Deck mounted spout outlet with chromium plated brass body. The inlet incorporates a plastic flow regulator, and the spout outlet incorporates a plastic flow straightener with an integral strainer. Maximum working pressure: Open Outlet. Maximum operating temperature 60.0°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240502023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Dornbracht on base of spout.

Installation Requirements:

R001 R006

Expiry date:

31/05/2029

Model:

13630740

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Wall mounted spout with a brass body (various finishes) and a brass rough kit incorporating a stainless-steel strainer and a plastic flow regulator on the inlet of the spout. Open outlet use only. Maximum operating temperature: 60.0°C (10 942 xx0) and 80.0°C (10 941 180)

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240502046

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) (10 942 xx0) and ¾” BSP (F) (10 941 180)

Marking:

AXOR on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

10 942 xx0 (Spout) 10 941 180 (Rough Kit) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of horizontal and vertical expansion vessels with EPDM membrane and stainless-steel connections. Maximum working pressure: 8.0 bar (35 litre model); 10.0 bar (50 litre up to 400 litre models).

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) 35 litre model, 1” BSP (M) 50 litre up to 100 litre models, 1 ½” BSP (M) 150 litre up to 400 litre models.

Marking:

VAREM, year of production, model, volume, PN and further product information on adhesive label.

Installation Requirements:

R001 R535

Expiry date:

30/11/2028

Model:

Maxivarem LC: UC035 (35 litres), UC050 (50 litres), UC060 (60 litres), UC080 (80 litres), UC100 (100 litres), UC150 (150 litres), UC200 (200 litres), UC250 (250 litres), UC300 (300 litres), UC400 (400 litres).

Approval Holder:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Manufacturer:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Range of inline filter cartridges with plastic or chromium plated brass bodies. Models 02-803231, 02-803235 & 02-803236 incorporate a plastic flow regulator, stainless steel filter and and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides adequate backflow protection. Model 02-000242 is a replacement filter for 02-803236 Chrome In-line filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1055 Filter Cartridges

WRAS Approval Number:

2312330

Note:

These products have not been tested or approved for claims of antimicrobial properties made by the approval holder. IRN R008 applies to model 02-000242 only.

Size:

½” BSP (M)

Marking:

T-Safe. Flow arrow and PN on body of plastic units.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/12/2028

Proviso:

The models listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The products have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.

Model:

02-803231 Medical In-Line filter. 02-803235 Sterile Medical In-Line filter. 02-803236 Chrome In-line filter. 02-000242 Replacement filter for 02-803236 Chrome In-line filter.

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of press fittings and pipe. Fittings incorporate EPDM ‘O’-rings Maximum working pressure 10 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304373

Size:

SEE MODEL

Marking:

Manufacturers logo, TH and size on fitting. Logo and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

