Range of copper brazed, stainless steel heat exchangers. Available with between 4 – 70 plates (see models). Maximum working pressure: 16.0 bar. Maximum operating temperature: 99°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

SWEO and product info on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

E5T Number of plates minimum: 6 Number of plates maximum: 48 No connection type or ¾” BSP (M) E5AS Number of plates minimum: 4 Number of plates maximum: 40 No connection type or ¾” BSP (M) E5K Number of plates minimum: 8 Number of plates maximum: 40 No connection E6T Number of plates minimum: 4 Number of plates maximum: 40 No connection type, ½” or ¾” BSP (M) E8T Number of plates minimum: 4 Number of plates maximum: 40 No connection type, ½” or ¾” BSP (M) E8AS Number of plates minimum: 4 Number of plates maximum: 46 No connection type or ¾” BSP (M) E8LAS Number of plates minimum 10 Number of plates maximum: 70 No connection, ¾” or 1” BSP (M)

Product Images

Approval Holder:

SWEP International AB

Company Name

SWEP International AB

Address

Järvgatan 3B, Box 105, 26122 Landskrona

Country

Sweden

View All Listings by this Company

Range of indirect heat interface units (HIU) providing heating and instantaneous hot water. The central heating and hot water is generated via plate heat exchangers. Maximum operating pressure 10 bar (primary and DHW secondary). Maximum operating pressure 2.5 bar CH secondary Maximum operating temperature 90°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241104709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression

Marking:

Bosch on front panel and technical info on adhesive label.

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2029

Model:

7-735-600-739 - Flow 8500 40, 7-735-600-740 - Flow 8500 40 H, 7-735-600-741 - Flow 8500 50, 7-735-600-742 - Flow 8500 50 H, 7-735-600-743 - Flow 8500 60, 7-735-600-744 - Flow 8500 60 H.

Product Images

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Range of water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20, DN25, DN32, DN40, DN50.

Marking:

Aquamotion, WRAS and technical information on meter face. Flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

MJH range.

Approval Holder:

Aquamotion

Company Name

Aquamotion

Address

Unit 7 Woodland Close Mansfield Nottinghamshire

Postcode

NG21 9BF

Country

United Kingdom

Phone

01623 664030

General Email

info@aqua-motion.co.uk

View All Listings by this Company

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) ¾” BSP (M

Marking:

GWF, model code and other info on meter box

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Sonico Nano DN15 Q3=2,5 R*** Sonico Nano DN20 Q3=2,5 R*** Sonico Nano DN20 Q3=4 R*** Body lengths DN15: 105 mm / 110mm / 115mm/ 134m / 142mm / 145mm / 160mm / 165mm / 170mm / 190mm / 220mm DN20: 105mm / 110mm / 115mm / 139mm /160mm / 165mm / 190mm / 220mm

Approval Holder:

GWF AG

Company Name

GWF AG

Address

Obergrundstrasse 119 Lucerne

Postcode

6005

Country

Switzerland

Phone

+41 41 319 51 77

General Email

moritz.roettger@gwf.ch

View All Listings by this Company

Range of water meters with brass bodies and EPDM ‘O’-rings and plastic strainer on inlet. Maximum working pressure 16 bar. Cold water use only.

Section:

1505 Water Meters

Size:

1 1/4” BSP (M) 1 ½” BSP (M) 2” BSP (M)

Marking:

Resideo & technical information on dial face. Flow arrow cast on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

EW1100CC2800 EW1100CC3900 EW1100CC4600 EW1100CM2800 EW1100CM3900 EW1100CM4600 - DN25, DN32 and DN40

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company