Directory Search Results

Print List

#2107803

Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2107803
Size:
See model
Marking:
FQR, year of manufacture (YY) DN & WRAS on ferrule.
Installation Requirements:
R001
Expiry date:
31/07/2026
Model:
DN6 – DN6W, P6W series: 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN8 – DN8W, P9W series: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN10 – DN10W series: 12x1, F3/8”, F1/2”, F¾”, M3/8”, M1/2”, NPB15, 15c.o, F1/2” c/curva, FC1/2” DN13 – DN13W series: F1/2” F¾”, M1/2”, M3/4, F1/2” c/curva

Approval Holder:
F.Q.R. Frattini S.R.L.
Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company
Manufacturer:
F.Q.R. Frattini S.R.L.
Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

Print This Approval


#2103028

Elite ranges of Direct, Indirect, Solar Single, Solar Twin, Slim Direct and Slim Indirect stainless steel insulated unvented hot water storage cylinders with external expansion. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:
1890 Unvented Heating Apparatus
WRAS Approval Number:
2103028
Note:
Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
Size:
22mm compression (Inlet Manifold)
Marking:
UK CYLINDERS ELITE on front, technical information on adhesive label on body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2026
Proviso:
All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°c and 45°c.
Model:
ESDIR0090 – UK CYLINDERS ELITE 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESDIR0120 – UK CYLINDERS ELITE 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESDIR0150 – UK CYLINDERS ELITE 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESDIR0170 – UK CYLINDERS ELITE 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESDIR0200 – UK CYLINDERS ELITE 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESDIR0250 – UK CYLINDERS ELITE 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESDIR0300 – UK CYLINDERS ELITE 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. ESIND0090-UK CYLINDERS ELITE 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESIND0120-UK CYLINDERS ELITE 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESIND0150-UK CYLINDERS ELITE 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. ESIND0170-UK CYLINDERS ELITE 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESIND0200-UK CYLINDERS ELITE 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESIND0250-UK CYLINDERS ELITE 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. ESIND0300-UK CYLINDERS ELITE 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESSDI0170-UK CYLINDERS ELITE 170 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER ESSDI0200-UK CYLINDERS ELITE 200 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER ESSDI0250-UK CYLINDERS ELITE 250 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER ESSDI0300-UK CYLINDERS ELITE 300 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER ESSIN0170-UK CYLINDERS ELITE 170 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER ESSIN0200-UK CYLINDERS ELITE 200 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER. ESSIN0250-UK CYLINDERS ELITE 250 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER ESSIN0300-UK CYLINDERS ELITE 300 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER. ESNDI0060-UK CYLINDERS ELITE SLIM 60 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNDI0090-UK CYLINDERS ELITE SLIM 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNDI0120-UK CYLINDERS ELITE SLIM 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNDI0150-UK CYLINDERS ELITE SLIM 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNDI0170-UK CYLINDERS ELITE SLIM 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNDI0200-UK CYLINDERS ELITE SLIM 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNIN0060-UK CYLINDERS ELITE SLIM 60 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNIN0090-UK CYLINDERS ELITE SLIM 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNIN0120-UK CYLINDERS ELITE SLIM 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNIN0150-UK CYLINDERS ELITE SLIM 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNIN0170-UK CYLINDERS ELITE SLIM 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER ESNIN0200-UK CYLINDERS ELITE SLIM 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:
UK CYLINDERS LTD
Company Name
UK CYLINDERS LTD
Address
UNIT 3 RCM BUSINESS CENTRE WEST YORKSHIRE
Postcode
WF5 9ND

