Directory Search Results

Print List

#250604026

Range of deck mounted, two hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating ceramic disc headwork (GE08) or non rising spindle headwork (CR26) with single lever and cross top operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250604026
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)
Marking:
DEVA, DTC 59 on rear body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
GE08 GE08/501 (GOLD) CR26 CR26/501 (GOLD)

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#250312007

Wall mounted thermostatic blending valve (brass body, various finishes - see model) incorporating a 2-way ceramic disc headwork with a single lever operating member controlling and diverting the flow between the spout outlet or the shower outlet. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 16.0 bar. Maximum operating temperature 75°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
250312007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
This approval does not include a shower hose and handset.
Size:
15mm compression.
Marking:
SONAS on body.
Installation Requirements:
R001 R020
Expiry date:
31/03/2030
Proviso:
This approval does not include a shower hose and handset.
Model:
USH0216 (Chrome), USH0217 (Matt black), USH0218 (Brushed or Satin stainless steel). Model added August 2025: USH0234 (Brushed Gold)
Product Images

Approval Holder:
Sonas Bathrooms
Company Name
Sonas Bathrooms
Address
103 Northwest Business Park Ballycoolin, Dublin 15
Postcode
D15 R88
Country
Ireland

View All Listings by this Company

Print This Approval


#2304379

Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies) incorporating quarter turn ceramic disc headworks with lever type operating members and a manually operated diverter to the shower outlet. The spout outlets incorporate plastic flow straighteners. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2304379
Size:
¾” BSP (M)
Marking:
nabis on operating member and handset.
Installation Requirements:
R001 R005 R020
Expiry date:
30/04/2028
Model:
A05674 Nabis Swish A05675 Nabis Swish

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#250614301

Section:
0520 Combination Tap Assemblies
Description:
A Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
Deck Mounted Capable of achieving AUK2 Tap Gap
Installation Requirements:
R001 R005 R010 R040
Expiry date:
30/06/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
M5005 X XXXVARIOUS3/4" BSP10.0 bar65 °CPPIREAR OF BODYNo1/4 Turn ceramic diskMetal BacknutsOpen OutletShower Hose, Handset,

Notes & Further Information

X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:
PPI XIAMEN INDUSTRY CO LTD

Print This Approval


#250602041

Range of wall mounted, two-hole, single outlet (fixed) bath/shower mixers, (brass bodies – various finishes). Incorporating a thermostatic cartridge controlling the temperature and a manual diverter controlling the flow between the outlets with dome type operating members. The spout outlet incorporates a plastic aerator. Both inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
250602041
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP (M) offset union
Marking:
Villeroy & Boch logo on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
TVS000035000XX Universal TVS108016000XX Embrace XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel)

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#2206385

Two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2206385
Size:
1/2” BSP (M)
Marking:
WIX on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2027
Model:
"Modena" 410715

Approval Holder:
Wickes PLC
Company Name
Wickes PLC
Address
Vision House, Colonial Way, Watford.
Postcode
WD24 4JL
Country
United Kingdom
Phone
01923 656600
General Email
Steven.ferry@wickes.co.uk

View All Listings by this Company

Print This Approval


#250602029

Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes). The products Incorporate either a non-rising spindle (model 1641 only) or quarter turn ceramic disc headworks (all other models) with either cross top (model 1641 only) or single lever (all other models) operating members. The spout outlet incorporates a plastic aerator. The products are supplied with a a pop-up waste not verified by test. Maximum working pressure 3.0 Bar Maximum operating temperature 65.0°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250602029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Drummonds logo on underside of spout (model 1681 only) Drummonds logo on side valve operating member (all other models)
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2030
Model:
DAD1641*UK The Mull Classic 3 Hole Basin Mixer Swan Spout DAD1642*UK The Coll 3 Hole Basin Mixer Swan Spout DAD1642*MUK The Coll 3 Hole Basin Mixer Swan Spout DAD1643*UK The Coll 3 Hole Basin Mixer Swan Spout DAD1681* The Leawood Lever 3 Hole Basin Mixer Where * denotes the finish, and can be replaced with any of the following: B – Unlacquered Brass, C – Chrome, N – Nickel, Q – Brushed Nickel, V – Antique Brushed Brass, W – Antique Nickel, X – Brushed Brass, Y – Antique Bronze, Z - Antique Brass

