Directory Search Results

Print List

#240902047

Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The products incorporate metal backnuts. Maximum working pressure 8.62 Bar Maximum operating temperature 60.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240902047
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSPP (M) with a 1/2" BSPP (F) x 1/2" BSPT (F) adapter
Marking:
T&S logo on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2029
Model:
UK-1DFXX UK-1DFXX-WH4 Where XX denotes the spout length and can be replaced with any of the following: 00 = No spout 06 = 6” spout length 08 = 8” spout length 10 = 10” spout length 12 = 12” spout length
Product Images

Approval Holder:
T & S Brass & Bronze Works Inc
Company Name
T & S Brass & Bronze Works Inc
Address

View All Listings by this Company
Manufacturer:
T & S Brass & Bronze Works Inc
Company Name
T & S Brass & Bronze Works Inc
Address

View All Listings by this Company

Print This Approval


#241002022

Single-hole, single outlet, (swivel) combination tap assembly (brass body – various finishes), incorporating quarter turn ceramic disc headworks various operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating emperature 65.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241002022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
The ‘Coalbrook’ logo is etched on the lower rear of the basin mixer body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
XX 1002 YY Typical product code – XX1002YY First letters (e.g. XX) – These are replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. Examples are: DO which represents the name ‘Domo’ DC which represents the name ‘Decca’ BA which represents the name ‘Bank’. Middle numbers (e.g. 1002) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#241002072

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241002072
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
M10 (F)
Marking:
Clearwater logo on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2029
Model:
ZO2CP,ZO2BN,ZO3CN,ZO3BN,ZO4CP,ZO4BN
Product Images

Approval Holder:
Clearwater Products Ltd
Company Name
Clearwater Products Ltd
Address
Unit 5603 Shannon Place Tewkesbury Place
Postcode
GL20 8SL

View All Listings by this Company

Print This Approval


#241002073

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with stainless-steel braided PEX lined connecting hoses and metal back nuts. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241002073
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
1810 Logo on operating member.
Installation Requirements:
R001 R006 R007 R009 R010
Expiry date:
31/10/2029
Model:
TRA/01/CH (Chrome) TRA/02/BS (Brushed Steel) TRA/04/COP (Copper) TRA/05/GM (Gunmetal) TRA/06/GB (Gold) TRA/07/MB (Matt Black) TRA/08/BGB (Brushed Gold)
Product Images

Print This Approval


#241002074

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes). Incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241002074
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
M12 (F)
Marking:
Clearwater logo on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2029
Model:
27113CP & 27113BS
Product Images

Print This Approval


#241004010

Range of two hole, single outlet fixed combination tap assemblies, (brass bodies – various finishes) incorporating a push to open and push to close headwork. The spout outlet incorporates a plastic aerator and the product is supplied with a waste set not verified by test. Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241004010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP (F) captive nut end connections.
Marking:
Hansgrohe on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
73 053 xx0 73 353 xx0 Additional information. (list any further information regarding the product or range, e.g.: key for model code, prefix/suffixes describing finishes, variants of operating member, etc.) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#241004015

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes). Incorporating a ceramic cartridge headworks and single lever operating member. The spout outlet incorporates an aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241004015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP(F)
Marking:
Villeroy & Boch logo on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
TVW107008000XX Liberty TVW122006000XX Empora TVW107008001XX Liberty TVW122007000XX Empora XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#241004020

Range of two hole, single outlet, fixed combination tap assemblies, (stainless steel bodies – various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241004020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
+TSL on spout
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
TSL.970.CS Satin TSL.970.C Chrome TSL.970.BK Black TSL.970.BR Brass TSL.970.CP Copper TSL.970.BZ Bronze
Product Images

Approval Holder:
The Splash Lab UK
Company Name
The Splash Lab UK
Address
Unit 34 Meadow Industrial Estate Stockport
Postcode
SK1 2BU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#241002042

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic disc headwork with single lever operating members and manually operated bath/shower diverter. The spout outlets of all models, except XB-SL-038T, incorporate a plastic aerator or flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature of model XB-SL-038T is 85°C. All other models have a maximum operating temperature of 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
241002042
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP male.
Marking:
XU SHENG on top of body.
Installation Requirements:
R001 R006 R020
Expiry date:
31/10/2029
Model:
XB-SL-038T, XB-SL-047, XB-SL-048 & XB-SL-052.
Product Images

Approval Holder:
Taizhou Xusheng Sanitary Ware Co. Ltd
Company Name
Taizhou Xusheng Sanitary Ware Co. Ltd
Address
No. 1, Lane 318, Binxiang Road, Sanjia Street, Taizhou City,Zhejiang Province,China Taizhou Bay New District, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Print This Approval


#241002043

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic disc headwork with single lever operating members and manually operated bath/shower diverter. The spout outlet incorporates a flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
241002043
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP male.
Marking:
XU SHENG on top of body.
Installation Requirements:
R001 R005 R020
Expiry date:
31/10/2029
Model:
XB-SL-050
Product Images

Approval Holder:
Taizhou Xusheng Sanitary Ware Co. Ltd
Company Name
Taizhou Xusheng Sanitary Ware Co. Ltd
Address
No. 1, Lane 318, Binxiang Road, Sanjia Street, Taizhou City,Zhejiang Province,China Taizhou Bay New District, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 842 of 1153

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.