View All Listings by this Company

Print This Approval


#2103029

Flowcyl ranges of Direct, Indirect, Solar Single, Solar Twin, Slim Direct and Slim Indirect stainless steel insulated unvented hot water storage cylinders with external expansion. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:
1890 Unvented Heating Apparatus
WRAS Approval Number:
2103029
Note:
Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
Size:
22mm compression (Inlet Manifold)
Marking:
UK CYLINDERS FLOWCYL on front, technical information on adhesive label on body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2026
Proviso:
All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°c and 45°c.
Model:
FCDIR0090-UK CYLINDERS FLOWCYL 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCDIR0120 – UK CYLINDERS FLOWCYL 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCDIR0150 – UK CYLINDERS FLOWCYL 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCDIR0170 – UK CYLINDERS FLOWCYL 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCDIR0200 – UK CYLINDERS FLOWCYL 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCDIR0250 – UK CYLINDERS FLOWCYL 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCDIR0300 – UK CYLINDERS FLOWCYL 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. FCIND0090-UK CYLINDERS FLOWCYL 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCIND0120-UK CYLINDERS FLOWCYL 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCIND0150-UK CYLINDERS FLOWCYL 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. FCIND0170-UK CYLINDERS FLOWCYL 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCIND0200-UK CYLINDERS FLOWCYL 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCIND0250-UK CYLINDERS FLOWCYL 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. FCIND0300-UK CYLINDERS FLOWCYL 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCSDI0170-UK CYLINDERS FLOWCYL 170 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER FCSDI0200-UK CYLINDERS FLOWCYL 200 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER FCSDI0250-UK CYLINDERS FLOWCYL 250 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER FCSDI0300-UK CYLINDERS FLOWCYL 300 INDIRECT SOLAR SINGLE COIL UNVENTED HOT WATER STORAGE CYLINDER FCSIN0170-UK CYLINDERS FLOWCYL 170 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER FCSIN0200-UK CYLINDERS FLOWCYL 200 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER. FCSIN0250-UK CYLINDERS FLOWCYL 250 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER FCSIN0300-UK CYLINDERS FLOWCYL 300 INDIRECT SOLAR TWIN COIL UNVENTED HOT WATER STORAGE CYLINDER. FCNDI0060-UK CYLINDERS FLOWCYL SLIM 60 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNDI0090-UK CYLINDERS FLOWCYL SLIM 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNDI0120-UK CYLINDERS FLOWCYL SLIM 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNDI0150-UK CYLINDERS FLOWCYL SLIM 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNDI0170-UK CYLINDERS FLOWCYL SLIM 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNDI0200-UK CYLINDERS FLOWCYL SLIM 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNIN0060-UK CYLINDERS FLOWCYL SLIM 60 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNIN0090-UK CYLINDERS FLOWCYL SLIM 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNIN0120-UK CYLINDERS FLOWCYL SLIM 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNIN0150-UK CYLINDERS FLOWCYL SLIM 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNIN0170-UK CYLINDERS FLOWCYL SLIM 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER FCNIN0200-UK CYLINDERS FLOWCYL SLIM 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:
UK CYLINDERS LTD
Company Name
UK CYLINDERS LTD
Address
UNIT 3 RCM BUSINESS CENTRE WEST YORKSHIRE
Postcode
WF5 9ND

View All Listings by this Company

Print This Approval


#2103031

Nucyl ranges of Direct & Indirect stainless steel insulated unvented hot water storage cylinders with external expansion. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:
1890 Unvented Heating Apparatus
WRAS Approval Number:
2103031
Note:
Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
Size:
22mm compression (Inlet Manifold)
Marking:
UK CYLINDERS NUCYL on front, technical information on adhesive label on body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2026
Proviso:
All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°c and 45°c.
Model:
WWA90D -WHITEWOLF ALPHA 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0090-UK CYLINDERS NUCYL 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA120D -WHITEWOLF ALPHA 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0120 – UK CYLINDERS NUCYL 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA150D -WHITEWOLF ALPHA 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0150 – UK CYLINDERS NUCYL 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA170D -WHITEWOLF ALPHA 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0170 – UK CYLINDERS NUCYL 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA200D -WHITEWOLF ALPHA 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0200 – UK CYLINDERS NUCYL 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA250D -WHITEWOLF ALPHA 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FNUIR0250 – UK CYLINDERS NUCYL 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA300D -WHITEWOLF ALPHA 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. NUDIR0300 – UK CYLINDERS NUCYL 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. WWA90I -WHITEWOLF ALPHA 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0090-UK CYLINDERS NUCYL 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA120I -WHITEWOLF ALPHA 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0120-UK CYLINDERS NUCYL 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA150I-WHITEWOLF ALPHA 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. NUIND0150-UK CYLINDERS NUCYL 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. WWA170I-WHITEWOLF ALPHA 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0170-UK CYLINDERS NUCYL 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA200IWHITEWOLF ALPHA 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0200-UK CYLINDERS NUCYL 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA250I-WHITEWOLF ALPHA 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. NUIND0250-UK CYLINDERS NUCYL 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. WWA300I-WHITEWOLF ALPHA 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0300-UK CYLINDERS NUCYL 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:
UK CYLINDERS LTD
Company Name
UK CYLINDERS LTD
Address
UNIT 3 RCM BUSINESS CENTRE WEST YORKSHIRE
Postcode
WF5 9ND

View All Listings by this Company

Print This Approval


#2104314

Range of free standing direct gas fired unvented cyliners with a enamel coating internal lining and magnesium sacrificial anode. Fitted with a combined temperature and pressure relief valve set at 7 bar. Maximum working pressure 6.5 bar. Maximum operating temperature 80°C.

