Directory Search Results

Print List

#241202063

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). For use with: Copper Pipes manufactured in accordance with BS EN 1057 Plastic PB pipes manufactured in accordance with BS 7291-2 Plastic PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure: 6.0 bar @ 65°C Maximum working pressure: 12.0 bar @ 20°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241202063
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model
Marking:
Qualflex, QWRAS, 6bar@65°c /12 bar @20°c, DOM (M.YY) stamped on ferrule
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
T01001 - 15mm Brass C (Compression) and ½” F (Female) T01002 - 15mm Brass C (Compression) and ½” Plastic F (Female) T01003 -15mm Brass C (Compression) and ¾ ” Plastic F (Female) T01004 -15mm Brass C (Compression) and ½” Plastic F (Female) T01005 - 15mm Brass C (Compression) and ¾ ” Plastic F (Female) T01006 - 15mm Brass C (Compression) and 1/2 ” Plastic F (Female) T01007 - 22mm Brass C (Compression) and ¾” Plastic F (Female) T01008 - 15mm Brass C (Compression) and 1/2 ” Plastic F (Female) T01009 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01010 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01011 - 22mm Brass C (Compression) and 3/4 ” Plastic F (Female) T01012 - 15mm Brass C (Compression) and 15mm Brass C (Compression) T01013 - 22mm Brass C (Compression) and 22mm Brass C (Compression) T01014 - 15mm Brass C (Compression) and ½” Brass F (Female) T01015 - 15mm Brass C (Compression) and ½” Plastic F (Female) T01016 - 22mm Brass C (Compression) and 3/4” Plastic F (Female) T01017 - ½” Brass F (Female) and ½” Brass F (Female) T01018 - 15mm Hydra Pushfit (P) and 15mm Hydra Pushfit (P) T01019 - 22mm Hydra Pushfit (P) and 22mm Hydra Pushfit (P) T01020 - 15mm Hydra Pushfit (P) and ½” Plastic F (Female) T01021 - 15mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01022 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01023 - 15mm Hydra Pushfit (P) and 1/2” Plastic F (Female) T01024 - 15mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01025 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01026 - 15mm Hydra Pushfit (P) and 1/2” Plastic F (Female) T01027 - 22mm Hydra Pushfit (P) and 3/4” Plastic F (Female) T01028 - 15mm Brass C (Compression)and 1/2” Brass FE (Female Elbow) T01029 - 15mm Brass C (Compression) and 1/2” Brass FE (Female Elbow) T01030 - 15mm Hydra Pushfit (P) and 1/2” Brass FE (Female Elbow) T01031 - 10mm Brass Male (M) and 15mm Brass C (Compression) T01032 - 12mm Brass Male (M) and 15mm Brass C (Compression) T01033 - 10mm Brass Male (M) and 15mm Hydra Pushfit (P) T01034 - 12mm Brass Male (M) and 15mm Hydra Pushfit (P)

Approval Holder:
UK Plumbing Supplies Ltd
Company Name
UK Plumbing Supplies Ltd
Address
Quayside 2A Wilderspool Park Greenalls Avenue Cheshire
Postcode
WA4 6HL

View All Listings by this Company
Manufacturer:
Hydralectric Group Ltd.
Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200

View All Listings by this Company

Print This Approval


#250102057

Range of EPDM lined hoses with grey PVC outer layer. Maximum working pressure: 16 bar. Maximum working temperature: 60°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250102057
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (F)
Marking:
Virhoplast, WRAS, 20 BAR, 60°C MAX, Made in Italy, YYYY (Year of manufacture) on tube, WRAS on ferrule/bush
Installation Requirements:
R001 R001
Expiry date:
31/01/2030
Model:
DN13CARF/C150 INLET HOSE D.13X19 WITH ELBOW, LENGTH 1500MM DN13CARF/C200 INLET HOSE D.13X19 WITH ELBOW, LENGTH 2000MM DN10CARF/C150 INLET HOSE D.10X16 WITH ELBOW, LENGTH 1500MM DN10CARF/C200 INLET HOSE D.10X16 WITH ELBOW, LENGTH 2000MM
Product Images

Manufacturer:
Virhoplast SRL
Company Name
Virhoplast SRL
Address
Via Magenta nr. 77 - INT 13/C 20017 RHO (MI) Italy

View All Listings by this Company

Print This Approval


#241104705

Nimbus Compact range of combination heat pump units with enamel lined tank and stainless-steel coil. Fitted with a magnesium anode, expansion vessel and T&P valve set at 7 bar & 95°C. supplied with an inlet control group consisting of a pressure reducing valve, strainer, pressure relief valve and single check valve, and a tundish. Max working pressure 6.0 Bar Max operating Temperature 80 °C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Marking:
Ariston address, model no & product info on adhesive label.
Installation Requirements:
R001 R140 R360
Expiry date:
30/11/2029
Model:
3302563 Nimbus Compact-UK 35M Net R32, 3302564 Nimbus Compact-UK 50M Net R32, 3302565 Nimbus Compact-UK 80M Net R32, 3302566 Nimbus Compact-UK 80M T Net R32, 3302567 Nimbus Compact-UK 120M Net R32, 3302568 Nimbus Compact-UK 120M T Net R32, 3302569 Nimbus Compact-UK 150M Net R32, 3302570 Nimbus Compact-UK 150 M T Net R32.
Product Images

Approval Holder:
Ariston S.p.A.
Company Name
Ariston S.p.A.
Address
Viale A. Merloni 45 60044 Fabriano (AN)
Country
Italy
Phone
+39 349 3206673
General Email
francesco.sinna@ariston.com

View All Listings by this Company

Print This Approval


#250102018

Concealed, wall mounted, manual shower blending valve incorporating a brass body (various finishes) with ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60 °C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250102018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Grohe logo on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
24.334.xx1 32.742.xx1 29.078.xx1 where xx1 denotes finish, can be replaced by: 001 – Chrome DC1 – Supersteel DA1 – Warm sunset AL1 – Brushed hard graphite GL1 – cool sunrise
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250102035

Range of wall mounted, manually operated, shower valves (chromium plated brass), incorporating a ceramic cartridge headwork controlling both flow and temperature using a single lever operating member. The products (except for S suffix models) are supplied with ¾” x ½” offset union adaptors which incorporate a servicing valve. The inlets of models containing EP include plastic filters and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. All other models incorporate plastic flow regulators on each inlet and an approved single check valve cartridge on the outlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250102035
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP (M) offset union
Marking:
Delabie logo on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/01/2030
Model:
2739 2739S 2739T 2739TS 2739EP 2739TEP 2739TEPS 2739EPS
Product Images

Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 731 of 820

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.