Range of clamp fittings incorporating DZR brass bodies. For use with PE 100 RC pipe (manufactured to EN12201) only. Maximum operating pressure: 16 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

Uponor logo (U), CR, W (wipex code on connections) and size.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Wipex coupling: 1018328 (size 25x2,3-G1) 1018329 (size 32x2,9-G1) 1018330 (size 40x3,7-G1 ¼) 1018331 (size 50x4,6-G1 ¼) 1018332 (size 63x5,8-G2) 1018333 (size 75x6,8-G2) 1018334 (size 90x8,2G3) 1018335 (size 110x10,0-G3) Wipex tee: 1018345 (size G1-G1-G1) 1018346 (size G1 ¼-G1 ¼-G1 ¼) 1018347 (size G2-G2-G2) 1018348 (size G3-G3-G3) Wipex elbow: 1018350 (size G1-G1) 1018351 (size G1 ¼-G1 ¼) 1018352 (size G2-G2) 1018353 (size G3-G3) Wipex sleeve: 1018355 (size G1-G1) 1018356 (size G1 ¼-G1 ¼) 1018357 (size G2-G2) 1018358 (size G3-G3) Wipex flange: 1018359 (size F25/4-85/G1) 1018360 (size F32/4-100/G1 ¼) 1018362 (size F50/4-125/G2) 1018364 (size F80/8-160/G3) Wipex reducer male x female: 1018368 (size G1 ¼-G1) 1018369 (size G1 ½-G1 ¼) 1018371 (size G2-G1) 1018372 (size G2-G1 ¼) 1018374 (size G3-G1) 1018375 (size G3-G1 ¼) 1018376 (size G3-G2) Wipex jointing equal: 1042972 (size 25x2,3-25x2,3) 1042973 (size 32x2,9-32x2,9) 1042980 (size 40x3,7-40x3,7) 1042984 (size 50x4,6-50x4,6) 1042981 (size 63x5,8-63x5,8) 1042985 (size 75x6,8-75x6,8) 1042986 (size 90x8,2-90x8,2) 1042987 (size 110x10-110x10) Wipex swivel union: 1045455 (size G1) 1045456 (size G1 ¼-G1) 1045457 (size G1 ¼) 1045458 (size G2-G1 ¼) 1045459 (size G2) 1045460 (size G3-G2) 1045461 (size G3)

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of Instantor Irish Compression Fittings with brass bodies for use with copper pipe to EN1057. Maximum working pressure 16 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

‘S’ logo on body. Irish Instantor, size, IS/EN1254-2 on nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

310004 Straight Coupler - 1 1/4" 310005 Straight Coupler - 1 1/2" 310006 Straight Coupler - 2" 310042 Reducing Straight Coupler - 1 1/4" X 3/4" 310043 Reducing Straight Coupler - 1 1/4" X 1" 311003 Straight Threaded Coupler - 1" 311004 Straight Threaded Coupler M.I X C - 1 1/4" 311005 Straight Threaded Coupler M.I X C - 1 1/2" 311006 Straight Threaded Coupler M.I X C - 2" 311043 Reducing Straight Threaded Coupler M.I X C - 1 1/4" X 1" 311054 Reducing Straight Threaded Coupler M.I X C - 1 1/2" x" x 1 4 1" 311035 Reducing straight threaded coupler M.I x C 1" x 1 1/2" 311045 Reducing Straight threaded Coupler M.I x C 1 1/4" x 1 1/2" 312004 Straight Threaded coupler F.I x C 1 1/4" 312005 Straight Threaded coupler F.I x C 1 1/2" 312006 Straight Threaded coupler F.I x C 2" 312045 Straight Threaded coupler F.I x C 1 1/4" x 1 1/2" 315004 Elbow CxC 1 1/4" 315005 Elbow CxC 1 1/2" 315006 Elbow CxC 2" 316004 Elbow Threaded M.I 1 1/4" 316005 Elbow Threaded M.I 1 1/2" 316006 Elbow Threaded M.I 2" 317004 Elbow Threaded F.I 1 1/4" 317005 Elbow threaded F.I 1 1/2" 317006 Elbow Threaded F.I 2" 318004 Equal Tee 1 1/4" 318005 Equal Tee 1 1/2" 318006 Equal Tee 2" 318442 Reducing Tee 1 1/4" x 1 1/4" x 3/4" 318443 Reducing Tee 1 1/4" x 1 1/4" x 1" 318553 Reducing Tee 1 1/2" x 1 1/2" x 1" 318554 Reducing Tee 1 1/2" x 1 1/2" X 1 1/4" 310003 Straight Coupler -1" 312003 Straight Threaded coupler F.I x C 1"

