Range of three-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes). Incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C

Section:

0655 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.

WRAS Approval Number:

241002045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The products are supplied with a shower hose and handset Product 71 730 xx0 to be installed in combination with 13437180 Basic set for 3-hole rim mounted single lever bath mixer (WRAS 2303055). Product 71 731 xx0 to be installed in combination with 13439180 Basic set for 3-hole rim mounted single lever bath mixer (WRAS 2311033).

Size:

½” BSP (M)

Marking:

Hansgrohe on spout and operating member

Installation Requirements:

R001 R006 R007 R030

Expiry date:

31/10/2029

Model:

71 730 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer 71 731 xxx Hansgrohe Talis E 3-hole rim mounted bath mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of combined bath filler and/or waste and overflow assemblies (see models) in various finishes. Maximum operating temperature: 60ºC

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241002055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Stainless steel braided, EPDM lined, flexible hose assembly with a ½” BSP (F) captive nut (Filling Hose) and 1½” BSP (M) (Pop Up Waste)

Marking:

WRAS approved, CGS logo and product code on face plate

Installation Requirements:

R001 R576

Expiry date:

31/10/2029

Model:

SK134YY.XX (filler, waste and overflow), SK132YY.XX (filler, waste and overflow), SK122YY.XX (filler, waste and overflow), SK14YY.XX (waste and overflow). Model added February 2025: SK157YY.XX (filler, waste and overflow). Where YY denotes the overflow hose length and can be replaced with the following. Blank = max. 80cm, -1 = max. 125cm. Where XX denotes the finish, and can be replaced with any of the following: 01 = Standard Chrome, 05 = PVD Chrome, 06 = Black Chrome, 12 = Gold, 15 = Rose Gold, 17 = PVD Gold, 25 = Brushed Bronze, 26 = Brushed Copper, 33 = White Matt, 35 = White, 43 = Black Matt, 45 = Black, 40 = Brushed Nickel.

Product Images

Approval Holder:

C.G.S. S.R.L.

Company Name

C.G.S. S.R.L.

Address

Via Torino 9/A Cureggio (NO)

Postcode

28060

Country

Italy

General Email

f.cerutti@cgsmixer.com

View All Listings by this Company

Range of floor standing, single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a manually operated diverter to a shower outlet. The spout outlet incorporates a plastic aerator. Model F9912-** incorporates a single check valve cartridge at the inlet, however, the whole product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241004005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

F9902 - Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections. F9912 - ½” BSP (M)

Marking:

Lanbiao etched on operating member.

Installation Requirements:

R001 R010 R030

Expiry date:

31/10/2029

Model:

F9902-** F9912-** **Represents the following different surface treatments on body: 1. H‐Black 2. N‐ Nickel Brushed 3. GJS‐ Zirconium gold brushed 4. G‐ Zirconium gold 5. QTSL‐ Brushed bronze bright 6. QTS‐Brushed Bronze Matte 7. TJ‐ Titanium 8. TJLS‐ Titanium brushed 9. MGJ‐ Rose gold 10. MGJL‐ Rose gold brushed 11. HGT‐ Red bronze 12. HTL‐ Brushed brass 13. HTS‐ Brushed copper 14. PVDQH‐Gun Ash 15. HQ‐Gun Ash Brushed 16. Q‐Bronze 17. DYB‐Electrophoresis Matt White 18. STS‐Acid copper brushed 19. BZ‐Spray pearl white 20. B‐Spray matt white

Product Images

Manufacturer:

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name

TAIZHOU LANBIAO SANITARY WARE CO., LTD

Address

Xudou Villiage Qinggang Yuhuan Zhejiang

Postcode

317606

Country

China

Phone

18957382651

View All Listings by this Company

Range of wall mounted spout outlets (brass bodies - various finishes) incorporating a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

241004011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M)

Marking:

Villeroy & Boch logo on mounting ring

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

TVW10612A151XX Dawn TVW10612A152XX Dawn TVW10612A153XX Dawn TVT106505151XX Dawn TVT106505152XX Dawn TVT106505153XX Dawn XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of shock arrestors comprising of a copper tube and brass adapter. Max working pressure 10.0 Bar. Max working temperature 80°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) ¾” BSP (M) 1” BSP (M)

Marking:

VIR, WRAS and product info on label.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

9WH Water Hammer Arrestor

Product Images

Approval Holder:

VIR Valvoindustria Ing. Rizzio S.p.A.

