'EP11/8/3 BLK'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 80. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

250355005

Expiry date:

31/03/2030

Approval Holder:

Superior Seals Ltd.

Company Name

Superior Seals Ltd.

Address

Nimrod Way, Ferndown Industrial Estate, Ferndown, Dorset

Postcode

BH21 7SH

Country

UK

Phone

01202 854 300

General Email

sales@superiorltd.com

View All Listings by this Company

'E13970'. Black coloured, injection moulded EPDM material. Shore hardness 65. Tested in-radius size 1.3mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240955014

Expiry date:

30/09/2029

Approval Holder:

Berwin Polymer Processing Group

Company Name

Berwin Polymer Processing Group

Address

Broadway, Globe Lane Industrial Estate, Dukinfield, Cheshire

Postcode

SK16 4UJ

View All Listings by this Company

'NB01280PWRC'. Black coloured, compression moulded NBR rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5395 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250255004

Expiry date:

28/02/2030

Approval Holder:

Chang Horing Rubber Co., Ltd.

Company Name

Chang Horing Rubber Co., Ltd.

Address

No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien

Country

Taiwan

Phone

+886 4 7810868

View All Listings by this Company

'ERIKS 366207'. Black coloured, compression moulded NBR rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5395 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250255005

Expiry date:

28/02/2030

Approval Holder:

Eriks Group

Company Name

Eriks Group

Address

Toermmalijnstraat 5, 1812 RL Alkmaar, Postbus 280, 1800 BK Alkmaar

Country

Netherlands

General Email

info@eriks.com

View All Listings by this Company

'NB012370P(KAWN)'. Black coloured, compression moulded NBR material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5395 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240955023

Expiry date:

30/09/2029

Approval Holder:

Chang Horing Rubber Co., Ltd.

Company Name

Chang Horing Rubber Co., Ltd.

Address

No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien

Country

Taiwan

Phone

+886 4 7810868

View All Listings by this Company

'HTA Brown CPVC Fittings'. Brown coloured, injection moulded CVPC fittings. For use with water up to 70°C.

Section:

5301 Polyvinylchloride (PVC, PVC-U and CPVC)

Section Subtitle:

Components.

WRAS Approval Number:

240955015

Expiry date:

30/09/2029

Approval Holder:

Girpi

Company Name

Girpi

Address

Rue Robert Ancel, 76700 Harfleur

Country

France

Phone

02 32 79 60 00

View All Listings by this Company

'HTA-F Orange CPVC Pipe & HTA Brown CPVC Pipe'. Extruded, CPVC pipes. For use with water up to 70°C.

Section:

5301 Polyvinylchloride (PVC, PVC-U and CPVC)

Section Subtitle:

Components.

WRAS Approval Number:

240955016

Expiry date:

30/09/2029

Approval Holder:

Girpi

Company Name

Girpi

Address

Rue Robert Ancel, 76700 Harfleur

Country

France

Phone

02 32 79 60 00

View All Listings by this Company

Bottom entry A1370A and side entry A1423B BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer. A1270A - plastic or brass connector. A1423B - plastic connector only. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240904722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

IRN R560 Only applies to the bottom entry valve.

Size:

½” BSP (M)

Marking:

R&T, model & BS1212-4 & datum level on body.

Installation Requirements:

R001 R550 R560

Expiry date:

30/09/2029

Model:

A1370A 13½” A1370A 11½” A1423B

Product Images

Approval Holder:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

General Email

rt025@rtplumbing.com

View All Listings by this Company

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

General Email

rt025@rtplumbing.com

View All Listings by this Company

Range of floor mounted single hole, single outlet (fixed), combination tap assembly (various plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0675 Combination Tap Assemblies

Section Subtitle:

Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

240902044

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Lanbiao on operating member

Installation Requirements:

R001 R020

Expiry date:

30/09/2029

Model:

F9918-XX Where XX denotes the finish and can be replaced with any of the following: No Suffix = Chrome H = Black DYB = Matte White BZ = Perl White Painted HGTS = Red Bronze HTL = Yellow Bronze Brushed Q = Bronze QTSL = Bronze Brushed Bright WTS = Bronze Brushed Matte STS = Acid Copper Brushed SDMGJ = Water Plated Rose Gold N = Nickel Brushed Bright Light NP = Nickel Brushed TJ = Titanium Gold TJLS = Titanium Gold Brushed G = Gold GJS = Gold Brushed GJSY = Zirconium Gold Wire Drawing Matte PGJFY = Zirconium Gold Wire Drawing Matte Bright Light PLSJ = Brushed Gold LSJY = Brushed Gold Matte MGJ = Rose GHold MGJL = Rose Gold Brushed DMGJ = Light Rose Gold Brushed HTS = Red Bronze Brushed QHP = Grey LSQH = Grey Brushed LHMGJ = Brushed Yellow Rose Gold

Product Images

Approval Holder:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

General Email

957989256@qq.com

View All Listings by this Company

Manufacturer:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

General Email

957989256@qq.com

View All Listings by this Company

Range of single hole, single outlet (swivel nozzle) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with cross top or lever type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure - 5 Bar Maximum operating temperature - 60 °C

Section:

0410 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet swivel spout with swivel nozzle.

WRAS Approval Number:

241002070

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are supplied with a lever type waste set – Not verified by test.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.

Marking:

Volevatch on front of tap body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/10/2029

Model:

B/00-E5-00-CD B/00-E5-00-CGE B/00-E5-00-M -CD: straight cross handles -CGE: water cross drop handles -M: lever handles

Product Images

Manufacturer:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company