Directory Search Results

Print List

#2009337

Range of compression fittings with polypropylene bodies, nuts, acetal grip rings, EPDM ‘O’-rings and plastic pipe liners for use with MDPE pipe manufactured to BS EN 12201. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1160 Fittings for use with Tube and Pipe
Section Subtitle:
Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2009337
Note:
The supplied pipe liners must be installed to maintain the validity of this approval.
Size:
20-63mm compression. ½”-2” BSP (M) or (F)
Marking:
Manufacturers name, size and date of manufacture (clock format) on body.
Installation Requirements:
R001
Expiry date:
30/09/2025
Model:
Couplers: 20.41.2005.020: 20mm 20.41.2005.025: 25mm 20.41.2005.032: 32mm 20.41.2005.040: 40mm 20.41.2005.050: 50mm 20.41.2005.063: 63mm Reducing Couplers: 20 41 2007 005: 25mm x 20mm 20 41 2007 009: 32mm x 20mm 20 41 2007 010: 32mm x 25mm 20 41 2007 015: 40mm x 32mm 20 41 2007 019: 50mm x 32mm 20 41 2007 020: 50mm x 40mm 20 41 2007 023: 63mm x 32mm 20 41 2007 024: 63mm x 40mm 20 41 2007 025: 63mm x 50mm Male Adaptors - Male BSP Thread: 20 41 2037 005: 20mm x ½” 20 41 2037 010: 20mm x ¾” 20 41 2037 011: 20mm x 1” 20 41 2037 015: 25mm x ½” 20 41 2037 020: 25mm x ¾” 20 41 2037 025: 25mm x 1” 20 41 2037 030: 32mm x ¾” 20 41 2037 035: 32mm x 1” 20 41 2037 040: 32mm x 1¼ 20 41 2037 042: 40mm x 1” 20 41 2037 045: 40mm x 1¼” 20 41 2037 046: 40mm x 1½” 20 41 2037 049: 50mm x 1¼” 20 41 2037 050: 50mm x 1½” 20 41 2037 052: 50mm x 2” 20 41 2037 053: 63mm x 1½” 20 41 2037 055: 63mm x 2” Female Adaptors - Female BSP Thread: 20 41 2065 005: 20mm x ½” 20 41 2065 010: 20mm x ¾” 20 41 2065 019: 25mm x ½” 20 41 2065 020: 25mm x ¾” 20 41 2065 022: 25mm x 1” 20 41 2065 033: 32mm x ½” 20 41 2065 034: 32mm x ¾” 20 41 2065 035: 32mm x 1” 20 41 2065 036: 32mm x 1¼” 20 41 2065 044: 40mm x 1” 20 41 2065 045: 40mm x 1¼” 20 41 2065 046: 40mm x 1½” 20 41 2065 049: 50mm x 1¼” 20 41 2065 050: 50mm x 1½” 20 41 2065 051: 50mm x 2” 20 41 2065 054: 63mm x 1½” 20 41 2065 055: 63mm x 2” Elbow 90°: 20 41 2001 020: 20mm 20 41 2001 025: 25mm 20 41 2001 032: 32mm 20 41 2001 040: 40mm 20 41 2001 050: 50mm 20 41 2001 063: 63mm Elbow 90° Female BSP Thread: 20 41 2002 005: 20mm x ½’ 20 41 2002 006: 20mm x ¾” 20 41 2002 009: 25mm x ½” 20 41 2002 010: 25mm x ¾” 20 41 2002 011: 25mm x 1” 20 41 2002 013: 32mm x ¾” 20 41 2002 015: 32mm x 1” 20 41 2002 019: 40mm x 1” 20 41 2002 020: 40mm x 1¼” 20 41 2002 025: 50mm x 1½” 20 41 2002 026: 50mm x 2” 20 41 2002 030: 63mm x 2” Elbow 90° Male BSP Thread: 20 41 2085 005: 20mm x ½” 20 41 2085 006: 20mm x ¾” 20 41 2085 009: 25mm x ½” 20 41 2085 010: 25mm x ¾” 20 41 2085 011: 25mm x 1” 20 41 2085 014: 32mm x ¾” 20 41 2085 015: 32mm x 1” 20 41 2085 016: 32mm x 1¼” 20 41 2085 019: 40mm x 1” 20 41 2085 020: 40mm x 1¼” 20 41 2085 021: 40mm x 1½” 20 41 2085 022: 40mm x 2” 20 41 2085 022: 50mm x 1¼” 20 41 2085 025: 50mm x 1½” 20 41 2085 026: 50mm x 2” 20 41 2085 029: 63mm x 1½” 20 41 2085 030: 63mm x 2” Tee Male BSP Threaded: 20 41 2086 005: 20mm x ½” 20 41 2086 006: 20mm x ¾” 20 41 2086 009: 25mm x ½” 20 41 2086 010: 25mm x ¾” 20 41 2086 011: 25mm x 1” 20 41 2086 014: 32mm x ¾” 20 41 2086 015: 32mm x 1” 20 41 2086 019: 40mm x 1” 20 41 2086 020: 40mm x 1¼” 20 41 2086 021: 40mm x 1½” 20 41 2086 025: 50mm x 1½” 20 41 2086 026: 50mm x 2” 20 41 2086 030: 63mm x 2” Tee Female BSP Threaded: 20 41 2004 005: 20mm x ½” 20 41 2004 006: 20mm x ¾” 20 41 2004 009: 25mm x ½” 20 41 2004 010: 25mm x ¾” 20 41 2004 011: 25mm x 1” 20 41 2004 014: 32mm x ¾” 20 41 2004 015: 32mm x 1” 20 41 2004 019: 40mm x 1” 20 41 2004 020: 40mm x 1¼” 20 41 2004 021: 40mm x 1½” 20 41 2004 024: 50mm x 1¼” 20 41 2004 025: 50mm x 1½” 20 41 2004 026: 50mm x 2” 20 41 2004 030: 63mm x 2” Tee: 20 41 2003 020: 20mm 20 41 2003 025: 25mm 20 41 2003 032: 32mm 20 41 2003 040: 40mm 20 41 2003 050: 50mm 20 41 2003 063: 63mm Reducing Tee: 20 41 2004 104: 20 x 25 x 20mm 20 41 2004 105: 25 x 20 x 25mm 20 41 2004 110: 32 x 25 x 32mm 20 41 2004 115: 40 x 32 x 40mm 20 41 2004 118: 50 x 25 x 50mm 20 41 2004 119: 50 x 32 x 50mm 20 41 2004 120: 50 x 40 x 50mm 20 41 2004 122: 63 x 25 x 63mm 20 41 2004 123: 63 x 32 x 63mm 20 41 2004 124: 63 x 40 x 63mm 20 41 2004 125: 63 x 50 x 63mm End Cap: 20 41 2012 020: 20mm 20 41 2012 025: 25mm 20 41 2012 032: 32mm 20 41 2012 040: 40mm 20 41 2012 050: 50mm 20 41 2012 063: 63mm

