Directory Search Results

Print List

#250202701

`Water block` range of self-closing valves with either a natural (white), blue or grey plastic body and a gear driven volume-controlled operation device. The product incorporates a stainless-steel strainer. The product is designed to stop the flow of water once a preset value (in litres) has been reached. User intervention is then required to reset it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2335 Valves
Section Subtitle:
Stop, plastic, self-closing.
WRAS Approval Number:
250202701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R008 only applies to the natural (white) body version. The self-closing function once a pre-set value has been reached has not been assessed and is not considered to be covered by the scope of this approval.
Size:
¾” BSP (F) inlet and ¾” BSP (M) outlet.
Marking:
Eltek, Flow arrow, Water block and Minimum flow rate on body.
Installation Requirements:
R001 R008
Expiry date:
28/02/2030
Model:
100041XX. Where ‘xx’ denotes the setting notches regulation and packaging type to either a ‘0’ or ‘9’.

Approval Holder:
Eltek SpA
Company Name
Eltek SpA
Address
Strada Valenza 5/A Casale Monferrato
Postcode
15033
Country
Italy
Phone
+39 0142 335511
General Email
f.ruzzafante@eltekgroup.it

View All Listings by this Company

Print This Approval


#250604002

Range of manually operated balancing valves (DZR Brass body). Maximum working pressure 20.0 bar. Maximum operating temperature 99ºC.

Section:
2348 Valves
Section Subtitle:
Balancing.
WRAS Approval Number:
250604002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SEE MODELS
Marking:
VIR, flow arrow, size & CR on Body. VIR mould on cap.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
IG.9525 - Lowflow ½”, ½”, ¾” & 1” BSP (F). FIG.9535 - Lowflow ½”, ½”, ¾” & 1” BSP (F). FIG.9522 - Lowflow ½”, ½” & ¾” BSP (F).

Approval Holder:
Taizhou VIR Valve Manufacturing Co., Ltd
Company Name
Taizhou VIR Valve Manufacturing Co., Ltd
Address
Building 3, 1st Standard Workshop, Yuhuan Xuanmen Industry, Taizhou, Zhejiang
Country
China
General Email
157199723@qq.com

View All Listings by this Company

Print This Approval


#241104712

Range of inline water meter kits incorporating brass bodies, a spherical valve and drain off valve. For use with copper pipe (manufactured to BS EN 1057:1996). Maximum working pressure 10.0 bar. Cold water use only.

Section:
4001 Components and accessories
Section Subtitle:
Water meters.
WRAS Approval Number:
241104712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm & 22mm crimped connections. 15mm & 22 compression.
Marking:
BZUK on body
Installation Requirements:
R001 R110 R511
Expiry date:
30/11/2029
Model:
BZMKC15(VE) 15mm Inline Meter Kit Compression. BZMKC22(VE) 20mm Inline Meter Kit Compression. BZMKP15(VE) 15mm Inline Meter Kit Crimp. BZMKP22(VE) 20mm Inline Meter Kit Crimp.
Product Images

Approval Holder:
Bayzone Holdings Pty Ltd
Company Name
Bayzone Holdings Pty Ltd
Address

View All Listings by this Company

Print This Approval


#241255014

'FORMOCON FM090'. White coloured, injection moulded POM material. For use with water up to 85°C.

Section:
5015 Acetal
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255014
Expiry date:
31/12/2029

Approval Holder:
Formosa Plastics Corporation
Company Name
Formosa Plastics Corporation
Address
3 Chung-Yang Industrial Park, Hsin-Kang, Chiayi Hsien
Country
Taiwan

View All Listings by this Company

Print This Approval


#241255017

'FORMOCON FM090LMD'. White coloured, injection moulded POM material. For use with water up to 85°C.

Section:
5015 Acetal
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241255017
Expiry date:
31/12/2029

Approval Holder:
Formosa Plastics Corporation
Company Name
Formosa Plastics Corporation
Address
3 Chung-Yang Industrial Park, Hsin-Kang, Chiayi Hsien
Country
Taiwan

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 683 of 857

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.