Range of combined bath filler and/or waste and overflow assemblies (see models) in various finishes. Maximum operating temperature: 60ºC

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241002055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Stainless steel braided, EPDM lined, flexible hose assembly with a ½” BSP (F) captive nut (Filling Hose) and 1½” BSP (M) (Pop Up Waste)

Marking:

WRAS approved, CGS logo and product code on face plate

Installation Requirements:

R001 R576

Expiry date:

31/10/2029

Model:

SK134YY.XX (filler, waste and overflow), SK132YY.XX (filler, waste and overflow), SK122YY.XX (filler, waste and overflow), SK14YY.XX (waste and overflow). Model added February 2025: SK157YY.XX (filler, waste and overflow). Where YY denotes the overflow hose length and can be replaced with the following. Blank = max. 80cm, -1 = max. 125cm. Where XX denotes the finish, and can be replaced with any of the following: 01 = Standard Chrome, 05 = PVD Chrome, 06 = Black Chrome, 12 = Gold, 15 = Rose Gold, 17 = PVD Gold, 25 = Brushed Bronze, 26 = Brushed Copper, 33 = White Matt, 35 = White, 43 = Black Matt, 45 = Black, 40 = Brushed Nickel.

Approval Holder:

C.G.S. S.R.L.

Company Name

C.G.S. S.R.L.

Address

Via Torino 9/A Cureggio (NO)

Postcode

28060

Country

Italy

General Email

f.cerutti@cgsmixer.com

View All Listings by this Company

Range of floor standing, single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a manually operated diverter to a shower outlet. The spout outlet incorporates a plastic aerator. Model F9912-** incorporates a single check valve cartridge at the inlet, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241004005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

F9902 - Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections. F9912 - ½” BSP (M)

Marking:

Lanbiao etched on operating member.

Installation Requirements:

R001 R010 R030

Expiry date:

31/10/2029

Model:

F9902-** F9912-** **Represents the following different surface treatments on body: 1. H‐Black 2. N‐ Nickel Brushed 3. GJS‐ Zirconium gold brushed 4. G‐ Zirconium gold 5. QTSL‐ Brushed bronze bright 6. QTS‐Brushed Bronze Matte 7. TJ‐ Titanium 8. TJLS‐ Titanium brushed 9. MGJ‐ Rose gold 10. MGJL‐ Rose gold brushed 11. HGT‐ Red bronze 12. HTL‐ Brushed brass 13. HTS‐ Brushed copper 14. PVDQH‐Gun Ash 15. HQ‐Gun Ash Brushed 16. Q‐Bronze 17. DYB‐Electrophoresis Matt White 18. STS‐Acid copper brushed 19. BZ‐Spray pearl white 20. B‐Spray matt white

Manufacturer:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

View All Listings by this Company

Range of wall mounted bath spout outlets with brass bodies (various finishes) with a plastic aerator incorporated into the outlet. Maximum working pressure: 5 bar. Maximum operating temperature 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

241002068

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model below

Marking:

Volevatch on Escutcheon

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

B/D6-B9-00 Wall-mounted small straight tub spout from Bistrot collection ¾" BSP (M). B/D7-B9-00 Wall-mounted long straight tub spout from Bistrot collection ¾" BSP (M). P/Fl-B7-00 Short wall tub filler from Piet collection ¾" BSP (M). P/Fl-B8-00 Long wall tub filler from Piet collection ¾" BSP (M). B/D2-L2-00 Wall-mounted straight spout from Bistrot collection ½" BSP (M). P/D8-L4-00 Wall-mounted straight spout from Piet collection ½" BSP (M). B identifies model as Bistrot collection & P as Piet collection.

Manufacturer:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company

Range of wall mounted spout outlets (brass bodies - various finishes) incorporating a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

241004011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M)

Marking:

Villeroy & Boch logo on mounting ring

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

TVW10612A151XX Dawn TVW10612A152XX Dawn TVW10612A153XX Dawn TVT106505151XX Dawn TVT106505152XX Dawn TVT106505153XX Dawn XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Ranges of cylindrical or tubular expansion vessels with epoxy coated or uncoated steel bodies and either Butyl or EPDM membranes. Maximum working pressure of Tube models is 8.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 99°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

241102702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.

Size:

INOX ULTRA-PRO – 1” BSP (M), TUBE – ½” BSP (M), TURBOFLEX – ½” BSP (M) inlet and outlet.

Marking:

Zilmet and product information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

INOX ULTRA-PRO - 10 bar 22 (Type 24), 50, 60 and 100 litres (Horizontal and Vertical Stand). TUBE 8 bar - 4 litres. TURBOFLEX 10 bar- 4 litres MODELS ADDED NOVEMBER 2024: TUBE – 2L & 3L.

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company