Approval Holder:
Plimat (UK) Ltd
Company Name
Plimat (UK) Ltd
Address
Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton
Postcode
SO40 9LX
Phone
0845 055 9022

View All Listings by this Company

Print This Approval


#2007004

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007004
Size:
See model
Marking:
Size and DOZ on body
Installation Requirements:
R001
Expiry date:
31/07/2025
Model:
End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer
Product Images

Approval Holder:
Hangzhou Doz Import & Export Co Ltd
Company Name
Hangzhou Doz Import & Export Co Ltd
Address
Room 302, Binke Mansion, No 1503 Xipu Road Binjiang District, Hangzhou
Country
Zhejiang,

View All Listings by this Company
Manufacturer:
Hangzhou Doz Import & Export Co Ltd
Company Name
Hangzhou Doz Import & Export Co Ltd
Address
Room 302, Binke Mansion, No 1503 Xipu Road Binjiang District, Hangzhou
Country
Zhejiang,

View All Listings by this Company

Print This Approval


#2007027

Range of rigid ductile iron couplings (copper colored alkyd enamel) (Style 606-EN), Vic-flange adapter’s (Style 641-EN) and grooved copper fittings (No. 610, 611, 620, 625, 650 & 660 –EN) for use with grooved copper tubing (manufactured to EN 1057 R250). Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007027
Size:
See model
Marking:
Victaulic, size, model number and technical info on body and clamping rings.
Installation Requirements:
R001
Expiry date:
31/07/2025
Model:
Style 606-EN, Rigid Coupling for Copper: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. Style 641-EN, Copper flange Adapter: 54mm, 66.7mm, 76.1mm (4xM16), 76.1mm (8xM16), 108mm, 133mm & 159 mm. No. 610-EN, 90° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133m & 159 mm. No. 611-EN, 45° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 620-EN, Copper Tee: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 625-EN, Copper Reducing Tee: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm & 159mm x 108mm. No. 650-EN, Copper Concentric Reducer: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm, 133mm x 108mm, 159mm x 108mm & 159 x 133 mm. No. 660-EN, Copper End Cap: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm.
Product Images

Approval Holder:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

Print This Approval


#2007079

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007079
Size:
See model
Marking:
Size and Flomasta on body
Installation Requirements:
R001
Expiry date:
31/07/2025
Model:
End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2009338