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

FLOWTECH range of fusion welded, PP-RCT fittings for use with Atlas PP-RCTGF pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402066

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm – 110mm - FOR INDIVIDUAL SIZE SEE MODEL

Marking:

'FLOWTECH UAE, PN-25, PP-RCT & size on fitting. Modern Plastic Industry, Flowtech & technical information on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Model Code (Size): 90° Elbow FCTE9020 (20mm) FCTE9025 (25mm) FCTE9032 (32mm) FCTE9040 (40mm) FCTE9050 (50mm) FCTE9063 (63mm) FCTE9075 (75mm) FCTE9090 (90mm) FCTE90110 (110mm) 45° Elbow FCTE4520 (20mm) FCTE4525 (25mm) FCTE4532 (32mm) FCTE4540 (40mm) FCTE4550 (50mm) FCTE4563 (63mm) FCTE4575 (75mm) FCTE4590 (90mm) FCTE45110 (110mm) Tee: FCTT20 (20mm) FCTT25 (25mm) FCTT32 (32mm) FCTT40 (40mm) FCTT50 (50mm) FCTT63 (63mm) FCTT75 (75mm) FCTT90 (90mm) FCTT110 (110mm) Socket: FCTS20 (20mm) FCTS25 (25mm) FCTS32 (32mm) FCTS40 (40mm) FCTS50 (50mm) FCTS63 (63mm) FCTS75 (75mm) FCTS90 (90mm) FCTS110 (110mm) End Plug: FCTEC20 (20mm) FCTEC25 (25mm) FCTEC32 (32mm) FCTEC40 (40mm) FCTEC50 (50mm) FCTEC63 (63mm) FCTEC75 (75mm) FCTEC90 (90mm) FCTEC110 (110mm) Reducing Tee: FCTRT20X25X20 (20mm x 25mm x 20mm) FCTRT25X20X20 (25mm x 20mm x 20mm) FCTRT25X20 (25mm x 20mm x 25mm) FCTRT32X20 (32mm x 20mm x 32mm) FCTRT25X32 (32mm x 25mm x 25mm) FCTRT32X25 (32mm x 25mm x 32mm) FCTRT40X20 (40mm x 20mm x 40mm) FCTRT40X25 (40mm x 25mm x 40mm) FCTRT40X32 (40mm x 32mm x 40mm) FCTRT50X20 (50mm x 20mm x 50mm) FCTRT50X25 (50mm x 25mm x 50mm) FCTRT50X32 (50mm x 32mm x 50mm) FCTRT50X40 (50mm x 40mm x 50mm) FCTRT63X20 (63mm x 20mm x 63mm) FCTRT63X25 (63mm x 25mm x 63mm) FCTRT63X32 (63mm x 32mm x 63mm) FCTRT63X40 (63mm x 40mm x 63mm) FCTRT63X50 (63mm x 50mm x 63mm) FCTRT75X32 (75mm x 32mm x 75mm) FCTRT75X40 (75mm x 40mm x 75mm) FCTRT75X50 (75mm x 50mm x 75mm) FCTRT75X63 (75mm x 63mm x 75mm) FCTRT90X40 (90mm x 40mm x 90mm) FCTRT90X50 (90mm x 50mm x 90mm) FCTRT90X63 (90mm x 63mm x 90mm) FCTRT90X75 (90mm x 75mm x 90mm) FCTRT110X63 (110mm x 63mm x 110mm) FCTRT110X75 (110mm x 75mm x 110mm) FCTRT110X90 (110mm x 90mm x 110mm) Reducer: FCTR25X20 (25mm x 20mm FCTR32X20 (32mm x 20mm) FCTR32X25 (32mm x 25mm) FCTR40X20 (40mm x 20mm) FCTR40X25 (40mm x 25mm) FCTR40X32 (40mm x 32mm) FCTR50X20 (50mm x 20mm) FCTR50X25 (50mm x 25mm) FCTR50X32 (50mm x 32mm) FCTR50X40 (50mm x 40mm) FCTR63X20 (63mm x 20mm) FCTR63X25 (63mm x 25mm) FCTR63X32 (63mm x 32mm) FCTR63X40 (63mm x 40mm) FCTR63X50 (63mm x 50mm) FCTR75X40 (75mm x 40mm) FCTR75X50 (75mm x 50mm) FCTR75X63 (75mm x 63mm) FCTR90X50 (90mm x 50mm) FCTR90X63 (90mm x 63mm) FCTR90X75 (90mm x 75mm) FCTR110X63 (110mm x 63mm) FCTR110X75 (110mm x 75mm) FCTR110X90 (110mm x 90mm) End Plug - BSP(M): FCTEP0.5 (1/2" BSP(M)) FCTEP0.75 (3/4" BSP(M)) FCTEP1 (1" BSP(M)) Cross Tee: FCTCT20 (20mm) FCTCT25 (25mm) FCTCT32 (32mm) Union Stub: CTUS20 (20mm) CTUS25 (25mm) CTUS32 (32mm) CTUS40 (40mm) CTUS50 (50mm) CTUS63 (63mm) Pipe Bracket: FCTPB20 (20mm) FCTPB25 (25mm) FCTPB32 (32mm) Cross Over Union: FCTCOS20(20mm) FCTCOS25 (25mm) FCTCOS32 (32mm) Plastic Union: FCTU20 (20mm) FCTU25 (25mm) FCTU32 (32mm) Cross Over Small: FCTCO20 (20mm) FCTCO25 (25mm FCTCO32 £"mm) Flange Stub: FCTST63 (63mm) FCTST75 (75mm) FCTST90 (90mm) FCTST110 (110mm) End Plug: FCTEPL0.5 (1/2'' BSP (M)) FCTEPL0.75 (3/4’' BSP (M)) Female Tee Transition: FCTFT20X0.5 (20mm x 1/2" BSP (F)) FCTFT20X0.75 (20mm x 3/4" BSP (F)) FCTFT25X0.5 (25mm x 1/2" BSP (F)) FCTFT25X0.75 (25mm x 3/4" BSP (F)) FCTFT32X0.5 (32mm x 1/2" BSP (F)) FCTFT32X0.75 32mm x 3/4" BSP (F)) FCTFT32X1 (32mm x 1" BSP (F)) Female Elbow Transition: FCTFE20X0.5 (20mm x 1/2’’ BSP (F)) FCTFE20X0.75 (20mm x 3/4" BSP (F)) FCTFE25X0.5 (25mm x 1/2" BSP (F)) FCTFE25X0.75 (25mm x 3/4" BSP (F)) FCTFE32X0.5 (32mm x 1/2" BSP (F)) FCTFE32X0.75 (32mm x 3/4" BSP (F)) FCTFE32X1 (32mm x 1" BSP (F)) Female Socket Transition: FCTFS20X0.5 (20mm x 1/2’’ BSP (F)) FCTFS20X0.75 (20mm x 3/4" BSP (F)) FCTFS25X0.5 (25mm x 1/2" BSP (F)) FCTFS25X0.75 (25mm x 3/4" BSP (F)) FCTFS32X0.5 (32mm x 1/2" BSP (F)) FCTFS32X0.75 (32mm x 3/4" BSP (F)) Female Hex Socket Transition: FCTFHS32X1 (32mm x 1" BSP (F)) FCTFHS40X1 (40mm x 1’’ BSP (F)) FCTFHS40X1.25 (40mm x 1.1/4’’ BSP (F)) FCTFHS50X1.5 (50mm x 1.1/2’’ BSP (F)) FCTFHS63X2 (63mm x 2’’ BSP (F)) FCTFHS75X2.5 (75mm x 2.1/2’’ BSP (F)) FCTFHS90X3 (90mm x 3’’ BSP (F)) FCTFHS110X4 (110mm x 4’’ BSP (F)) Male Socket Transition: FCTMS20X0.5 (20mm x 1/2’’ BSP (M)) FCTMS20X0.75 (20mm x 3/4" BSP (M)) FCTMS25X0.5 (25mm x 1/2" BSP (M)) FCTMS25X0.75 (25mm x 3/4" BSP (M)) FCTMS32X0.5 (32mm x 1/2" BSP (M)) FCTMS32X0.75 (32mm x 3/4" BSP (M)) Male Hex Socket Transition: FCTMHS32X1 (32mm x 1" BSP (M)) FCTMHS40X1 (40mm x 1’’ BSP (M)) FCTMHS40X1.25 (40mm x 1.1/4’’ BSP (M)) FCTMHS50X1.5 (50mm x 1.1/2’’ BSP (M)) FCTMHS63X2 (63mm x 2’’ BSP (M)) FCTMHS75X2.5 (75mm x 2.1/2’’ BSP (M)) FCTMHS90X3 (90mm x 3’’ BSP (M)) FCTMHS110X4 (110mm x 4’’ BSP (M)) Male Elbow Transition: FCTME20X0.5 (20mm x 1/2’’ BSP (M)) FCTME20X0.75 (20mm x 3/4" BSP (M)) FCTME25X0.5 (25mm x 1/2" BSP (M)) FCTME25X0.75 (25mm x 3/4" BSP (M)) FCTME32X0.5 (32mm x 1/2" BSP (M)) FCTME32X0.75 (32mm x 3/4" BSP (M)) FCTME32X1 (32mm x 1" BSP (M)) Pipe: FCTGF20X2.8 SD7.4 (20mm OD x 2.8mm thickness) FCTGF25X3.5 SD7.4 (25mm OD x 3.5mm thickness) FCTGF32X4.4 SD7.4 (32mm OD x 4.4mm thickness) FCTGF40X5.5 SD7.4 (40mm OD x 5.5mm thickness) FCTGF50X6.9 SD7.4 (50mm OD x 6.9mm thickness) FCTGF63X8.6 SD7.4 (63mm OD x 8.6mm thickness) FCTGF75X10.3 SD7.4 (75mm OD x 10.3mm thickness) FCTGF90X12.3 SD7.4 (90mm OD x 12.3mm thickness) FCTGF110X15.1 SD7.4 (110mm OD x 15.1mm thickness)