Approval Holder:
Drummonds Bathrooms Ltd
Company Name
Drummonds Bathrooms Ltd
Address
Unit 2c Henley Business Park Pirbright Road Normandy Surrey
Postcode
GU3 2DX
Country
United Kingdom
General Email
nick@drummonds-uk.com

View All Listings by this Company

Print This Approval


#250602030

Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes). The products incorporate either a non-rising spindle (model 1851 only) or quarter turn ceramic disc (model 1850 only) headworks with either cross top (model 1851 only) or single lever (model 1850 only) operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts and lever operated pop-up wastes. Maximum working pressure 3.0 Bar Maximum operating temperature 65.0°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250602030
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Drummonds logo on underside of spout
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
DAD1850* The Bestwood Lever 3 Hole Basin Mixer DAD1851* The Bestwood X Head 3 Hole Basin Mixer Where * denotes the finish, and can be replaced with any of the following: B – Unlacquered Brass, C – Chrome, N – Nickel, Q – Brushed Nickel, V – Antique Brushed Brass, W – Antique Nickel, X – Brushed Brass, Y – Antique Bronze, Z - Antique Brass

Approval Holder:
Drummonds Bathrooms Ltd
Company Name
Drummonds Bathrooms Ltd
Address
Unit 2c Henley Business Park Pirbright Road Normandy Surrey
Postcode
GU3 2DX
Country
United Kingdom
General Email
nick@drummonds-uk.com

View All Listings by this Company

Print This Approval


#250602044

Range of three hole, metal, single outlet (fixed) combination tap assemblies (brass bodies - various finishes). Incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250602044
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 1/2" BSP captive nut end connections.
Marking:
Saneux logo on spout
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2030
Model:
CO303 CO303.BB CO303.BN CO303.SB CO303.BR CO303.K CO303.KBB CO303.KBN CO303.KSB CO303.KBR CO303.F CO303.FBB CO303.FBN CO303.FSB CO303.FBR For CO303 / CO303.BB / CO303.BN / CO303.SB / CO303.BR or CO303.K / CO303.KBB / CO303.KBN / CO303.KSB / CO303.KBR or CO303.F / CO303.FBB / CO303.FBN / CO303.FSB / CO303.FBR, the only difference is finish; The only difference between CO303 series, CO303.K series and CO303.F series is different handle style. CO303 series are with CLASSIC handle, CO303.K series are with KNURLED handle, and CO303.F are with FLUTED handle. No suffix means Chrome, BB means Brushed Brass (PVD) , BN means Brushed Nickel (PVD) , SB means Satin Black (PVD) , BR means Brushed Bronze (PVD).

Approval Holder:
Saneux (EU) Ltd
Company Name
Saneux (EU) Ltd
Address
Iain Stewart Centre Beehive Ring Road Gatwick
Postcode
RH6 OPB
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250604021

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies (DZR brass main body - various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250604021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½ “ BSP (M).
Marking:
Axor on the spout.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
16 532 xx0 AXOR Montreux 3-hole basin mixer for concealed installation wall-mounted with spout 165 - 225 mm and cross handles 16 534 xx0 AXOR Montreux 3-hole basin mixer for concealed installation wall-mounted with spout 165 - 225 mm and lever handles 39 143 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 222 mm, cross handles and escutcheons 39 144 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 226 mm, cross handles and plate 39 147 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 222 mm, lever handles and escutcheons 39 148 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 226 mm, lever handles and plate 39 313 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 162 mm, cross handles and escutcheons 39 315 xx0 AXOR Citterio 3-hole basin mixer for concealed installation wall-mounted with spout 162 mm, lever handles and escutcheons Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 784 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.