Directory Search Results

Print List

#2107052

Range of three-hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever (20815882 model) or cross top (20815892 model) operating members. The product is supplied with stainless steel braided PEX lined flexible hose assemblies for installation between the side valves and the spout. The spout outlets incorporate a plastic aerator. The side valves are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2107052
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½" captive nut end connections.
Marking:
Dornbracht on base of spout.
Installation Requirements:
R001 R006 R007 R010
Expiry date:
31/07/2026
Model:
20815882, 20815892.
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company
Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2106331

Three hole, wall mounted, concealed basin mixer with a brass body (chrome plated) consisting of a rough in set 45089 and extermnal trim 46090. Incorproating a quarter turn ceramic disc headworks and single lever operating members.The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2106331
Size:
½” BSP (F)
Marking:
Gessi on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2026
Model:
45089+46090
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2105031

Range of wall mounted (swivel) spout outlets with chromium plated brass bodies, EDPM ‘O’-rings and a plastic flow straightener. DJ suffix models have a double swivel arm. Maximum operating temperature 65°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
2105031
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Top rinse (brand of Zhejiang Sunmixer Sanitary Ware CO.,LTD) and WRAS on base of spout.
Installation Requirements:
R001 R040
Expiry date:
31/05/2026
Model:
9808-X Where X can be replaced by any of the following codes to determine the swivel radius of the spout. Single swivel arm: 06 = 6” 08 = 8” 10 = 10” 12 = 12” 14 = 14” 16 = 16” 18 = 18” P1 = 2-3/4” P2 = 2-11/16” P3 = 5-11/16” P4 = 7-3/4” P5 = 8-3/4” P6 = 12-1/4” Double swivel arm: 006DJ = 6” + 6” 007DJ = 6” + 9” 008DJ = 6” + 12” 009DJ = 12” + 12”
Product Images

Approval Holder:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company
Manufacturer:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

Print This Approval


#2110700

‘Quattroselect’ range of chemical dosing units incorporating a lockable self-closing trigger assembly and a self-closing bottle filler assembly which control the flow. The products are supplied with an approved double check valve assembly at the inlet (suitable for backflow prevention against fluid category 3). Maximum working pressure 5.8 bar. Cold water use only.

Section:
0970 Dosing Equipment
Section Subtitle:
Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed
WRAS Approval Number:
2110700
Size:
¾” BSP (M)
Marking:
Quattroselect on hose trigger. Diversey on label on door panel. Quattroselect on front panel. Other product info inside door panel.
Installation Requirements:
R001 R160 R040
Expiry date:
31/10/2026
Proviso:
Not suitable for use with chemicals greater than a fluid category 3 risk.
Model:
1219424 – QuattroSelect Pouch air gap CW 1219425 – QuattroSelect Pouch safe gap CW 1211418 – QuattroSelect Pouch air gap

Approval Holder:
Diversey Europe Operations BV.
Company Name
Diversey Europe Operations BV.
Address
De Boelelaan 32, 1083 HJ Amsterdam, Netherlands

View All Listings by this Company

Print This Approval


#2009056

Range of water filters comprising of plastic filter heads and plastic filter cartridges with granular activated carbon (Purity C50 fresh only), calcium carbonate (Purity Fresh C50 only) or granular activated carbon and ion exchange resin (all other models). The push-fit models are for use with John Guest LLDPE tube. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2009056
Note:
Discharge from the rinsing tube must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
G3/8” filter heads: ⅜” BSP (M) inlets and outlets. JG/8 filter heads: 8mm push-fit inlets and outlets.
Marking:
BRITA, model number, maximum temperature, maximum pressure and other technical information on adhesive label on body and filter head.
Installation Requirements:
R001 R120 R150 R170
Expiry date:
30/09/2025
Model:
Filter Cartridges: Purity C25 Quell ST, Purity C50 Quell ST, Purity C150 Quell ST, Purity C300 Quell ST, Purity C500 Quell ST, Purity C1100 Quell ST. Purity C150 Finest, Purity C300 Finest, Purity C500 Finest, Purity C1100 Finest. Purity Fresh C50. PURITY C300 DISPENSER, PURITY C500 DISPENSER, PURITY C1100 DISPENSER. PURITY C500 MinUp. P1000, P3000. Filter Heads: 0-70% G3/8” (1013637), 0-70% JG/8 (1013636), 0% G3/8” (1002949), 0% JG/8 (1002942), 30% G3/8” (1002952) & 30% JG8 (1002945).
Product Images

Approval Holder:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 88 of 827

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.