Directory Search Results

Print List

#2211057

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating ceramic cartridge headworks and single lever operating members. The spout outlet is a pull-out spray type. The spout inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow prevention. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2211057
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP captive nut
Marking:
Cooke & Lewis & date of manufacture MM/YY on body
Installation Requirements:
R001 R009 R090
Expiry date:
30/11/2027
Model:
3663602929956, 3663602929963 & 5059340504360 (stainless steel Brushed)

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2211060

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2211060
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.
Marking:
Cooke & Lewis & Date of manufacture MM/YYYY on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2027
Model:
3663602930662
Product Images

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2303035

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (model M101086) or 85°C (all other models).

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2303035
Size:
Stainless steel braided EPDM lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Omasa on operating member, WRAS on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2028
Model:
M101086, M101076, M101071, M101085, M102071.
Product Images

Approval Holder:
KAIPING OMASA SANITARY WARE INDUSTRY CO., LTD
Company Name
KAIPING OMASA SANITARY WARE INDUSTRY CO., LTD
Address
NO.65 LONGTANG XI RD. SHUIKOU TOWN, KAIPING CITY GUANGDONG,CHINA

View All Listings by this Company

Print This Approval


#2303036

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with lever type pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature (See models)

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2303036
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 3/8" BSP (F) captive nut end connections
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R006 R009
Expiry date:
31/03/2028
Model:
31060XXX with pop-up waste set (60°C) 31063XXX with pop-up waste set (60°C) 31068XXX without waste set (70°C) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2303324

Range of single hole, single outlet fixed combination tap assemblies, (chrome plated brass bodies), incorporating a ceramic cartridge headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Models (63301, 63501, 63303, 63503, 63305 & 63505 are supplied with lever operated pop-up waste) Maximum working pressure 5 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2303324
Size:
Stainless steel braided PEX lined flexible hoses with 3/8” captive nut end connections. 3/8” BSP (M) x ½” (F) adaptor
Marking:
Gessi logo etched on handle
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2028
Model:
63301 (anello) with waste 63302 (anello) 63501 (ingranaggio) with waste 63502 (ingranaggio) 63303 (anello) with waste 63304 (anello) 63503 (ingranaggio) with waste 63504 (ingranaggio) 63305 (anello) with waste 63306 (anello) 63505 (ingranaggio) with waste 63506 (ingranaggio)
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 700 of 1707

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.