'Maxline 100 Potable Water Coating Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDSMLI100.rv5.04042023'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205574

Expiry date:

31/05/2027

Approval Holder:

Maxkote Ltd.

Company Name

Maxkote Ltd.

Address

Clifton Moor, York

Postcode

YO30 4XL

Phone

+44 1904 809 773

General Email

info@maxkote.co.uk

View All Listings by this Company

'Denyl 66 3010 Natural F' & 'Denyl 66 3010 Black F'. Natural (appears off-white) and black coloured, injection moulded, Polyamide 66 materials. For use with water up to 65°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2303538

Expiry date:

31/03/2028

Approval Holder:

Vamp-Tech S.p.A

Company Name

Vamp-Tech S.p.A

Address

Via delle Industrie 10/12, Busnago (MB), 20874

Country

Italy

View All Listings by this Company

'ULTRADUR B4300 GK24 HR FC AQUA GREY 35413'. Grey coloured, injection moulded PBT material. For use with water up to 85°C.

Section:

5205 Polybutylene Terephthalate

Expiry date:

31/03/2028

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'TEGA PE100 fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 60°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2303531

Expiry date:

31/03/2028

Approval Holder:

Tega Muhendislik Sanayi & Ticaret A.S. (Tega Engineering Industry & Trade Inc.)

Company Name

Tega Muhendislik Sanayi & Ticaret A.S. (Tega Engineering Industry & Trade Inc.)

Address

1. OSB Ural Caddesi, No:9 06930, Sincan/Ankara

Country

Turkey

View All Listings by this Company

'DERINSU PE100 Fitting'. Black coloured, injection moulded PE100 fitting. For use with water up to 60°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2304509

Expiry date:

30/04/2028

Approval Holder:

Derinsu Boru Ekparca Ve Makine Hafr. Ins. Tafr. Ins. Taah. Hird. Tic. Ve San. Ltd. Sti.

Company Name

Derinsu Boru Ekparca Ve Makine Hafr. Ins. Tafr. Ins. Taah. Hird. Tic. Ve San. Ltd. Sti.

Address

Yenidogan Mh. Demirciler Sitesi 2108, Sk. No:22, Yuregir, TR-01 01310

Country

Turkey

View All Listings by this Company