BASF SE Approvals

#1912504

'Ultrason® S2010 G4 Schwarz 15038'. Black coloured, injection moulded polysulphone material. For use with water up to 85°C.

Section:
5280 Polysulphone
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
1912504
Expiry date:
31/12/2024
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2003523

'Ultrason P 3010 MR grau 30373'. Grey coloured, injection moulded PPSU material. For use with water up to 85°C.

Section:
5256 Polyphenylsulfone
WRAS Approval Number:
2003523
Expiry date:
31/03/2025
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2011506

'Ultramid S3EG6 Balance Aqua Uncoloured'. Uncoloured (appears beige), injection moulded PA6/10 material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2011506
Expiry date:
30/11/2025
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2201500

'Ultrason® S3010 Natural'. Natural (beige coloured), injection moulded polysulphone material. For use with water up to 85°C.

Section:
5280 Polysulphone
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2201500
Expiry date:
31/01/2027
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2201501

'Ultrason® S2010 Natural'. Natural (colourless), injection moulded polysulphone material. For use with water up to 85°C.

Section:
5280 Polysulphone
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2201501
Expiry date:
31/01/2027
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2107532

'Ultradur® B4300 G6 HR FC Aqua grey 35413 '. Grey coloured, injection moulded PBT material. For use with water up to 65°C.

Section:
5205 Polybutylene Terephthalate
WRAS Approval Number:
2107532
Expiry date:
31/07/2026
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2111507

'Ultramid A3EG7 FC Aqua Uncoloured'. Natural (appears beige), injection moulded, PA66 polyamide material. For use with water up to 65°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2111507
Expiry date:
30/11/2026
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2201504

'Ultramid® B3EG7 black 00564' (Black coloured) & 'Ultramid® B3EG7 uncolored' (appears beige). Injection moulded nylon materials. 'Ultramid® B3EG7 uncolored' is for use with water up to 65°C. 'Ultramid® B3EG7 black 00564' is for use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2201504
Expiry date:
31/01/2027
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2203533

'Ultrason E 6020 P Natural'. 'Ultrason E2010 G6 Uncoloured’ was added to the approval in September 2022. Natural (appears yellow/brown), injection moulded PESU materials. For use with water up to 85°C.

Section:
5225 Polyethersulphone
Section Subtitle:
Material only. Components made from products listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2203533
Expiry date:
31/03/2027
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval

#2204508

‘Ultramid® A3EG10 FC Aqua Black 23285’. Black coloured, injection moulded PA66 material. For use with water up to 85°C.

Section:
5180 Nylon
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204508
Expiry date:
30/04/2027
Approval Holder:
BASF SE
Company Name
BASF SE
Address
Carl-Bosch-Str. 38, 67056 Ludwigshafen

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 1 of 3

© WRAS 2024 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.