Directory Search Results

Print List

#2212119

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212119
Size:
½” BSP (M)
Marking:
WRAS, Model name and MyLife on front panel. 6 Litre inside of cistern.
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
MLSOL1000WHF (500mm) with frame MLSOL1135WHF (500mm) with frame MLSOLIWC (500mm) without frame

Approval Holder:
MyLife Bathrooms Limited
Company Name
MyLife Bathrooms Limited
Address
Greenbank Industrial Estate Rampart Road Newry
Postcode
BT34 2QU
Country
United Kingdom
Phone
07835115808
General Email
cahal.lynch@mylifebathrooms.com

View All Listings by this Company

Print This Approval


#251001701

WC Cistern incorporating a side or bottom entry float operated inlet valve and a Syphon (Phantom S), Pneumatic Drop Valve (Phantom V) or Cable Operated Drop Valve (Phantom T) with full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
251001701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male inlet connection.
Marking:
Dudley on cistern, 6l line inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/10/2030
Model:
Phantom S, Phantom V & Phantom T

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250902719

W/C suite with pan (polyester) and a concealed flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a single flush drop valve for full flush volumes of up to 6 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 Bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
250902719
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Wallgate logo and model code on adhesive label inside cistern. 6L waterline marked inside cistern.
Installation Requirements:
R001 R559
Expiry date:
30/09/2030
Model:
CIST19-PNEU-2

Approval Holder:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company
Manufacturer:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

Print This Approval


#250902030

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated stainless steel or brass bodies, see models). The flow is controlled by a solenoid valve that is activated via an infrared sensor. Temperature is controlled independently via a single lever operating member. The spout outlets incorporate plastic aerators. Supplied with hoses that incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar Maximum operating temperature 65.0°C

Section:
0685 Combination Tap Assembly
Section Subtitle:
Tap(s) with a non-touch method of flow control incorporating temperature control.
WRAS Approval Number:
250902030
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless Steel braided PEX lined flexible hoses with a 3/8" BSP Captive nut
Marking:
Stern on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2030
Model:
Brass Bodies: 237102 – Extreme 1000LFB 237003 – Extreme 1000LFE Stainless Fixed Bodies: 237103 – Extreme 1000LFB AISI316 237004 – Extreme 1000LFE AISI316

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#250902032

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies). Flow is controlled by solenoid valves activated via an infra-red sensor and the temperature is controlled independently via single lever. The spout outlets incorporate plastic aerators. Maximum working pressure 8 Bar. Maximum operating temperature 65°C.

Section:
0685 Combination Tap Assembly
Section Subtitle:
Tap(s) with a non-touch method of flow control incorporating temperature control.
WRAS Approval Number:
250902032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined hose incorporating 3/8" BSP (F) captive nut end connection
Marking:
Stern on top of tap body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2030
Model:
212050 – Boreal 1000B 212055 – Boreal 1000E 212060 – Boreal 1000 Plus B 212065 – Boreal 1000 Plus E

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#251002005

Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator. The products are supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.

Section:
0690 Combination Tap Assemblies
Section Subtitle:
Combined bath filler and overflow(s).
WRAS Approval Number:
251002005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided EPDM lined flexible hose assembly with a ½” BSP (F) captive nut end connection.
Marking:
DTC 56 on waste operating member
Installation Requirements:
R001 R576
Expiry date:
31/10/2030
Model:
PUW206, PUW206BB & PUW206BK

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#250815307

Section:
1660 Shower Outlets
Description:
A Shower hose(s)
EPDM lining With Stainless steel.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001
Expiry date:
31/08/2030

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlSpout OutletIncludes
JD-PS***-**-****F1/2, M15*1Open outlet use only85Kind, WRAS, Production date(MM.YYYY)FerruleNo

Notes & Further Information

Note: 1. 1st *** denotes the hose length: 15-300cm: E.g., 015 = 15cm, 100 = 100cm, 200 = 200cm. 2. 2nd ** denotes the hose size: 06=DN6, 07=DN7 3. 3rd **** denotes the connections, and can be replaced with any of the following: 01=F1/2 05=M15*1


Approval Holder:
Guangzhou KIND Architecture Material Technology Co., Ltd.
Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

Print This Approval


#250988001

‘Union Range’ of shower kits. Comprising of a plastic shower handset, shower hose and brass wall outlet (various finishes – See model). The shower handset incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection) Maximum operating temperature 60°C.

Section:
1670 Shower Outlets
Section Subtitle:
Shower kit(s)
WRAS Approval Number:
250988001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Crosswater ‘X; Logo on escutcheon
Plating:
Models incorporate chrome plating verified by test
Installation Requirements:
R001 R040
Expiry date:
30/09/2030
Model:
UB963x

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#250902037

Range of T type thermostatic mixing valves with chrome plated DZR brass bodies. Compression and push-fit models for use with copper pipe manufactured to EN1057. Models 37.20122.015.CP,37.20122.022.CP, 37.21122.015.CP, 37.21122.022.CP, 37.21222.015.CP, 37.21222.022.CP, 37.20162.015.CP, 37.20162.022.CP have isolation valves and strainers on the inlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2025 Valves
Section Subtitle:
T-type thermostatic blending valve(s)
WRAS Approval Number:
250902037
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression, 22mm Compression, ½” BSP M, ¾” BSP M, 15mm Push fit, 22mm Push fit
Marking:
V&G Logo, DR, Size, PN on valve body. Product info on collar.
Installation Requirements:
R001 R010
Expiry date:
30/09/2030
Model:
37.20102.015.CP, 37.20102.022.CP, 37.20102.G15.CP, 37.20102.G20.CP, 37.20112.015.CP, 37.20112.022.CP, 37.20112.G15.CP, 37.20112.G20.CP, 37.20122.015.CP, 37.20122.022.CP, 37.21102.015.CP, 37.21102.022.CP, 37.21122.015.CP, 37.21122.022.CP, 37.21222.015.CP, 37.21222.022.CP, 37.20162.015.CP, 37.20162.022.CP, 37.20152.G15.CP, 37.20152.G20.CP, 37.20152.015.CP, 37.20152.022.CP.

Approval Holder:
Zhejiang Valogin Technology Co., Ltd.
Company Name
Zhejiang Valogin Technology Co., Ltd.
Address
Qinggang Technological Industrial Zone Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#250912047

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator and a swivel nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0410 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet swivel spout with swivel nozzle.
WRAS Approval Number:
250912047
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SUERDA on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2030
Model:
SH20524 - Bramley Basin Mono Mixer chrome.

Approval Holder:
ZHEJIANG SUERDA SANITARY CO.,LTD.
Company Name
ZHEJIANG SUERDA SANITARY CO.,LTD.
Address
No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
ZHEJIANG SUERDA SANITARY CO.,LTD.
Company Name
ZHEJIANG SUERDA SANITARY CO.,LTD.
Address
No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang
Country
China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 770 of 888

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.