Directory Search Results

Print List

#2304020

Range of wall mounted, single-hole, single outlet (fixed) electronically controlled combination tap assemblies (chrome plated brass bodies). Flow is controlled via a solenoid, activated via an infra-red sensor. The outlets incorporate plastic aerators. Maximum working pressure 8.0 bar Maximum operating temperature 70°C

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2304020
Size:
15 mm Spigot
Marking:
STERN logo on wall plate
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2028
Model:
237801 – Extreme CS B 237800 – Extreme CS E 237801-316 – Extreme CS B AISI316 237800-316 – Extreme CS E AISI316 237802 – Extreme CS DPB 237803 – Extreme CS DPE 237802-316 – Extreme CS DPB AISI316 237803-316 – Extreme CS DPE AISI316

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company
Manufacturer:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2305303

Range of wall mounted, electronically operated, combination tap assemblies (stainless steel body, various finishes - see model), comprising of a Premix control unit and a spout. The flow is controlled by a solenoid valve, (Premix control unit), which is actuated via an infrared sensor. The central section of the valve incorporates a plastic strainer. Both inlets of the Premix control unit incorporate an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2305303
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout.
Size:
½” BSP (M) (to hot and cold inlets of solenoid).
Marking:
QTOO (brand of D Line) on spout trim.
Installation Requirements:
R001 R008 R010 R040 R570
Expiry date:
31/05/2028
Model:
QST3190xxx (190mm spout), QST3290xxx (250mm spout). Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters. As examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.

Approval Holder:
D Line
Company Name
D Line
Address
Jylingevej 59, kld Copenhagen
Postcode
2720
Country
Denmark
Phone
+4572170138
General Email
rik@dline.com

View All Listings by this Company

Print This Approval


#2212064

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212064
Size:
½” BSP (M)
Marking:
T1803 - WRAS, Model name and Bestter on bottom of cistern, 6 Litre inside of cistern. T1900 & T1901 - WRAS, Model name and Bestter on support bracket inside of cistern, 6 Litre inside of cistern Models Added December 2023: T1811: Bestter logo and WRAS approved product on bottom of cistern T1900 (600) – T19001 (600) t1900 Bestter logo and WRAS approved product on front of support bracket
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
T1900 (500mm) with frame T1901 (500mm) without frame T1803 Models Added December 2023: T1811 T1900(600mm) T1901(600mm)

Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Print This Approval


#2306040

Range of Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. Maximum working pressure -10 Bar Maximum operating temperature - cold water use only Models T1910 & T1911 can now incorporate a T8702 flush valve. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306040
Size:
½” BSP (M)
Marking:
Bestter, Model number and Wras on Front of support bracket inside of cistern. 6 litre mark inside cistern
Installation Requirements:
R001 R556 R581
Expiry date:
30/06/2028
Model:
T1910 T1911

Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Print This Approval


#2311336

Range of tundishes incorporating a plastic or coated, mild steel body. Maximum operating temperature 85°C.

Section:
0046 Backflow Prevention Devices
Section Subtitle:
Tundish(s) air break to drain.
WRAS Approval Number:
2311336
Size:
See model
Marking:
Altecnic and product info on body. Some models are also marked with the date of manufacture. The code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019.
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
128-2001 CST 1F x 1 ¼”F Straight Tundish. 128-2003 CST 1 ½”F x 2”F Straight Tundish. 128-2004 CST 2”F x 2 ½”F Straight Tundish. 128-2005 CST 2 ½”F x 3”F Straight Tundish. 128-4001 CST 15mm x 22mm Straight Tundish. 128-4002 CST 15mm x 22mm Straight Tundish. 128-4003 CST 15mm x 22mm Straight Tundish. 128-4004 CST 22mm x 28mm Straight Tundish. AL-400010 15mm x 22mm Straight Tundish. AP-400010 15mm x 22mm Straight Tundish. AP-400012 15mm x 22mm Straight Tundish. G-128-2201 CST ½” M x ¾” M Angled Tundish. G-128-2010 CST 15mm x 22mm Straight Dry Trap Tundish. Model added May 2024: AP-400011 22mm x 28mm Straight Tundish. Model added September 2024: 128-2002CST 1 ¼” BSP(F) x 1 ½”BSP(F).

Approval Holder:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 73 of 186

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.