Company Name

VIR Valvoindustria Ing. Rizzio S.p.A.

Address

Via Circonvallazione n. 10, 13018 Valduggia (VC)

Country

Italy

View All Listings by this Company

Shock arrestor with stainless steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Strada and technical info on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

SPSA-01 Potable shock arrestor 0.16L

Product Images

Approval Holder:

Strada Products Limited

Company Name

Strada Products Limited

Address

Unit A, 82 James Carter Road, Mildenhall Industrial Estate, Suffolk

Postcode

IP28 7DE

View All Listings by this Company

Ranges of cylindrical or tubular expansion vessels with epoxy coated or uncoated steel bodies and either Butyl or EPDM membranes. Maximum working pressure of Tube models is 8.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 99°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

241102702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.

Size:

INOX ULTRA-PRO – 1” BSP (M), TUBE – ½” BSP (M), TURBOFLEX – ½” BSP (M) inlet and outlet.

Marking:

Zilmet and product information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

INOX ULTRA-PRO - 10 bar 22 (Type 24), 50, 60 and 100 litres (Horizontal and Vertical Stand). TUBE 8 bar - 4 litres. TURBOFLEX 10 bar- 4 litres MODELS ADDED NOVEMBER 2024: TUBE – 2L & 3L.

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company

Range of cylindrical expansion vessels with epoxy coated or uncoated steel bodies and Butyl membranes. Maximum working pressure 10.0 Bar (15.0 bar INOX PRO 0.16L). Maximum operating temperature 99.0°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

INOX-PRO: ½” – 1” BSP (M) HYDRO-PRO: ½” – 1” BSP (M), WATER-PRO: ¾” – 1” BSP (M) HYDRO –PLUS 50LTR & WATER, PRO RANGE 80LTR – 1” BSP (M) HYDRO PLUS, HYDRO PRO, RANGE 105LTR - 600LTR - 1¼” BSP (M) HYDROCHAUD RANGE 2LTR - 50LTR - 3/4" - 1" BSP (M)

Marking:

Zilmet logo, model, max temp, pre charge pressure, capacity and other technical info on label on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

INOX-PRO - 0.16LTR (15 Bar), 0.50LTR, 0.60LTR, 1LTR, 2LTR, 8LTR, 12LTR and 18LTR. HYDRO-PLUS / HYDRO-PRO / WATER-PRO / HYDRO-PLUS E / HYDROCHAUD - 2LTR, 5LTR, 8LTR, 12LTR, 18LTR, 24LTR, 35LTR and 50LTR. HYDRO-PLUS / HYDRO-PRO / WATER-PRO - 80LTR, 105LTR, 150LTR, 200LTR, 250LTR, 300LTR, 400LTR, 450LTR, 500LTR and 600LTR. HYDRO-PLUS E - 80LTR, 105LTR, 129LTR, 150LTR, 207LTR, 300LTR and 450LTR.

Approval Holder:

Zilmet UK Limited

Company Name

Zilmet UK Limited

Address

Airfield Industrial Estate, Hixon, Stafford

Postcode

ST18 0PF

Phone

01889 272 185

General Email

sales@zilmet.co.uk

View All Listings by this Company

Manufacturer:

Zilmet Spa

Company Name

Zilmet Spa

Address

35010 Limena (Padova) Via Del Santo 242 Italy

Phone

+ 49 8840662 Fax: + 49 767321 Telex: 430181

General Email

View All Listings by this Company

Range of plastic pushfit fittings for use with ‘Bevex’ polypropylene pipe. Maximum working pressure 6.5bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241002047

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models.

Marking:

Tecflo logo, model and size on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2029

Model:

Fittings: TF00101 - 3/8” pushfit x 3/8” pushfit Equal Elbow, TF00102 - 3/8” pushfit Equal Straight Connector, TF00104 - 5/16” pushfit x 3/16” pushfit Reducer, TF00105 - 3/8” pushfit x 3/16” pushfit Reducer, TF00111 - 3/8” pushfit x 3/16” pushfit Straight Connector, TF00112 - 3/8” pushfit to 5/16” pushfit Straight Connector, TF00113 - 5/16” pushfit x 3/16” pushfit Straight Connector, TF00115 - 5/16” pushfit Equal Straight Connector, TF00117 - 3/16” pushfit Equal Straight Connector. Pipes: 85TD490010 - 3/8", 85TD490002 - 5/16", 85TD490005 - 3/16".

