Range of two-hole, single outlet (fixed) combination tap assemblies various finishes incorporating quarter turn ceramic disc headworks with various operating members and lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. temperature 60°C.

Section:

0525 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout, incorporating a semi-automatic (lockable) diverter to a shower outlet.

WRAS Approval Number:

2303397

Note:

Not supplied with hose or shower handset

Size:

¾” BSP(M)

Marking:

HIB on tap body

Installation Requirements:

R001 R006 R020

Expiry date:

31/03/2028

Model:

N0TAP06ATL Models added September 2024 N1TAP06ATL N2TAP06ATL N3TAP06ATL N4TAP06ATL

Approval Holder:

HiB Ltd.

Company Name

HiB Ltd.

Address

Building 3, North London Business Park New Southgate London

Postcode

N11 1GN

View All Listings by this Company

Range of wall mounted or floor standing spout outlets (fixed or swivel - see model in various finishes). All models incorporate a plastic flow straightener, except for the 93-Floor Mounted Bath Filler which has a plastic aerator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2303079

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

ABI on tab base

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

Floor Mounted Bath Filler 12126 – Matte Black 12128 – Brushed Brass 12127 – Brushed Nickel 12125 - Chrome 12130 – Brushed Copper 12131 - White 12129 – Brushed Gunmetal Wall Mounted Spout 15386 – Brushed Nickel 15388 – Matte Black 15385 – Brushed Gunmetal 16704 – Tumbled Aged Brass 15383 – Brushed Brass 15384 – Brushed Copper 11666 - White 15387 - Chrome Mini Wall Mounted Spout 15379 – Brushed Nickel 15381 – Matte Black 15376 – Brushed Brass 12292 – Brushed Copper 15380 - Chrome 12293 - White 12291 – Brushed Gunmetal Kingsley Wall Mounted Spout 15367 - Chrome 14654 – Matte Black 15366 – Brushed Nickel 15365 – Brushed Brass 16929 – Brushed Copper

Approval Holder:

ABI INTERIORS PTY LTD

Company Name

ABI INTERIORS PTY LTD

Address

316 DESIGN CENTRE EAST LONDON

Postcode

SW10 0XE

View All Listings by this Company

Range of deck mounted spout outlets (fixed or swivel - see model, Various finishes) incorporating a plastic flow straightener. The products are supplied with metal backnuts.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2303080

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

ABI ON TAP BODY

Installation Requirements:

R001 R006

Expiry date:

31/03/2028

Model:

Kingsley Mini Hob Spout 15362 – Brushed Nickel 15363 - Chrome 14650 – Matte Black 15361 – Brushed Brass 16930 – Brushed Copper Kingsley Gooseneck Swivel Hob Spout 16931 – Brushed Copper 15358 – Brushed Nickel 15359 - Chrome 15357 – Brushed Brass 15360 – Matte Black

Approval Holder:

ABI INTERIORS PTY LTD

Company Name

ABI INTERIORS PTY LTD

Address

316 DESIGN CENTRE EAST LONDON

Postcode

SW10 0XE

View All Listings by this Company

Range of wall mounted spout outlets with (brass bodies - various finishes) incorporating a plastic aerator in the outlet. Open outlet use only. Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240902008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Villeroy & Boch Logo on spout

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

TVW126005000xx 61 = Chrome , 74 = Brushed Chrome, 63 = Graphite, 64 = Brushed Nickel matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, 70 = Dune, K5 = Matt black

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of spout outlets (brass bodies – various finishes) incorporating a plastic aerator. The product is also supplied with metal backnuts. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240902048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M)

Marking:

VoleVatch on base of Spout

Installation Requirements:

R001 R006 R010

Expiry date:

30/09/2029

Model:

B/B1-B6-00

Product Images

Approval Holder:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company

Manufacturer:

VOLEVATCH

Company Name

VOLEVATCH

Address

1 BIS PLACE JEAN JAURES 80130 TULLY

Country

FRANCE

View All Listings by this Company

Range of wall mounted spout outlets (brass bodies - various finishes) incorporating a plastic aerator at the outlet. Open outlet use only. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240904017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Villeroy & Boch logo on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

TVT107002000XX Liberty TVT122002000XX Empora XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Product Images

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of free standing sanitary macerating disposal units. The flow is controlled by solenoid valve and discharges via type a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Cold water use only.

Section:

0950 Disposal Units

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) Model or ¾” BSP (F) to ½” BSP (M) Reducer.

Marking:

Model, 'The Haigh Engineering Company Ltd', Serial number, manufacturer's address and product info on label.

Installation Requirements:

R001 R574

Expiry date:

30/09/2029

Model:

Quattro Health Care Bedpan Macerator (111565-03). Quattro XL Health Care Bedpan Macerator (111565-03). Panaway DS Health Care Bedpan Macerator (111565-04). Panaway F Health Care Bedpan Macerator (111565-04). Incomaster Incontinence & Sanitary Pad Macerator (116110-01). Incomaster XL Incontinence & Sanitary Pad Macerator (116110-01).

