Spring loaded resilient trim check valve cartridge with plastic body and EPDM ‘O’-rings. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0026 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

250404703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15

Marking:

Watts logo & DN15 on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

149B040135 Type TK model IO

Approval Holder:

Socla SAS

Company Name

Socla SAS

Address

365, Rue du Lt Putier, 71530 Virey Le Grand, France

Phone

+33 3 85 97 42 42

View All Listings by this Company

Manufacturer:

Socla SAS

Company Name

Socla SAS

Address

365, Rue du Lt Putier, 71530 Virey Le Grand, France

Phone

+33 3 85 97 42 42

View All Listings by this Company

Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies models AI-903215 & Al-903222 are chrome plated. Maximum working pressure 16 Bar Maximum operating temperature 60°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250302709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

AI-903215, AI-903222 Airaga logo, CR, eco fil & flow arrow on body. Size on nut. AI-903020: Altecnic logo, flow arrow, size, pressure & CR on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

AI-903215 (15mm compression inlet/outlet) AI-903222 (22mm compression inlet/outlet) AI-903020 (¾” BSP (F) inlet/outlet)

Product Images

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:

0060 Boilers

Section Subtitle:

Catering, Feed Cistern or Pressure.

WRAS Approval Number:

2304108

Size:

Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.

Marking:

CAPLE (Brand of Maurice Lay Distributors Ltd) , WRAS and product info on adhesive label on body.

Installation Requirements:

R001 R009 R170 R040

Expiry date:

30/04/2028

Model:

BOILER3

Approval Holder:

Maurice Lay Distributors Ltd

Company Name

Maurice Lay Distributors Ltd

Address

Fourth Way Avonmouth Bristol

Postcode

BS11 8DW

Phone

0117 938 1900

General Email

info@caple.co.uk

View All Listings by this Company

Range of single hole, single outlet fixed (over the rim swivel nozzle) bidet combination tap assemblies stainless steel or brass bodies with various finishes, incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates a swivel nozzle with a plastic aerator. The products are also supplied with a lever type pop-up waste. Maximum working pressure 3.0 Bar Maximum operating temperature 60.0°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.

WRAS Approval Number:

250402006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined flexible hose assemblies with a 3/8" BSP (F) captive nut end connections.

Marking:

VOLA on Operating Member

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/04/2030

Model:

VOLA HV4-XX Model VOLA HV4-XX made in Brass or Stainless-steel material are available with the different surface finish. Suffix “XX” indicate the number of surface and denotes: For Brass Versions: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 59=Brushed Natural Brass, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Nickel, B61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. For Stainless Steel Versions: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

View All Listings by this Company

Range of either half turn, quarter turn ceramic disc or non-rising spindle headworks with brass bodies and EPDM ‘O’ rings. For insertion into specifically dimensioned bores. Maximum working pressure 20.0 Bar Maximum operating temperature 90.0°C

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

250402028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

Zhunai logo and model on body

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Ceramic Disc Headworks SL15T90 –½” BSP M SL15T90-1-705 –½” BSP M SL15T180 –½” BSP M SL15TA90 –½” BSP M SL15TA180 –½” BSP M SL20T90 -3/4” BSP M SL20T180 -3/4” BSP M SL20TA90 -3/4” BSP M SL20TA180 –½” BSP M Non-Rising Spindles SL15TALX-1 –½” BSP M SL15TALX-2 -3/4” BSP M SL15TLX-1 –½” BSP M SL20TALX-1 -3/4” BSP M

Manufacturer:

Zhuhai Mingshi Hardware Manufacturing Co.,Ltd

Company Name

Zhuhai Mingshi Hardware Manufacturing Co.,Ltd

Address

No.15,gold coast avenue,sanzao town, jinwan district,zhuhai,china

View All Listings by this Company