“Plimat ABS Fittings BS Inch and ABS Adaptor Fittings” range of ABS solvent cement or threaded fittings for use with “Plimat ABS pipe”. Maximum working pressure: 15.0 bar (fittings with ½” - 4” solvent cement connections), 9.0 bar (fittings with 5” or 6” solvent cement connections, with or without threaded connecitons), and 10.0 bar (fittings with threaded connections and ½” - 4” solvent cement connections). Cold water and above ground use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2009338
Size:
See model
Marking:
Plimat, size and material on shoulder of fitting. Plimate, size, ABS class, pressure rating, BS5391 and line no. on pipe.
Installation Requirements:
R001
Expiry date:
30/09/2025
Model:
Elbow 90° Plain Inch: ½” ABSGOP0200, ¾” ABSGOP0250, 1” ABSGOP0320, 1¼” ABSGOP0400, 1½” ABSGOP0500, 2” ABSGOP0630, 2½” ABSGOP0750, 3” ABSGOP0900, 4” ABSGOP1100, 5” ABSGOP1400, 6” ABSGOP1600. Elbow 45° Plain Inch: ½” ABSGYP0200, ¾” ABSGYP0250, 1” ABSGYP0320, 1¼” ABSGYP0400, 1½” ABSGYP0500, 2” ABSGYP0630, 2½” ABSGYP0750, 3” ABSGYP0900, 4” ABSGYP1100, 5” ABSGYP1400, 6” ABSGYP1600. Socket Plain Inch: ½” ABSMAP0200, ¾” ABSMAP0250, 1” ABSMAP0320, 1¼” ABSMAP0400, 1½” ABSMAP0500, 2” ABSMAP0630, 2½” ABSMAP0750, 3” ABSMAP0900, 4” ABSMAP1100, 5” ABSMAP1400, 6” ABSMAP1600. Tee Plain Inch: ½” ABSTIP0200, ¾” ABSTIP0250, 1” ABSTIP0320, 1¼” ABSTIP0400, 1½” ABSTIP0500, 2” ABSTIP0630, 2½” ABSTIP0750, 3” ABSTIP0900, 4” ABSTIP1100, 5” ABSTIP1400, 6” ABSTIP1600. Cap Plain Inch: ½” ABSCAP0200, ¾” ABSCAP0250, 1” ABSCAP0320, 1¼” ABSCAP0400, 1½” ABSCAP0500, 2” ABSCAP0630, 2½” ABSCAP0750, 3” ABSCAP0900, 4” ABSCAP1100, 6” ABSCAP1600. Bend 90° Plain Inch: ½” ABSCUP0200, ¾” ABSCUP0250, 1” ABSCUP0320, 1¼” ABSCUP0400, 1½” ABSCUP0500, 2” ABSCUP0630, 2½” ABSCUP0750, 3” ABSCUP0900, 4” ABSCUP1100. Union Plain Inch: ½” ABSBOP0200, ¾” ABSBOP0250, 1” ABSBOP0320, 1¼” ABSBOP0400, 1½” ABSBOP0500, 2” ABSBOP0630, 2½” ABSBOP0750, 3” ABSBOP0900, 4” ABSBOP1100. Reducer Plain Inch: ¾” x ½” ABSRCP025B, 1” x ½” ABSRCP032B, 1” x ¾” ABSRCP032C, 1¼” x 1” ABSRCP040D, 1½” x ¾” ABSRCP050C, 1½” x 1” ABSRCP050D, 1½” x 1¼” ABSRCP050E, 2” x 1” ABSRCP063D, 2” x 1¼” ABSRCP063E, 2” x 1½” ABSRCP063F, 2½” x 1½” ABSRCP075F, 2½” x 2” ABSRCP075G, 3” x 1½” ABSRCP090F, 3” x 2” ABSRCP090G, 3” x 2½” ABSRCP090H, 4” x 2” ABSRCP110G, 4” x 3” ABSRCP110I, 5” x 4” ABSRCP140L, 6” x 4” ABSRCP160L. Stub Flange Plain Inch: 1” ABSQRP0320, 1¼” ABSQRP0400, 1½” ABSQRP0500, 2” ABSQRP0630, 2½” ABSQRP0750, 3” ABSQRP0900, 4” ABSQRP1100, 5” ABSQRP1400, 6” ABSQRP1600. Full Faced Flange Plain Inch: ½” ABSFNP0200, ¾” ABSFNP0250, 1” ABSFNP0320, 1¼” ABSFNP0400, 1½” ABSFNP0500, 2” ABSFNP0630, 2½” ABSFNP0750, 