Product Images

Approval Holder:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Manufacturer:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Bed pan macerator with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 bar. Cold water use only.

Section:

0950 Disposal Units

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC flexible hose with a ¾” BSP captive nut end connections.

Marking:

Model, The Haigh Engineering Company Ltd, Serial No, Manufacturers address and product info on label.

Installation Requirements:

R001 R009 R574

Expiry date:

30/09/2029

Model:

SOLO Health Care Bedpan Macerator (106633-02)

Approval Holder:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Manufacturer:

The Haigh Engineering Company Limited

Company Name

The Haigh Engineering Company Limited

Address

Alton Road Ross-on-Wye Herefordshire

Country

HR9 5NG

General Email

STHURLOW@HAIGH.CO.UK

View All Listings by this Company

Filter cartridge with a plastic body. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1055 Filter Cartridges

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP male

Marking:

Grohe Blue on adhesive label on body.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

30/09/2029

Model:

40547001 Grohe Blue AC Cartridge Single

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of fohn stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with FOHN stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303394

Size:

see model

Marking:

FOHN (brand of KONTUR EESTI OÜ), size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler S15х1/2"W – 15 x 15mm S15х3/4"W – 15 x 15mm S18х1/2"W – 18 x 18mm S18х3/4"W – 18 x 18mm S22х1/2"W – 22 x 22mm S22х3/4"W – 22 x 22mm S22х1"W – 22 x 22mm S28х3/4"W – 28 x 28mm S28x1"W – 28 x 28mm S35x1"W – 35 x 35mm S35x1 1/4"W – 35 x 35mm S42х1 1/2"W – 42 x 42mm S54х2"W – 54 x 54mm Male threaded coupler with straight pipe 15х1/2"W – 15 x 15mm 15x3/4"W – 15 x 15mm 18х1/2"W – 18 x 18mm 18х3/4"W – 18 x 18mm 18x1"W – 18 x 18mm 22х1/2"W – 22 x 22mm 22х3/4"W – 22 x 22mm 22x1"W – 22 x 22mm 28х3/4"W – 28 x 28MM 28х1"W – 28 x 28mm 35х1 1/4"W – 35 x 35mm 42х1 1/2"W – 42 x 42mm 54х2"W – 54 x 54mm Female threaded coupler S15х1/2"N – 15 x 15mm S18х1/2"N – 18 x 18mm S18х3/4"N – 18 x 18mm S22х1/2"N – 22 x 22mm S22х3/4"N – 22 x 22mm S28х3/4"N – 28 x 28mm S28х1"N – 28 x 28mm S35x1"N – 35 x 35mm S35x1 1/4"N – 35 x 35mm S42х1 1/2"N – 42 x 42mm S54х2"N – 54 x 54mm Female threaded coupler with straight pipe 15х1/2"N – 15 x 15mm 15x3/4"N – 15 x 15mm 18х1/2"N – 18 x 18mm 18х3/4"N – 18 x 18mm 18x1"N – 18 x 18mm 22х1/2"N – 22 x 22mm 22х3/4"N – 22 x 22mm 22x1"N – 22 x 22mm 28х3/4"N – 28 x 28mm 28х1"N – 28 x 28mm 35х1 1/4"N – 35 x 35mm 42х1 1/2"N – 42 x 42mm 54х2"N – 54 x 54mm Coupler S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S18х15Ⅱ – 15 x 15mm S22х15Ⅱ – 15 x 15mm S22х18Ⅱ – 18 x 18mm S28х15Ⅱ – 15 x 15mm S28х18Ⅱ – 18 x 18mm S28х22Ⅱ – 22 x 22mm S35х15Ⅱ – 15 x 15mm S35х18Ⅱ – 18 x 18mm S35х22Ⅱ – 22 x 22mm S35х28Ⅱ – 28 x 28mm