Directory Search Results

Print List

#2007385

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2007385
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC25 (brand of Methven) & Methven on body.
Installation Requirements:
R001 R090
Expiry date:
31/07/2025
Model:
HASMCP COMBINATION TAP ASSEMBLIES

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2010912

Range of single hole, single outlet fixed combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating members. The spout outlet incorporates a plastic flow straightener. Products are supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2010912
Size:
Stainless steel braided EPDM lined hose assemblies with ½” BSP captive nut end connections
Marking:
Twyford on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
X505126 CP, X505122CP, X605122CP, X705122CP, X605126CP, X705126CP

Approval Holder:
Twyford Geberit Group
Company Name
Twyford Geberit Group
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926 516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2010081

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2010081
Size:
Stainless steel braided EPDM lined hose assemblies with 1/2" captive nuts.
Marking:
AQUALISA ON OPERATING MEMBER
Installation Requirements:
R001 R005 R010
Expiry date:
31/10/2025
Model:
CT.SPT.CH CENTRAL CHROME PILLAR TAP DT.LPT.CH DOWNTOWN CHROME PILLAR TAP (LARGE) DT.SPT.CH DOWNTOWN CHROME PILLAR TAP (LARGE) COMBINATION TAP ASSEMBLIES

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2010320

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets of models SAVV2313 & SEV313 incorporate a plastic aerator, model SPA2113/EX incorporates a stainless steel filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2010320
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Deva on operating member (all models). Models SAVV2313 and SEV313, DTC53 (brand of Methven) on rear of body. Model SPA2113/EX, DTC52 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
SAVV2313 Savvi MK2 SEV313 SPA2113/EX Sparkle MK2
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2010363

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via infra-red sensor. Solenoid housing incorporated a filter mesh. The product is supplied with a stainless steel braided EPDM lined flexible hose assembly to connect between the tap body and the solenoid valve. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2010363
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP (F) captive nut
Marking:
Zhejiang Homes Bathroom Technology Co Ltd on body.
Installation Requirements:
R001 R006 R008
Expiry date:
31/10/2025
Model:
ST008 Sensor tap.
Product Images

Approval Holder:
Zhejiang Homes Bathroom Technology Co., Ltd.
Company Name
Zhejiang Homes Bathroom Technology Co., Ltd.
Address
No 256 Jinhai Road, Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Homes Bathroom Technology Co., Ltd.
Company Name
Zhejiang Homes Bathroom Technology Co., Ltd.
Address
No 256 Jinhai Road, Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China

View All Listings by this Company

Print This Approval


#2011008

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever (Absolute range) or dome type (Engineer & Illustrious range) operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60.0°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2011008
Size:
Stainless steel braided EPDM lined flexible hose with ½” BSP captive nut (Illustrious range) or Stainless steel braided PEX lined flexible hose with ½” BSP captive nut (Engineer and Absolute ranges)
Marking:
Swadling Brassware on operating member (Illustrious range) or “S” swaddling logo on rear base of body (Engineer & Absolute ranges).
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
Illustrious Range: 9920XX, 9923XX, 9926XX, 9929XX & 9922XX. Engineer Range: 8920XX. Absolute Range: 6920XX. XX Denotes the finish. Available In Finishes As Below: NP = Nickel Plated NB = Nickel Brushed CP = Chrome Plated MG = Gold Plated LB = Living Brass GB = Gold Brushed BB = Brushed Brass AB = Aged Brass
Product Images

Approval Holder:
Matki Plc.
Company Name
Matki Plc.
Address
Churchward Road Yate Bristol
Postcode
BS37 5PL

View All Listings by this Company
Manufacturer:
Swadling Brassware
Company Name
Swadling Brassware
Address

View All Listings by this Company

Print This Approval


#2011030

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator and the inlets incorporate a stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2011030
Size:
Nylon braided, PEX lined flexible hose incorporating either 3/8” BSP captive nut or ½” BSP captive nut.
Marking:
Duschy on operating members.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2025
Model:
P10000921 & P10000923
Product Images

Approval Holder:
Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd
Company Name
Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd
Address
28 Hongyue Road Economic & Technolgical Development Zone
Postcode
China

View All Listings by this Company
Manufacturer:
Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd
Company Name
Xuancheng Duschy Electronic & Electrical Appliances Co. Ltd
Address
28 Hongyue Road Economic & Technolgical Development Zone
Postcode
China

View All Listings by this Company

Print This Approval


#2011054

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener with an optional aerator. Fittings are supplied with a pop-up waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2011054
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Francis Pegler on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
4K7101 Tempest mono basin mixer. 4K7102 Tempest mini mono basin mixer.
Product Images

Approval Holder:
STH Westco Limited
Company Name
STH Westco Limited
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230
General Email
john.gartshore@westco.co.uk

View All Listings by this Company
Manufacturer:
STH Jiangmen
Company Name
STH Jiangmen
General Email

View All Listings by this Company

Print This Approval


#2011904

Single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2011904
Size:
Stainless steel braided, EPDM lined hose assemblies incorporating ½” BSP captive nut end connections
Marking:
Alterna on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
ALT10021
Product Images

Approval Holder:
Saint-Gobain Building Distribution Ltd
Company Name
Saint-Gobain Building Distribution Ltd
Address

View All Listings by this Company

Print This Approval


#2011905

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet of model 825JK incorporates a plastic aerator. Products are supplied with a click type waste. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2011905
Size:
Stainless steel braided, EPDM lined hose assemblies incorporating ½” BSP captive nut end connections
Marking:
Bristan on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
818JK & 825JK
Product Images

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 75 of 1108

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.