Product Images

Approval Holder:

TECFLO LIMITED

Company Name

TECFLO LIMITED

Address

UNIT C, HIGHFIELD ROAD, LITTLE HULTON, MANCHESTER, M38 9ST

General Email

info@tec-flo.co.uk

View All Listings by this Company

Range of “KFLEX SOLID” brass compression fittings, press profile H, TH, F and U, for use with “KFLEX SOLID” multilayers PE-RT/Al/PE-RT pipes. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

K-Flex solid PE-RT 11/AL/PE-RT11, diameter and product info on pipe. K-Flex & size and crimp.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

STRAIGHT FITTING MALE DN 16x1/2” 16x3/4” 20x1/2” 20x3/4” 20x1” 25x1/2” 25x3/4” 25x1” 26x1/2” 26x3/4” 26x1” 32x1” 32x1 1/4" STRAIGHT FITTING FEMALE DN 16x1/2” 16x3/4” 20x1/2” 20x3/4” 25x1/2” 25x3/4” 25x1” 26x1/2” 26x3/4” 26x1” 32x1” STRAIGHT FITTING UNEQUAL DN 20x16 25x16 26x16 25x20 26x20 32x25 32x26 EQUAL STRAIGHT UNION FITTING DN 16 20 25 26 32 ELBOW WITH PLATE FITTING MALE DN 16x1/2” 20x1/2” ELBOW FEMALE FITTING DN 16x1/2” 16x3/4” 20x1/2” 20x3/4” 25x3/4” 25x1” 26x3/4” 26x1” 32x1” ELBOW MALE FITTING DN 16x1/2” 16x3/4” 20x1/2” 20x3/4” 25x3/4” 25x1” 26x3/4” 26x1” 32x1” ELBOW FITTING DN 16 20 25 26 32 UNEQUAL TEE FITTING DN 16x20x16 20x16x20 20x16x16 20x20x16 25x16x25 20x25x20 25x20x25 25x20x16 25x16x20 25x20x20 25x25x20 26x16x26 20x26x20 26x20x26 26x20x16 32x16x32 32x20x32 32x25x32 EQUAL TEE FITTING DN 16 20 25 26 32 FEMALE TEE FITTING DN 16x1/2”x16 20x1/2”x20 20x3/4”x20 25x1”x25 26x1”x26 32x3/4”x32 32x1”x32 MALE TEE FITTING DN 16x1/2”x16 20x1/2”x20 20x3/4”x20 25x1/2”x25 25x3/4”x25 25x1”x25 26x1/2”x26 26x3/4”x26 32x1”x32 PIPES K-FLEX SOLID MULTILAYER PIPE DN 16 20 25 26 32 Legend for codes: (only the ones in red change) FITTINGS: 86MLA = generic code XX = type of fittings male straight fitting = AC female straight fitting = AD unequal straight fitting = AB equal straight fitting = AA elbow with plate fitting = AN female elbow fitting = AH male elbow fitting = AG equal elbow fitting = AF unequal tee fitting = AK equal tee fitting = AJ female tee fitting = AM male tee fitting = AL 1A = material of fitting = brass YY = dimension of fitting (01=16, 02=20, 03= 25, 09=26 or 04=32) WW = dimension of fitting (ONLY in case of unequal fitting with 2 ends) ZZ = dimension of fitting ((ONLY in case of unequal fitting with 3 ends) C = = packaging (C = carton) PIPES 2 = generic code for multilayer 6D = trade name (K-FLEX SOLID) 1 = 1st layer (1 = PE-RT) 1 = 2nd layer (1 = PROCESSING ADHESIVE) X = 3rd layer (1 = 0,2 ALU thick; 3 = 0,3 ALU thick; ….) 1 = 4th layer (1 = PROCESSING ADHESIVE) 1 = 5th layer (1 = PE-RT) YY = Insulation – (in case there is an insulation PE pipe, this code identifies the thickness of insulation) W = pipe diameter (A = 16; B = 20; H= 25; C = 26; D =32 …..) Z = wall pipe thickness (A = 2.0; C = 3; …..) A = length of coil of pipe (irrelevant for homologation) B = accessories / extra information (irrelevant for homologation) C = packaging (irrelevant for homologation)

Product Images

Manufacturer:

L’ISOLANTE K-FLEX SPA

Company Name

L’ISOLANTE K-FLEX SPA

Address

Via Don Locatelli, 35 20877 RONCELLO (MB)

Country

Italy

View All Listings by this Company