S42х22Ⅱ – 22 x 22mm S42х28Ⅱ – 28 x 28mm S42х35Ⅱ – 35 x 35mm S54х28Ⅱ – 28 x 28mm S54х35Ⅱ – 35 x 35mm S54х42Ⅱ – 42 x 42mm Adjustable connector S15Ⅱ – 15 x 15mm S18Ⅱ – 18 x 18mm S22Ⅱ – 22 x 22mm S28Ⅱ – 28 x 28mm S35Ⅱ – 35 x 35mm S42Ⅱ – 42 x 42mm S54Ⅱ – 54 x 54mm Union H15х1/2" – 15 x 15mm H15х3/4" – 15 x 15mm H18х1/2" – 18 x 18mm H18х3/4" – 18 x 18mm H22х1/2" – 22 x 22mm H22х3/4" – 22 x 22mm H28х3/4" – 28 x 28mm H28х1" – 28 x 28mm H35x1" – 35 x 35mm H35x1 1/4" – 35 x 35mm H42х1 1/2" – 42 x 42mm H54х2" – 54 x 54mm Tee T15 – 15 x 15mm T18х15х18 – 18 x 18mm T18 – 18 x 18mm T22х18х22 – 22 x 22mm T22х15х22 – 22 x 22mm T22 – 22 x 22mm T28x15x28 – 28 x 28mm T28х22х22 – 28 x 28mm T28x22x28 – 28 x 28mm T28 – 28 x 28mm T35x15x35 – 35 x 35mm T35x22x35 – 35 x 35mm T35x28x35 – 35 x 35mm T35 – 35 x 35mm T42х35х42 – 42 x 42mm T42 – 42 x 42mm T54х42х54 – 54 x 54mm T54 – 54 x 54mm Female threaded Tee T15х1/2"Nx15 – 15 x 15mm T18х1/2"Nx18 – 18 x 18mm T18х3/4"Nx18 – 18 x 18mm T22х1/2"Nx22 – 22 x 22mm T22х3/4"Nx22 – 22 x 22mm T28х1/2"Nx28 – 28 x 28mm T28х3/4"Nx28 – 28 x 28mm T28х1"Nx28 – 28 x 28mm T35х1"Nx35 – 35 x 35mm T35х1 1/4"Nx35 – 35 x 35mm T42х1 1/2"Nх42 – 42 x 42mm T54х2"Nх54 – 54 x 54mm Male threaded Tee T15х1/2"Wx15 – 15 x 15mm T18х1/2"Wx18 – 18 x 18mm T18х3/4"Wx18 – 18 x 18mm T22х1/2"Wx22 – 22 x 22mm T22х3/4"Wx22 – 22 x 22mm T28х1/2"Wx28 – 28 x 28mm T28х3/4"Wx28 – 28 x 28mm T28х1"Wx28 – 28 x 28mm T35х1"Wx35 – 35 x 35mm T35х1 1/4"Wx35 – 35 x 35mm T42х1 1/2"Wх42 – 35 x 35mm T54х2"Wх54 – 54 x 54mm 90°B Elbow L15a – 15 x 15mm L18а – 18 x 18mm L22a – 22 x 22mm L28a – 28 x 28mm L35a – 35 x 35mm L42а – 42 x 42mm L54а – 54 x 54mm 90°A Elbow L15 – 15 x 15mm L18 – 18 x 18mm L22 – 22 x 22mm L28 – 28 x 28mm L35 – 35 x 35mm L42 – 42 x 42mm L54 – 54 x 54mm Female threaded elbow L15х1/2"N – 15 x 15mm L18х1/2"N – 18 x 18mm L18х3/4"N – 18 x 18mm L22х1/2"N – 22 x 22mm L22х3/4"N – 22 x 22mm L28х3/4"N – 28 x 28mm L35х1"N – 35 x 35mm Male threaded elbow L15x1/2"W – 15 x 15mm L18х1/2"W – 18 x 18mm L18х3/4"W – 15 x 15mm L22x1/2"W – 22 x 22mm L22x3/4"W – 22 x 22mm L28x3/4"W – 28 x 28mm L35x1"W – 35 x 35mm Female threaded elbow with base L15х1/2"N(a) – 15 x 15mm L18х1/2"N(a) – 18 x 18mm L22х1/2"N(a) – 22 x 22mm L22х3/4"N(a) – 22 x 22mm 45°B Elbow 45°L15a – 15 x 15mm 45°L18а – 18 x 18mm 45°L22a – 22 x 22mm 45°L28a – 28 x 28mm 45°L35a – 35 x 35mm 45°L42а – 42 x 42mm 45°L54а – 54 x 54mm 45°A Elbow 45°L15 – 15 x 15mm 45°L18 – 18 x 18mm 45°L22 – 22 x 22mm 45°L28 – 28 x 28mm 45°L35 – 35 x 35mm 45°L42 – 42 x 42mm 45°L54 – 54 x 54mm One end pipe bridge Ω15a – 15 x 15mm Ω18a – 18 x 18mm Ω22a – 22 x 22mm Pipe Bridge Ω15 – 15 x 15mm Ω18 – 18 x 18mm Ω22 – 22 x 22mm Ω28 – 28 x 28mm Cap D15 – 15 x 15mm D18 – 18 x 18mm D22 – 22 x 22mm D28 – 28 x 28mm D35 – 35 x 35mm D42 – 42 x 42mm D54 – 54 x 54mm Pipe Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm

Approval Holder:

KONTUR EESTI OÜ

Company Name

KONTUR EESTI OÜ

Address

Türi tn 10d, Tallinn, 11313, Harju maakond

Country

Estonia

View All Listings by this Company