Section:
1890 Unvented Heating Apparatus
Size:
1” BSP(M) x 1”BSP(M)
Marking:
Therm’inova, serial no, gas type, capacity and other techcnial information on body.
Installation Requirements:
R001 R140
Expiry date:
30/04/2026
Model:
COE / NHREC 18 kW (G20/G25/G31) COE / NHREC 36 kW (G20/G25/G31) COE / NHREC 60 kW (G20/G25/G31) AEALN / NHREX 18 kW (G20/G25/G31) AEALN / NHREX 26 kW (G20/G25/G31) AEALN / NHREX 36 kW (G20/G25/G31) AEALN / NHREX 60 kW (G20/G25/G31) The AEALN / NHREX family of product has straight exhaust that goes from the burner through the tank up to the top of the water heater The COE family of product has a corkscrew exhaust that goes through the tank and exit at the base of the water heater Each water heater through specific setting can be used with 3 different type of gas: - G 20 = Methane - G 25 = Town Gas - G31 = Propane (LPG)
Product Images

Approval Holder:
Therm'inova
Company Name
Therm'inova
Address
1 Rue Des Bornes 27140 Gisors
Country
France
Phone
+33 (0)2 32 27 85 08
General Email
be@therm-inova.com

View All Listings by this Company
Manufacturer:
Therm'inova
Company Name
Therm'inova
Address
1 Rue Des Bornes 27140 Gisors
Country
France
Phone
+33 (0)2 32 27 85 08
General Email
be@therm-inova.com

View All Listings by this Company

Print This Approval


#2106034

Range of “POWERflow” Indirect and direct unvented storage cylinders consisting of factory fitted single or twin coil circuit with either a primary or solar coil. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 4.5 bar at 90˚C and an expansion relief valve set at 3.5 bar. The product is supplied with a pressure reducing valve set at 2.1 bar, expansion vessel, tundish and an approved check assembly (suitable for backflow protection against Fluid Category 2). Primary circuit max working pressure: 3.5 bar Secondary circuit max working pressure: 3.0 bar Solar Coil max working pressure: 3.5 bar Primary and Secondary circuit maximum operating temperature 75.0°C Solar Coil max operating temperature 80.0°C

Section:
1890 Unvented Heating Apparatus
WRAS Approval Number:
2106034
Note:
Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
Size:
Primary Circuit: 22mm compression. Secondary circuit: 22mm compression. Solar circuit: 22mm compression. Drain connection: 15mm compression.
Marking:
McDonald Water Storage, POWERflow and other product info on labels on body.
Installation Requirements:
R001 R140 R360
Expiry date:
30/06/2026
Proviso:
All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°C and 45°C.
Model:
POWERflow Range of unvented hot water storage cylinders: 75, 120, 150, 165, 180, 210, 250, 300 Litres Indirect & Direct. Solar Coil option on 120L and above. PD1 - 75 Litre Direct POWERflow, PI1 - 75 Litre Indirect POWERflow Size = 950 x 450mm Connections = 6 (Direct) / 9 (Indirect) PD2 - 120 Litre Direct POWERflow, PI2 - 120 Litre Indirect POWERflow Size = 950 x 550mm Connections = 6 (Direct) / 9 (Indirect) PD3 - 150 Litre Direct POWERflow, PI3 - 150 Litre Indirect POWERflow Size = 1150 x 550mm Connections = 7 (Direct) / 9 (Indirect) PD5 - 165 Litre Direct POWERflow, PI5 - 165 Litre Indirect POWERflow Size = 1250 x 550mm Connections = 7 (Direct) / 9 (Indirect) PD6 - 180 Litre Direct POWERflow, PI6 - 180 Litre Indirect POWERflow Size = 1350 x 550mm Connections = 8 (Direct) / 10 (Indirect) PD4 - 210 Litre Direct POWERflow, PI4 - 210 Litre Indirect POWERflow Size = 1550 x 550mm Connections = 8 (Direct) / 10 (Indirect) PD7 - 250 Litre Direct POWERflow, PI7 - 250 Litre Indirect POWERflow Size = 1550 x 600mm Connections = 8 (Direct) / 10 (Indirect) PD8 - 300 Litre Direct POWERflow, PI8 - 300 Litre Indirect POWERflow Size = 1850 x 600mm Connections = 8 (Direct) / 10 (Indirect)
Product Images

Approval Holder:
McDonald Water Storage
Company Name
McDonald Water Storage
Address
Queensway Industrial Estate Glenrothes Fife
Postcode
KY7 5QF
Country
United Kingdom
General Email
scott@mcdonaldwaterstorage.com

