Range of ultrasonic remote transmission water meters with stainless steel body. The products incorporate a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) & 1” BSP (M) Size added October & November 2024 ¾” BSP (M)

Marking:

Manufacturer’s logo, model, WRAS, flow arrow. Date of manufacture (MM/YY) and technical info on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

LXCY-15 & LXCY-25 Model added October 2024 LXCY-20 3/4" BSP (M) Model added November 2024: LXCY_20 : 3/4" BSP (M)

Approval Holder:

Sanchuan Wisdom Technology Co., Ltd.

Company Name

Sanchuan Wisdom Technology Co., Ltd.

Address

Sanchuan Hydraulic Industrial Park, Longgang Section, Hi-Tech Development Zone, Yingtan, Jiangxi, P.R.China

View All Listings by this Company

Manufacturer:

Sanchuan Wisdom Technology Co., Ltd.

Company Name

Sanchuan Wisdom Technology Co., Ltd.

Address

Sanchuan Hydraulic Industrial Park, Longgang Section, Hi-Tech Development Zone, Yingtan, Jiangxi, P.R.China

View All Listings by this Company

Range of ‘Thermowatt’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD

Marking:

Thermowatt logo, Model, Voltage, Size and other information on cap.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:

Thermowatt S.p.A.

Company Name

Thermowatt S.p.A.

Address

Via San Giovanni Battista 21 Arcevia

Postcode

60011

Country

Italy

Phone

+39 0731988246

General Email

thermowatt@legalmail.it

View All Listings by this Company

`Prox’ and ‘Wave` ranges of sensor operated flow control devices incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm Spigot inlet x 1/2" BSP (M) outlet

Marking:

Y Stern logo on sensor unit

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Prox Sensor Range: 620200 620000 620700 Wave Sensor Range: 620420 620500 620810

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Company logo, Made in Italy, temperature and pressure cast on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

54DM15000 & 54DM15000XX Stopshock xx (Packaging variation)

Approval Holder:

Barberi Rubinetterie Industriali Srl

Company Name

Barberi Rubinetterie Industriali Srl

Address

Via Monte Fenera 7 13018 Valduggia Italy

Phone

+39 163 48 284

General Email

barberi@barberi.it

View All Listings by this Company

Range of positive displacement diaphragm pumps with plastic bodies, EPDM ‘O’-rings and TPE diaphragm. The product incorporates an integral bypass relief valve. For use with John Guest LLDPE Pipe. Maximum working pressure 12.0 Bar. Maximum operating temperature 40.0°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240702045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

5/16" Push fit, 3/8" Push fit.

Marking:

Aquatec name and logo, model number, serial number and date of manufacture (DD/MM/YY) on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

535X-2XXW-XXXX, 537X-2XXW-XXXX. Model Code Denotes: 1st & 2nd designators = 53 - Series Demand Delivery Pumps. 3rd designator is port size for pumphead housing, where ‘5’ = 3/8” or ‘7’ = 5/16” . 4th designator is cam angle for flow performance variation only. X can be 0 to 9. 5th designator ‘2’ indicates that pump has bypass relief control. 6th designator is for pressure setting of relief valve. X can be A to Z depending on pressure setting. 7th designator ‘X’ is a code for the specific materials in this model, e.g. Nylon pumphead housing. 8th designator ‘W’ = WRAS Compliant 9th - 12th designators XXXX can be any alphanumeric characters to denote electrical motor and motor mounting base plate combination.

Approval Holder:

Aquatec International Inc

Company Name

Aquatec International Inc

Address

17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Manufacturer:

Aquatec International Inc

Company Name

Aquatec International Inc

Address

17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company