., Ltd.
Address
No 166 Jia Xi Road, Jianshan Town, Pan An Industry Zone, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2208517

'Endolac 245.30 FGC'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's technical data sheet dated 04/05/2022. Cure for 7 days@20°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 2208517
Expiry date:: 31/08/2027

Approval Holder:: BS Coatings

Company Name
BS Coatings
Address
Allee Paul Sabatier, BP 88, 27940 Aubevoye
Country
France
Phone
+ 33 32773077

View All Listings by this Company

WRAS Approval Number: #2301501

‘Sonergy AW008’. White coloured, compression moulded ceramic material. For use with water up to 85°C.

Section:: 5023 Ceramic
Expiry date:: 31/01/2028

Approval Holder:: Kuching International Ltd.

Company Name
Kuching International Ltd.
Address
No.19, Aly. 109, Ln. 73, Sec. 2, Zhongshan Road, Tanzi District, Taichung City 427
Country
Taiwan

View All Listings by this Company