3” ABSFNP0900, 4” ABSFNP1100. Blanking Flange Plain Inch: ½” ABSFCP0200, ¾” ABSFCP0250, 1” ABSFCP0320, 1¼” ABSFCP0400, 1½” ABSFCP0500, 2” ABSFCP0630, 2½” ABSFCP0750, 3” ABSFCP0900, 4” ABSFCP1100, 6” ABSFCP1600. Elbow 90° Plain - Female Threaded BSP: ½” ABSGOC0200, ¾” ABSGOC0250, 1” ABSGOC0320, 1¼” ABSGOC0400, 1½” ABSGOC0500, 2” ABSGOC0630, 3” ABSGOC0900. Tee Plain - Female Threaded BSP: ½” ABSTIC0200, ¾” ABSTIC0250, 1” ABSTIC0320, 1¼” ABSTIC0400, 1½” ABSTIC0500, 2” ABSTIC0630, 3” ABSTIC0900. Socket Plain - Female Threaded BSP: ½” ABSMAC0200, ¾” ABSMAC0250, 1” ABSMAC0320, 1¼” ABSMAC0400, 1½” ABSMAC0500, 2” ABSMAC0630, 3” ABSMAC0900, 4” ABSMAC1100. Socket Plain - Male Threaded BSP: ½” ABSAMC0200, ¾” ABSAMC0250, 1” ABSAMC0320, 1¼” ABSAMC0400, 1½” ABSAMC0500, 2” ABSAMC0630, 3” ABSAMC0900, 4” ABSAMC1100. Male Spigot Plain - Female Threaded BSP: ½” ABSAFC0200, ¾” ABSAFC0250, 1” ABSAFC0320, 1¼” ABSAFC0400, 1½” ABSAFC0500, 2” ABSAFC0630. Reducing Bush Plain Male - Female Threaded BSP: ½” x ⅜” ABSRCC020A, ¾” x ½” ABSRCC025B, 1” x ¾” ABSRCC032C. Composite Union Plain Female - Female Brass Threaded BSP: ½” ABSBFC0200, ¾” ABSBFC0250, 1” ABSBFC0320, 1¼” ABSBFC0400, 1½” ABSBFC0500, 2” ABSBFC0630, 2½” ABSBFC0750, 3” ABSBFC0900. Composite Union Plain Female - Male Brass Threaded BSP: ½” ABSBMC0200, ¾” ABSBMC0250, 1” ABSBMC0320, 1¼” ABSBMC0400, 1½” ABSBMC0500, 2” ABSBMC0630, 2½” ABSBMC0750, 3” ABSBMC0900. Tank Connector Plain - Male Threaded BSP: ½” ABSTCC0200, ¾” ABSTCC0250, 1” ABSTCC0320, 1¼” ABSTCC0400, 1½” ABSTCC0500, 2” ABSTCC0630, 2½” ABSTCC0750, 3” ABSTCC0900, 4” ABSTCC1100. Barrel Nipple Plain - Male Threaded BSP: ⅜” ABSBNC0160, ½” ABSBNC0200, ¾” ABSBNC0250, 1” ABSBNC0320, 1¼” ABSBNC0400, 1½” ABSBNC0500, 2” ABSBNC0630, 2½” ABSBNC0750, 3” ABSBNC0900, 4” ABSBNC1100. Barrel Nipple Threaded BSP: ½” ABSBAF0200, ¾” ABSBAF0250, 1” ABSBAF0320, 1¼” ABSBAF0400, 1½” ABSBAF0500, 2” ABSBAF0630, 2½” ABSBAF0750, 3” ABSBAF0900, 4” ABSBAF1100. Back Nuts Threaded BSP: ½” ABSNUF0200, ¾” ABSNUF0250, 1” ABSNUF0320, 1¼” ABSNUF0400, 1½” ABSNUF0500, 2” ABSNUF0630, 2½” ABSNUF0750, 3” ABSNUF0900, 4” ABSNUF1100. Pipe 9 bar: 1” ABSCLC0320, 1¼” ABSCLC0400, 1½” ABSCLC0500, 2” ABSCLC0630, 2½” ABSCLC0750, 3” ABSCLC0900, 4” ABSCLC1100, 6” ABSCLC1600. Pipe 15 Bar: ½” ABSCLE0200, ¾” ABSCLE0250, 1” ABSCLE0320, 1¼” ABSCLE0400, 1½” ABSCLE0500, 2” ABSCLE0630, 3” ABSCLE0900, 4” ABSCLE1100.

Approval Holder:
Plimat (UK) Ltd
Company Name
Plimat (UK) Ltd
Address
Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton
Postcode
SO40 9LX
Phone
0845 055 9022

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 8 of 830

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.