Directory Search Results

Print List

#2104028

WC dual flush drop valve comprising of a plastic body and silicone seating washer. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2104028
Size:
2” BSP (M)
Marking:
Model and UNITOP logo (‘Unitop’, where the ‘o’ is a water droplet) on valve body.
Installation Requirements:
R001 R571
Expiry date:
30/04/2026
Model:
A31-04
Product Images

Approval Holder:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968

View All Listings by this Company
Manufacturer:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968

View All Listings by this Company

Print This Approval


#2105006

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2105006
Size:
B4920DSM-U/DHH-U models: 2” U clamp fitting. B4920DSM-G/DHH-G models: 2” BSP (M).
Marking:
Trademark WDI, series number and Eco on valve body.
Installation Requirements:
R001 R571
Expiry date:
31/05/2026
Model:
B4920DSM-U. B4920DSM-G. B4920DHH-U. B4920DHH-G.
Product Images

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2105007

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2105007
Size:
B4910-U/T-U models: 2” U clamp fitting. B4910-G/T-G models: 2” BSP (M).
Marking:
Trademark WDI, series number and Eco on valve body.
Installation Requirements:
R001 R571
Expiry date:
31/05/2026
Model:
B4910-U. B4910-G. B4910T-U. B4910T-G.
Product Images

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#2105012

Range of WC dual flush drop valve with plastic body silicone rubber seal and NBR rubber ‘O’-ring. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2105012
Size:
2” BSP (M)
Marking:
Fluidmaster on body. 800 series on platform under operating member.
Installation Requirements:
R001 R571
Expiry date:
31/05/2026
Model:
820WB-FIF-002. 820WB-FIF-003. 820WB-FIF-004. 820F-001. 820F-013. 30082. 25-5151. 25-5151-01. 25-5278. 25-5293
Product Images

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2011035

Range of indirect heat interface units with copper brazed stainless-steel heat exchangers, providing heating and instantaneous hot water. The products incorporate an expansion vessel on the cold-water supply to the plate heat exchanger and a safety relief valve on the space heating circuit set @ 3.0 bar. The domestic hot water and space heating circuit are both fitted with drain valves incorporating cover caps. Maximum working pressures: Domestic hot water 10.0 bar. Space Heating 2.5 bar. District Heating 3.0 bar. Maximum operating temperature 85˚C.

Section:
1350 Heat Exchangers
WRAS Approval Number:
2011035
Note:
There are no pipework connections on this product to facilitate the filling of the space heating circuit. The installer must provide this separately.
Size:
Domestic hot water and District heating circuits: ¾” BSP (M) inlet/outlet. Space heating circuit: ¾” BSP captive nut inlet/outlet.
Marking:
YGHP on front cover. YGHP, model number, company address and technical info on adhesive label on side of body.
Installation Requirements:
R001 R140 R360 R511
Expiry date:
30/11/2025
Proviso:
Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Model:
YGINDRADSTD33/10.1 - YGHP INDIRECT STANDARD HIU (RADIATORS) - DHW 33kW / HTG 10kW. YGINDRADSTD40/10.1 - YGHP INDIRECT STANDARD HIU (RADIATORS) - DHW 40kW / HTG 10kW. YGINDRADSTD50/10.1 - YGHP INDIRECT STANDARD HIU (RADIATORS) - DHW 50kW / HTG 10kW. YGINDRADSTD60/10.1 - YGHP INDIRECT STANDARD HIU (RADIATORS) - DHW 60kW / HTG 10kW. YGINDRADSTD75/10.1 - YGHP INDIRECT STANDARD HIU (RADIATORS) - DHW 75kW / HTG 10kW. YGINDRADSTD90/10.1 - YGHP INDIRECT STANDARD HIU (RADIATORS) - DHW 90kW / HTG 10kW. YGINDRADSTD120/10.1 - YGHP INDIRECT STANDARD HIU (RADIATORS) - DHW 120kW / HTG 10kW. Models added March 2021: YGINDUFHSTD33/10.1 - YGHP INDIRECT STANDARD HIU (UFH) - DHW 33kW / HTG 10kW YGINDUFHSTD40/10.1 - YGHP INDIRECT STANDARD HIU (UFH) - DHW 40kW / HTG 10kW YGINDUFHSTD50/10.1 - YGHP INDIRECT STANDARD HIU (UFH) - DHW 50kW / HTG 10kW YGINDUFHSTD60/10.1 - YGHP INDIRECT STANDARD HIU (UFH) - DHW 60kW / HTG 10kW YGINDUFHSTD75/15.1 - YGHP INDIRECT STANDARD HIU (UFH) - DHW 75kW / HTG 15kW YGINDUFHSTD90/15.1 - YGHP INDIRECT STANDARD HIU (UFH) - DHW 90kW / HTG 15kW YGINDUFHSTD120/30.1 - YGHP INDIRECT STANDARD HIU (UFH) - DHW 120kW / HTG 30kW
Product Images

Approval Holder:
YGHP Ltd
Company Name
YGHP Ltd

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 8 of 192

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.