Range of flow-compensated (thermostatic) temperature controllers incorporating a brass body with EPDM ‘O’-rings and gaskets. The valves incorporate a non-rising spindle headwork for temperature regulation. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C

Section:

1530 Miscellaneous Fittings

Size:

¾" BSP captive nut inlets x ¾” BSP (M) outlets

Marking:

Danfoss logo, PN, sales number and date of manufacture WWYY on body.

Installation Requirements:

R001

Expiry date:

31/03/2029

Model:

IHPT 2.0 003L3651 (Thermostatic controller IH90 size DN15), IHPT 2.0 003L3653 (Thermostatic controller IH180 size DN15).

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Manufacturer:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Range of concealed rough-in sets with brass bodies, intended for use in conjunction with trim and finish sets. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

1530 Miscellaneous Fittings

Size:

½” BSP (F)

Marking:

Axor on adhesive label

Installation Requirements:

R001 R040

Expiry date:

30/04/2029

Model:

13 129 180 45 442 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: MH Three phase models 85°C, MH Single phase models 55.0°C and EH sp models 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104082

Size:

EH models: 1 ¼” BSP (F) – 2” BSP (F) EHsp models: 1” BSP (F)

Marking:

Data label showing Franklin electric S.r.l, model number, PMAX and other technical info on body. WRAS label on body. Max temperature on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

Horizontal Multi-Stage Pumps : 3 MH A XX Z-MM EN 5 MH A XX Z-MM EN 9 MH A XX Z-MM EN 15 MH A XX Z-MM EN 20 MH A XX Z-MM EN Where: A= Pump material: “EMPTY” for AISI 304 and “N” for AISI 316; XX= n. of stages ( 50 Hz single phase): - from 2 to 9 for EH 3 & 5; - from 2 to 6 for EH 9; - from 2 to 3 for EH 15; - 2 for EH 20; n. of stages ( 50 Hz three phase): - from 2 to 9 for EH 3 & 5; - from 2 to 8 for EH 9; - from 2 to 7 for EH 15; - from 2 to 5 for EH 20; n. of stages ( 60 Hz single phase): - from 2 to 7 for EH 3; - from 2 to 5 for EH 5; - from 2 to 3 for EH 9; - No EH 15&20 60Hz single phase; n. of stages ( 60 Hz three phase): - from 2 to 7 for EH 3 & 5; - from 2 to 5 for EH 9; - from 2 to 4 for EH 15; - from 2 to 3 for EH 20; Z=Connection Type: “B” for “Rp” and “P” for “NPT”; MM=motor connection and frequency as follows: 5M=single phase and 50Hz 5T=three phase and 50Hz 6M=single phase and 60Hz 6T=three phase and 60Hz EN= Type of mechanical seal: “E0 – E1 – E2” for EH 3/5/9 ; “E1 – E2” for EH 15/20

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

‘Right Pump’ range of single and twin pumps with plastic bodies. The universal models incorporate a non-return valve on the outlet(s) of the pump body (x2 for the RP50TU model) and an expansion vessel. The twin models incorporate a bypass tube between each side of the pump. The inlet(s) of the pump body incorporate(s) a combined EPDM washer and stainless-steel strainer. The inlet and outlet hoses incorporate an isolation valve on the pushfit connection. The push fit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 1.5 to 3.6 bar (see model). Maximum operating temperatures 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240402714

Size:

RP50PT model: Stainless steel braided EPDM lined flexible hose assemblies with 15mm pushfit end connections. All other models: Stainless steel braided EPDM lined flexible hose assemblies with 22mm pushfit end connections.

Marking:

Salamander logo, model name and product information on label.

Installation Requirements:

R001 R150 R415

Expiry date:

30/04/2029

Model:

RP50PT - 1.5 Bar Twin Pump (Positive), RP75PT - 2.2 Bar Twin Pump (Positive), RP100PT - 3.0 Bar Twin Pump (Positive), RP50TU - 1.5 Bar Twin Pump (Universal), RP75TU - 2.2 Bar Twin Pump (Universal), RP100TU - 3.0 Bar Twin Pump (Universal), RP55SU - 1.5 Bar Single Pump (Universal), RP80SU - 2.4 Bar Single Pump (Universal), RP120SU - 3.6 Bar Single Pump (Universal). Where: RP = (Right Pump). 50/55 = 1.5 Bar, 75 = 2.2 Bar, 80 = 2.4 Bar, 100 = 3.0 Bar, 120 = 3.6 Bar. P = Positive (No expansion vessel). U = Universal (With expansion vessel). T = Twin. S = Single.

Approval Holder:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Manufacturer:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Range of 3 or 4 stage permanent magnet variable frequency pumps, with stainless steel bodies, plastic impellers (3 stage model) or stainless steel impellers (4 stage models). Product incorporates an internal shock arrestor. Maximum working pressure 6.5 Bar. Maximum operating temperature 75°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240404710

Size:

GT prefix, T42 & T50 models: 1” BSP (F). T8-50 & T8-60 models: 2” BSP (F).

Marking:

Geocon, model no., temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2029

Model:

3 stage models: GT40 (0.37kW), GT46 (0.55kW), GT55 (0.68kW), GT60 (0.88kW), T42 (0.68kW), T50 (0.85kW). 4 stage models: T8-50 (1.5kW), T8-60 (2.2kW).

Approval Holder:

Geocon Global Co., Ltd.

Company Name

Geocon Global Co., Ltd.

Address

2F., No. 25-1, Minle St., East Dist., Chiayi City 600

Country

Taiwan

View All Listings by this Company