Approval Holder:

Modern Plastic Industry LLC

Company Name

Modern Plastic Industry LLC

Address

Dubai Investment Park, PO Box No. 31550, Dubai

Country

United Arab Emirates

View All Listings by this Company

‘GM50xx’ range of stainless steel (SS304 or SS316L) press-fit fittings incorporating EPDM ‘O’-rings for use with *- STPT304 and *- STPT316 stainless steel pipes. The GM5004 prefix models also incorporates an EPDM gasket on the union nut. Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250615009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15 - 108mm. ½” - 3” BSP (M). ½” - 2” BSP (F).

Marking:

Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, WRAS and material grade on fitting body. WRAS, Kasinpress (brand of WENZHOU KASIN VALVE PIPE FITTING CO., LTD), size, material grade, EN10312 and date of manufacture (YYYY/MM) on pipe.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Adapter 90 with female thread: GM5016-1505: 15×Rp½. GM5016-1805: 18×Rp½. GM5016-22075: 22×Rp¾. Adapter with female thread: GM5002-1505: 15×Rp½. GM5002-1805: 18×Rp½. GM5002-22075: 22×Rp¾. GM5002-281: 28×Rp1. GM5002-351025: 35×Rp1¼. GM5002-42105: 42×Rp1½. GM5002-542: 54×Rp2. Bridge with plain ending: GM5035-18: 18. GM5035-22: 22. GM5035-28: 28. Cap: GM5024-15: 15. GM5024-18: 18. GM5024-22: 22. GM5024-28: 28. GM5024-35: 35. GM5024-42: 42. GM5024-54: 54. GM5024-76: 76.1. GM5024-89: 88.9. GM5024-108: 108. Elbow 45 with press ending: GM5008-15: 15. GM5008-18: 18. GM5008-22: 22. GM5008-28: 28. GM5008-35: 35. GM5008-42: 42. GM5008-54: 54. GM5008-76: 76.1. GM5008-89: 88.9. GM5008-108: 108. Elbow 45 with plain ending: GM5009-15: 15. GM5009-18: 18. GM5009-22: 22. GM5009-28: 28. GM5009-35: 35. GM5009-42: 42. GM5009-54: 54. GM5009-76: 76.1. GM5009-89: 88.9. GM5009-108: 108. Elbow 90 with press ending: GM5006-15: 15. GM5006-18: 18. GM5006-22: 22. GM5006-28: 28. GM5006-35: 35. GM5006-42: 42. GM5006-54: 54. GM5006-76: 76.1. GM5006-89: 88.9. GM5006-108 -108. Elbow 90 with female thread: GM5021-1505: 15×Rp½. GM5021-1805: 18×Rp½. GM5021-22075: 22×Rp¾. GM5021-281: 28×Rp1. GM5021-351024: 35×Rp1¼. GM5021-42105: 42×Rp1½. GM5021-542: 54×Rp2. Elbow: 90 with: male thread: GM5010-1505: 15×R½. GM5010-1805: 18×R½. GM5010-22075: 22×R¾ Elbow 90 with plain ending: GM5007-15: 15. GM5007-18: 18. GM5007-22: 22. GM5007-28: 28. GM5007-35: 35. GM5007-42: 42. GM5007-54: 54. GM5007-76: 76.1. GM5007-89: 88.9. GM5007-108: 108. Reducer coupling with plain ending: GM5005-1815: 18×15. GM5005-2218: 22×18. GM5005-2818: 28×18. GM5005-3522: 35×22. GM5005-3528: 35×28. GM5005-4222: 42×22. GM5005-4228: 42×28. GM5005-4235: 42×35. GM5005-5428: 54×28. GM5005-5435: 54×35. GM5005-5442: 54×42. Reducer coupling with press ending: GM5011-1815: 18×15. GM5011-2215: 22×15. GM5011-2218: 22×18. GM5011-2815: 