Range of air release valves with plastic bodies, EPDM ‘O’ rings and polypropylene floats. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1980 Valves

Section Subtitle:

Air venting valve(s) Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

241204001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Bermad on body. Size, model, PN, DN, date of manufacture (MM/YYYY) on adhesive label on body.

Installation Requirements:

R001 R535

Expiry date:

31/12/2029

Model:

A30-3/4”: ¾” BSP (M). A30-1”: 1” BSP (M). C30-3/4”: ¾” BSP (M). C30-1”: 1” BSP (M). C30-2”: 2” BSP (M).

Approval Holder:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

Manufacturer:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

Range of automatic air venting valves with plastic bodies and EPDM ‘O’-rings. Maximum working pressure 6.0 bar. Maximum operating temperature 99°C.

Section:

1980 Valves

Section Subtitle:

Air venting valve(s) Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

240504023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For close circuit use only.

Size:

See models.

Marking:

Caleffi logo moulded on cap.

Installation Requirements:

R001 R200

Expiry date:

31/05/2029

Model:

49513: 20.9mm pushfit manifold, C502433 CST: ⅜” BSP (M), C502600 CST: 19.9mm pushfit manifold, C502601 CST: 20.9mm pushfit manifold, C502604 PLY: 17.7mm pushfit manifold, C502630 CST: ⅜” BSP (M), C502631 CST: ⅜” BSP (M), C502633 CST: ⅜” BSP (M), C502640 CST: ½” BSP (M), C502644 CST: ½” BSP (M), C502634 CST: ⅜” BSP (M).

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The inlet adaptors for models 400MX15CP & 400MX22CP are 90° elbows instead of straight adaptors and incorporate additional integral spherical valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240602048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.

Marking:

IMIX, CR and size on body. Intamix on label on cap.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

15mm Compression Models: 40015CP 400MX15CP 40015FP 40015CEM 40015MD 40015CBA 40015CR WMTMV15 22mm Compression Models: 40022CP 400MX22CP 40022FP 40022CEM 40022MD 40022CBA 40022CR Pushfit models: 40015PF 40022PF Models added July 2025 400MX15CBA 400MX22CBA

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Wall mounted, thermostatic shower valve, (brass body – chrome plated), incorporating a single sequential headwork with a single lever operating member. The inlet elbows incorporate key operated spherical valves with chrome plated brass balls, PTFE seats and approved single check vlave cartridges, however, the complete product has not been fully tested to demonstrate backflow protection. To be used with copper pipe only – Standard EN 1057 Maximum working pressure 5 Bar. Maximum operating temperature 65°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240204064

Note:

The product is not supplied with a shower hose or handset.

Size:

15mm Compression

Marking:

BOME, Model and date of manufacture on data plate on body.

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2029

Model:

S15T154C-IN S16T153C-IN S16T154C-IN Thermostatic shower valves

Approval Holder:

Bome Srl

Company Name

Bome Srl

Address

via Allo Strego 1 Cavallirio 28010 Cavallirio

Country

Italy

View All Listings by this Company

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240602060

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.

Marking:

DVS on cap IMIX, CR and size on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

15mm Compression Models: AC17-047 22mm Compression Models: AC17-048

Approval Holder:

KWC DVS Ltd.

Company Name

KWC DVS Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

Phone

01246 458 900

General Email

richard.lamb@kwc.com

View All Listings by this Company