'Deep Seal'. Factory applied, red-brown coloured (once mixed and applied), two-part polyurethane coating. Mix, apply and cure (full cure of 7 days@30°C) as per manufacturer's instructions ref. 'DI/PU/2022/072', dated 25/04/2022. For use with water up to 35°C.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2206527

Expiry date:

30/06/2027

Approval Holder:

Deep Industries

Company Name

Deep Industries

Address

Plot Number 264, GIDC-II, Dediyasan, Mehsana - 384002, Gujurat

Country

India

View All Listings by this Company

'Resichem 507 DWPU Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDS507DWPU.rv4.09062022'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205552

Expiry date:

31/05/2027

Approval Holder:

Resimac Ltd.

Company Name

Resimac Ltd.

Address

Unit B, Park Barn Estate, Station Road, Topcliffe, Thirsk

Postcode

YO7 3SE

View All Listings by this Company

'TPU inner hose (YOUSHI/3017)'. Transparent, colourless, extruded TPU hose. For use with water up to 85°C.

Section:

5140 Hoses & Tubing

Expiry date:

31/05/2027

Approval Holder:

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Company Name

Youshi (Xiamen) Sanitary Ware Industrial Co., Ltd.

Address

41th Building, No.1777 Jilong Road, Tongan Industrial Zone (Huli), Xiamen, Fujian, 361100

Country

China

View All Listings by this Company

'Ferrimax 30'. Grey coloured, sintered Strontium Ferrite magnet. For use with water up to 70°C.

Section:

5165 Magnetic Material

Expiry date:

31/10/2027

Approval Holder:

MPI Magneti Permanenti Industriali Srl.

Company Name

MPI Magneti Permanenti Industriali Srl.

Address

Via G.B. Vico 25/B, 20010 Cornaredo (Milano), Italy

View All Listings by this Company

'RADILON® A RV300RKC 306 BK' (black coloured). In December 2022, 'RADILON A RV300RKC 106 NT' (natural, appears off-white) was added to the approval. Injection moulded PA66-GF30 materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2203538

Expiry date:

31/03/2027

Approval Holder:

RADICI Plastics Suzhou Co., Ltd.

Company Name

RADICI Plastics Suzhou Co., Ltd.

Address

No.49 Ping Sheng Road Sheng Pu Town Suzhou Industrial Park

Country

215126

Phone

+86 21 6438 9211

View All Listings by this Company