28×15. GM5011-2818: 28×18. GM5011-2822: 28×22. GM5011-3515: 35×15. GM5011-3518: 35×18. GM5011-3522: 35×22. GM5011-3528: 35×28. GM5011-4215: 42×15. GM5011-4218: 42×18. GM5011-4222: 42×22. GM5011-4228: 42×28. GM5011-4235: 42×35. GM5011-5415: 54×15. GM5011-5418: 54×18. GM5011-5422: 54×22. GM5011-5428: 54×28. GM5011-5435: 54×35. GM5011-5442: 54×42. GM5011-6735: 67×35. GM5011-6754: 67×54. GM5011-7654: 76×54. GM5011-8954: 89×54. GM5011-8976: 89×76. GM5011-10854: 108×54. GM5011-10876: 108×76. GM5011-10889: 108×89. Reducer Tee with press ending: GM5015-1815: 18×15×18. GM5015-2215: 22×15×22. GM5015-2218: 22×18×22. GM5015-2815: 28×15×28. GM5015-2818: 28×18×28. GM5015-2822: 28×22×28. GM5015-3522: 35×22×35. GM5015-3528: 35×28×35. GM5015-4222: 42×22×42. GM5015-4228: 42×28×42. GM5015-4235: 42×35×42. GM5015-5422: 54×22×54. GM5015-5428: 54×28×54. GM5015-5435: 54×35×54. GM5015-5442: 54×42×54. GM5015-7642: 76.1×42×76.1. GM5015-7654: 76.1×54×76.1. GM5015-8954: 88.9×54×88.9 GM5015-10854: 108×54×108. GM5015-10876: 108×76.1×108. GM5015-10889: 108×88.9×108 Equal coupling with press ending: GM5001-15: 15. GM5001-18: 18. GM5001-22: 22 GM5001-28: 28. GM5001-35: 35. GM5001-42: 42. GM5001-54: 54. GM5001-76: 76.1. GM5001-89: 88.9. GM5001-108: 108 Adapter with male thread: GM5003-1505: 15×R½. GM5003-1805: 18×R½. GM5003-18075: 18×R¾. GM5003-2205: 22×R½. GM5003-22075: 22×R¾. GM5003-281: 28×R1. GM5003-351025: 35×R1¼. GM5003-42105: 42×R1½. GM5003-542: 54×R2. GM5003-76205: 76.1×R2½. GM5003-893: 88.9×R3. Slip coupling with press ending: GM5019-15: 15. GM5019-18: 18. GM5019-22: 22. GM5019-28: 28. GM5019-35: 35. GM5019-42: 42 GM5019-54: 54. Tee with press ending: GM5012-15: 15. GM5012-18: 18. GM5012-22: 22. GM5012-28: 28. GM5012-35: 35. GM5012-42: 42. GM5012-54: 54. GM5012-76: 76.1. GM5012-89: 88.9. GM5012-108: 108. Tee with male thread: GM5013-1505: 15×R½. GM5013-1805: 18×R½. GM5013-2205: 22×R½. GM5013-22075: 22×R¾. GM5013-2805: 28×R½. GM5013-28075: 28×R¾. GM5013-281: 28×R1. GM5013-3505: 35×R½. GM5013-351025: 35×R1¼. GM5013-421025: 42×R1¼. GM5013-54105: 54×R1½. GM5013-542: 54×R2. Tee with female thread:: GM5014-1505: 15×Rp½. GM5014-1805: 18×Rp½. GM5014-2205: 22×Rp½. GM5014-22075: 22×Rp¾. GM5014-2805: 28×R½. GM5014-28075: 28×Rp¾. GM5014-281: 28×Rp1. GM5014-3505: 35×Rp½. GM5014-351025: 35×Rp1¼. GM5014-421025: 42×Rp1¼. GM5014-54105: 54×1½. GM5014-542: 54×Rp2. Adaptor with union nut: GM5004-1505: 15×G½. GM5004-1805: 18×G½. GM5004-18075: 18×G¾. GM5004-2205: 22×G½. GM5004-22075: 22×G¾. GM5004-221: 22×G1. GM5004-281: 28×G1. GM5004-351025: 35×G1¼. GM5004-421075: 42×G1¾. GM5004-542: 54×G2. Stainless steel pipe (SS304 or SS316L): *- STPT304 (SS304). *- STPT316L (SS316L). Where * = size in mm between 15 and 108 (in whole numbers: 15, 18, 22, 28, 35, 42, 54, 67, 76/76.1, 88.9/89, 108).

