Directory Search Results

Print List

#250202701

`Water block` range of self-closing valves with either a natural (white), blue or grey plastic body and a gear driven volume-controlled operation device. The product incorporates a stainless-steel strainer. The product is designed to stop the flow of water once a preset value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2335 Valves
Section Subtitle:
Stop, plastic, self-closing.
WRAS Approval Number:
250202701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R008 only applies to the natural (white) body version. The self-closing function once a pre-set value has been reached has not been assessed and is not considered to be covered by the scope of this approval.
Size:
¾” BSP (F) inlet and ¾” BSP (M) outlet.
Marking:
Eltek, Flow arrow, Water block and Minimum flow rate on body.
Installation Requirements:
R001 R008
Expiry date:
28/02/2030
Model:
100041XX. Where ‘xx’ denotes the setting notches regulation and packaging type to either a ‘0’ or ‘9’.

Approval Holder:
Eltek SpA
Company Name
Eltek SpA
Address
Strada Valenza 5/A Casale Monferrato
Postcode
15033
Country
Italy
Phone
+39 0142 335511
General Email
f.ruzzafante@eltekgroup.it

View All Listings by this Company

Print This Approval


#250604002

Range of manually operated balancing valves (DZR Brass body). Maximum working pressure 20.0 bar. Maximum operating temperature 99ºC.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
250604002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SEE MODELS
Marking:
VIR, flow arrow, size & CR on Body. VIR mould on cap.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
IG.9525 - Lowflow ½”, ½”, ¾” & 1” BSP (F). FIG.9535 - Lowflow ½”, ½”, ¾” & 1” BSP (F). FIG.9522 - Lowflow ½”, ½” & ¾” BSP (F).

Approval Holder:
Taizhou VIR Valve Manufacturing Co., Ltd
Company Name
Taizhou VIR Valve Manufacturing Co., Ltd
Address
Building 3, 1st Standard Workshop, Yuhuan Xuanmen Industry, Taizhou, Zhejiang
Country
China
General Email
157199723@qq.com

View All Listings by this Company

Print This Approval


#241255062

'Sigrafine® EK2239, EK2200, EK2230 & EK2240'. Grey coloured, compression moulded, phenolic resin impregnated carbon rings. For use with water up to 85°C.

Section:
5022 Carbon
Expiry date:
31/12/2029

Approval Holder:
SGL Carbon GmbH
Company Name
SGL Carbon GmbH
Address
Drachenburgstraße 1, 53170 Bonn
Country
Germany
Phone
+49 228 841 565 or +49 228 841 538
General Email
Mischa.Ohnesorge@sglgroup.com

View All Listings by this Company

Print This Approval


#2207550

'EVER-SRC-1'. Factory applied, grey coloured Sulphate Resistant cement. Mix cement and sand in a 2:1 mass ratio. Apply as per manufacturer's instruction sheet '2024-09-10', revision 'A0'. Steam cure for 8 hours@50°C. For use with water up to 65°C.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2207550
Expiry date:
31/07/2027

Approval Holder:
Yingkou Economic and Technologic Development Zone Ever Foundry Co., Ltd.
Company Name
Yingkou Economic and Technologic Development Zone Ever Foundry Co., Ltd.
Address
Hongqi Industrial Park of Hongqi Town, Bayuquan Zone, Yingkou City, Liaoning Province
Country
China

View All Listings by this Company

Print This Approval


#250255015

'EP015-UTB'. Factory applied, blue coloured epoxy powder coating. Apply as per manufacturer's instructions reference 'PR-CA-00-024' dated 15-02-19. Cure for 15 minutes@200°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250255015
Expiry date:
28/02/2030

Approval Holder:
Utebagua S.L.U.
Company Name
Utebagua S.L.U.
Address
Poligono Industrial La Casaza, C/Estonia, Nave 10, 50180 Utebo (Zaragoza)
Country
Spain

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 707 of 825

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.