M-1-0101-TH 16mm M-1-0103-TH 20mm M-1-0109-TH 26mm M-1-0105-TH 32mm M-1-0106-TH 40mm M-1-0107-TH 50mm M-1-0202-TH 20 x 16mm M-1-0223-TH 26 x 16mm M-1-0225-TH 26 x 20mm M-1-0207-TH 32 x 20mm M-1-0227-TH 32 x 26mm M-1-0211-TH 40 x 20mm M-1-0228-TH 40 x 26mm M-1-0213-TH 40 x 32mm M-1-0229-TH 50 x 26mm M-1-0216-TH 50 x 32mm M-1-0217-TH 50 x 40mm M-1-0301-TH 1/2"M x 16mm M-1-0302-TH 3.4" M x 16mm M-1-0305-TH 1/2" M x 20mm M-1-0306-TH 3/4" M x 20mm M-1-0307-TH 1" M x 20mm M-1-0326-TH 1/2"M x 26mm M-1-0327-TH 3/4"M x 26mm M-1-0328-TH 1" M x 26mm M-1-0313-TH 1"M x 32mm M-1-0314-TH 1 1/4" x 32mm M-1-0317-TH 1 1/4" M x 40mm M-1-0320-TH 1 1/2" M x 50mm M-1-0321-TH 2" M x 50mm M-1-0401-TH 1/2" F x 16mm M-1-0402-TH 3/4" F x 16mm M-1-0408-TH 3/4" F x 20mm M-1-0409-TH 1" F x 20mm M-1-0422-TH 1/2" F x 26mm M-1-0423-TH 3/4" F x 26mm M-1-0424-TH 1" F x 26mm M-1-0415-TH 1" F x 32mm M-1-0408-TH 3/4" F x 20mm M-1-0422-TH 1 1/4" F x 40mm M-1-0419-TH 1 1/2" F x 50mm M-1-3101-TH 1/2" C x 16mm M-1-3104-TH 3/4" C x 20mm M-1-3102-TH 3/4" C x 16mm M-1-3110-TH 3/4" C x 26mm M-1-3111-TH 1" X x 26mm M-1-3113-TH 1" C x 32mm M-1-3301-TH 1/2" C x 16mm M-1-3304-TH 3/4" C x 20mm M-1-3302-TH 15mm C x 16mm M-1-3305-TH 22mm C x 20mm M-1-3401-TH 16mm x1/2" M-1-3402-TH 16mm x 15mm M-1-3403-TH 20mm x 3/4" M-1-3404-TH 20mm x 22mm M-1-3405-TH 26mm x 22mm M-1-3406-TH 26mm x 28mm M-1-3407-TH 26mm x 3/4" M-1-3408-TH 26mm x 1" M-1-3409-TH 32mm x 28mm M-1-0501-TH 16mm M-1-0503-TH 20mm M-1-0509-TH 26mm M-1-0505-TH 32mm M-1-0506-TH 40mm M-1-0507-TH 50mm M-1-3201-TH 16mm x 100mm M-1-3202-TH 16mm x 300mm M-1-0801-TH 1/2" M x 16mm M-1-0805-TH 1/2" M x 20mm M-1-0806-TH 3/4M x 20mm M-1-0813-TH 1" M x 20mm M-1-0816-TH 3/4" M x 26mm M-1-0817-TH 1"M x 26mm M-1-0812-TH 1"M x 32mm M-1-0814-TH 1 1/4" M x 32mm M-1-0901-TH 1/2" F x 16mm M-1-0901CP-TH 1/2" x 16mm CP M-1-0905-TH 1/2" F x 20mm M-1-0906-TH 3/4" F x 20mm M-1-0913-TH 1" F x 20mm M-1-0914-TH 1/2" F x 26mm M-1-0915-TH 3/4" F x 26mm M-1-0916-TH 1" F x 26mm M-1-0912-TH 1"F x 32mm M-1-0917-TH 1 1/4" x 32mm M-1-1101-TH 16mm M-1-1103-TH 20mm M-1-1109-TH 26mm M-1-1105-TH 32mm M-1-1106-TH 40mm M-1-1107-TH 50mm M-1-1202-TH 16 x 16 x 20 M-1-1210-TH 20 x 16 x 16 M-1-1219-TH 20 x 16 x 20 M-1-1207-TH 20 x 20 x 16 M-1-1253-TH 20 x 20 x 26 M-1-1260-TH 26 x 16 x 16 M-1-1246-TH 26 x 16 x 20 M-1-1241-TH 26 x 16 x 26 M-1-1248-TH 26 x 26 x 20 M-1-1243-TH 26 x 20 x 26 M-1-1261-TH 26 x 26 x 16 M-1-1249-TH 26 x 26 x 20 M-1-1259-TH 26 x 26 x 32 M-1-1240-TH 32 x 16 x 32 M-1-1242-TH 32 x 20 x 32 M-1-1262-TH 32 x 26 x 20 M-1-1258-TH 32 x 26 x 26mm M-1-1245-TH 32 x 26 x 32 M-1-1215-TH 32 x 32 x 16 M-1-1217-TH 32 x 32 x 20 M-1-1257-TH 32 x 32 x 26 M-1-1229-TH 40 x 40 x 20 M-1-1261-TH 40 x 40 x 26 M-1-1231-TH 40 x 40 x 32 M-1-1262-TH 50 x 50 x 26 M-1-1234-TH 50 x 50 x 32 M-1-1235-TH 50 x 50 x 40 M-1-1001-TH 1/2" F x 16mm M-1-1004-TH 1/2" F x 20mm M-1-3501 1/2" x 16mm M-1-3502 1/2" x 16mm CP M-1-3503 15mm x 16mm M-1-3504 15mm x 16mm CP M-1-3505 3/4" x 20mm M-1-3506 1" x 26mm M-1-3507 22mm x 20mm M-1-3508 28mm x 26mm M-1-3601-TH 1/2" x 16mm M-1-3602-TH 15mm x 16mm M-1-3603-TH 3/4" x 20mm M-1-3701-TH 16mm x 15mm M-1-3702-TH 20mm x 22mm M-1-3703-TH 26mm x 28mm M-1-3801-TH 16mm x 1/2" M-1-3802-TH 20mm x 3/4" M-1-3803-TH 26mm x 1" M-1-1301-TH 16 x 16 x 1/2"F M-1-1306-TH 20 x 20 x 3/4" F M-1-1331-TH 26 x 26 x 1" F M-1-1313-TH 32 x 32 x 1" F M-1-2601-TH 16mm M-1-2603-TH 20mm M-1-2606-TH 26mm M-1-2605-TH 32mm M-6-2901-TH 16mm

Approval Holder:

Zhejiang Mingshi Xingxin Hvac Technology Co., Ltd.

Company Name

Zhejiang Mingshi Xingxin Hvac Technology Co., Ltd.

Address

No.1-7 Fengye Road Diankou Town Zhuji City

Country

Zhejiang Province

Phone

0086-575-89006963

General Email

manager@ms-piping.com

View All Listings by this Company