Product Images

Approval Holder:

WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Company Name

WENZHOU KASIN VALVE PIPE FITTING CO., LTD

Address

NO.2‐1802 Caizhi Building, No. 88, Binhang Road, Yongzhong Sub‐District, Longwan District, Wenzhou, Zhejiang

Country

China

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208824

Size:

See model

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

LF12015 CORE 15mm 90° Elbow Solder Ring LF12022 CORE 22mm 90° Elbow Solder Ring LF12028 CORE 28mm 90° Elbow Solder Ring LF12035 CORE 35mm 90° Elbow Solder Ring LF12042 CORE 42mm 90° Elbow Solder Ring LF12054 CORE 54mm 90° Elbow Solder Ring LF12S015 CORE 15mm 90° Street Elbow Solder Ring LF1015 CORE 15mm Coupler Solder Ring LF1022 CORE 22mm Coupler Solder Ring LF1028 CORE 28mm Coupler Solder Ring LF1035 CORE 35mm Coupler Solder Ring LF1042 CORE 42mm Coupler Solder Ring LF1054 CORE 54mm Coupler Solder Ring LF6022015 CORE 22mm X 15mm Fitting Reducer Solder Ring LF24015 CORE 15mm Equal Tee Solder Ring LF24022 CORE 22mm Equal Tee Solder Ring LF24028 CORE 28mm Equal Tee Solder Ring LF24035 CORE 35mm Equal Tee Solder Ring LF24042 CORE 42mm Equal Tee Solder Ring LF24054 CORE 54mm Equal Tee Solder Ring LF25022015 CORE 22mm X 22mm X 15mm Reducer Tee Solder Ring

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company