Floor mounted, single outlet (swivel) combination tap assembly (brass bodies - various finishes), incorporating ceramic cartridge headworks with single lever operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 65.0°C.

Section:

0466 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)

WRAS Approval Number:

250702005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Coalbrook logo on back of spout

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2030

Model:

XX 2001 YY Model added January 2026: XX 2009 YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal BB = Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass body). Incorporating quarter turn ceramic disc headworks, dome type operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator or flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70.0°C

Section:

0551 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and swivel spout, incorporating a manual diverter to a shower outlet

WRAS Approval Number:

250102065

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Products are not supplied with shower hose or handset.

Size:

3/4" BSP (M)

Marking:

SONAS on body

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2030

Model:

UBR0201 (in Chrome) UBR0202 (in Matt Black) UBR0203 (in Brushed Gold) UBR0204 (in Brushed Nickel) UBR0209 (in Chrome) UBR0210 (in Matt Black) UBR0211 (in Brushed Gold) UBR0212 (in Brushed Nickel)

Approval Holder:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

General Email

2894475300@qq.com

View All Listings by this Company

Four-hole, single outlet, (fixed) combination tap assembly with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The product is supplied with stainless-steel braided EPDM lined flexible hose assemblies between the side valves and spout, and also on the diverter outlet at the base of the spout. The product is also supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0673 Combination Tap Assemblies

Section Subtitle:

Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.

WRAS Approval Number:

250415012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

LANBIAO on body.

Installation Requirements:

R001 R006 R020

Expiry date:

30/04/2030

Proviso:

This approval does not include a shower hose and handset.

Model:

F9009-** Where ** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.

Manufacturer:

Taizhou Lanbiao Sanitary Ware Co., Ltd

Company Name

Taizhou Lanbiao Sanitary Ware Co., Ltd

Address

XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG

Postcode

317600

Country

China

Phone

13736601565

View All Listings by this Company

Range of single check valve assemblies consisting of a single check valve cartridge housed within a DZR brass body. Compression connections on for use with popper pipe to BS EN1057. Maximum working pressure 16 Bar. Maximum operating temperature 65°C.

Section:

0030 Backflow Prevention Devices

Section Subtitle:

Non-verifiable single check valve assembly - Type EB. Providing Fluid Category 2 protection. Verified by test.

WRAS Approval Number:

250402704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

RWC logo, CR, flow arrow, size, EB on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

FLOW235001 15mm compression inlet/outlet FLOW235002 22mm compression inlet/outlet FLOW235003 28mm compression inlet/outlet FLOW235004 ½” BSP F inlet/outlet FLOW235005 ¾” BSP F inlet/outlet FLOW235006 1” BSP F inlet/outlet FLOW235007 1 ¼” BSP F inlet/outlet FLOW235008 1 ½” BSP F inlet/outlet FLOW235009 2” BSP F inlet/outlet

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of double check valve assemblies, incorporating two spring loaded resilient trim in-line check valve cartridges housed in DZR brass or nickel plated DZR brass bodies. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0034 Backflow Prevention Devices

Section Subtitle:

Non-verifiable double check valve assembly - Type ED. Providing Fluid Category 3 protection. Verified by test.

WRAS Approval Number:

250504714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

KINGFISHER, flow arrow, WRAS, size, CR, date of manufacture (MM-YY) on body. EN1254-2 & size: on compression nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Natural colour 5059340261331 - 15mm 5059340245881 - 22mm

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company