View All Listings by this Company
Manufacturer:
McDonald Water Storage
Company Name
McDonald Water Storage
Address
Queensway Industrial Estate Glenrothes Fife
Postcode
KY7 5QF
Country
United Kingdom
General Email
scott@mcdonaldwaterstorage.com

View All Listings by this Company

Print This Approval


#2104018

Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104018
Note:
Fittings in this section are suitable for above ground installations only.
Size:
See model.
Marking:
TT Flow Valves (division of TT Pumps Ltd.), DN, PN, model and year of manufacture (YYYY) on data plate. Size and year of manufacture (YYYY) on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
Aquabrake(R) range of air valves: Double orifice Aquabrake(R) 3F 1” & 2” BSP female inlet. Aquabrake(R) 3F DN50 - DN200. Double orifice with anti-surge Aquabrake(R) 3F AS 1” & 2” BSP female inlet Aquabrake(R) 3F AS DN50 - DN200. Double orifice with rapid fill protection Aquabrake(R) 3F RFP 1 & 2” BSP female inlet Aquabrake(R) 3F RFP DN50 - DN200.

Approval Holder:
T-T Pumps Limited
Company Name
T-T Pumps Limited
Address
Newcastle Road, Woore, Cheshire.
Postcode
CW3 9RU.
Phone
(01630) 647 200

View All Listings by this Company
Manufacturer:
T-T Pumps Limited
Company Name
T-T Pumps Limited
Address
Newcastle Road, Woore, Cheshire.
Postcode
CW3 9RU.
Phone
(01630) 647 200

View All Listings by this Company

Print This Approval


#2104031

Range of air venting valves with a blue epoxy coated ductile iron body and carbon steel cover, NBR ‘O’-rings and EPDM seals. Maximum working pressure 10.0 bar or 16.0 bar (see model). Maximum operating temperature 65°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104031
Note:
Fittings in this section are suitable for above ground installations only.
Size:
DN50 to DN300 flanged inlet/outlet
Marking:
OZ-KAN, PN, DN and EN on body. OZ-KAN, DN, PN and date of manufacture (YYYY) on data plate on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
10.0 bar models: DDV01501A1101SST (DN 150). DDV02001A1101SST (DN 200). DDV02501A1101SST (DN 250). DDV03001A1101SST (DN 300). 16.0 bar models: DDV00502A1201SST (DN 0050). DDV00652A1201SST (DN 0065). DDV00802A1201SST (DN 0080). DDV01002A1201SST (DN 0100). DDV01252A1201SST (DN 0125). DDV01502A1201SST (DN 0150). DDV02002A1201SST (DN 0200). DDV02502A1201SST (DN 0250). DDV03002A1201SST (DN 0300).

Approval Holder:
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Company Name
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Address
10032 Sokak, No:27 Atatürk O.S.B. Çiğli İzmir
Postcode
35620
Country
Turkey
General Email
btuzun@oz-kan.com.tr

View All Listings by this Company
Manufacturer:
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Company Name
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Address
10032 Sokak, No:27 Atatürk O.S.B. Çiğli İzmir
Postcode
35620
Country
Turkey
General Email
btuzun@oz-kan.com.tr

View All Listings by this Company

Print This Approval


#2104061

Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104061
Note:
Fittings in this section are suitable for above ground installations only.
Size:
See model.
Marking:
CSA FOX & SIZE ON BODY CSA & FOX ON DATA PLATE
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
Double orifice FOX & LYNX 1” & 2” BSP female inlet. DN50 - DN200. Double orifice with anti-surge FOX AS & LYNX AS 1” & 2” BSP female inlet DN50 - DN200. Double orifice with rapid fill protection FOX RPF & LYNX RFP 1 & 2” BSP female inlet DN50 - DN200.
Product Images

Approval Holder:
CSA S.r.l
Company Name
CSA S.r.l
Address
Strada San Giuseppe 15 Localita Ponteghiara - 43039 Salsomaggiore Terme (PR)
Country
Italy
Phone
+390524523978
General Email
peter@ttflow.com

View All Listings by this Company

Print This Approval


#2105047

Concealed, wall mounted, manual shower blending valve incorporating a brass body, ceramic cartridge headwork and a self-cancelling diverter to a second shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2105047
Note:
This approval does not include a shower hose and handset. Not supplied with any operating members.
Size:
½” BSP (F) inlet and outlet
Marking:
THG on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2026
Model:
6550A/W
Product Images

Approval Holder:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company
Manufacturer:
THG Paris
Company Name
THG Paris
Address
35 rue Tournière Béthencourt sur Mer
Postcode
80130
Country
France
Phone
+33 3.22.60.20.80
General Email
cvallee@thg.fr

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 78 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.