Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241104709

Range of indirect heat interface units (HIU) providing heating and instantaneous hot water. The central heating and hot water is generated via plate heat exchangers. Maximum operating pressure 10 bar (primary and DHW secondary). Maximum operating pressure 2.5 bar CH secondary Maximum operating temperature 90°C

Section:: 1465 Heaters
Section Subtitle:: Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:: 241104709
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 22mm compression
Marking:: Bosch on front panel and technical info on adhesive label.
Installation Requirements:: R001 R140 R360
Expiry date:: 30/11/2029
Model:: 7-735-600-739 - Flow 8500 40, 7-735-600-740 - Flow 8500 40 H, 7-735-600-741 - Flow 8500 50, 7-735-600-742 - Flow 8500 50 H, 7-735-600-743 - Flow 8500 60, 7-735-600-744 - Flow 8500 60 H.

Product Images

Approval Holder:: Bosch Thermotechnology Ltd.

Company Name
Bosch Thermotechnology Ltd.
Address
Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire
Postcode
S45 9BY

View All Listings by this Company

WRAS Approval Number: #2310403

Range of water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1505 Water Meters
Size:: 2½” BSP (M) connection. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 flanged connections.
Marking:: Resideo & Technical information on face. Size and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/10/2028
Model:: EW1710AC5000 EW1710AC5600 EW1710AC6500 EW1710AC7300 EW1710AC8100 EW1710AC8500 EW1710AC8900 EW1710AC9100 EW1710AC9200

Approval Holder:: Pittway Sarl

Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

WRAS Approval Number: #241102713

Range of plastic pressure sensors. Maximum working pressure: 15.99 Bar. Maximum operating temperature 90.0°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Part number, data code (X = last digit of year & YYY = day of year) and Sensata on body.
Installation Requirements:: R001
Expiry date:: 30/11/2029
Model:: 126CP3 - ¼” BSP M, 126CP4 - 3/8” BSP M, 126CP6 - 12mm OD.

Product Images

Manufacturer:: Sensata Technologies de Mexico S de RL de CV

Company Name
Sensata Technologies de Mexico S de RL de CV
Address
Av. Aguascalientes Sur #401 Ex-Ejido Ojo Caliente Aguascalientes
Postcode
20290
Country
Mexico
Phone
+52 449 910 5500

View All Listings by this Company

WRAS Approval Number: #241202711

Range of pressure transducers with stainless steel bodies. Maximum working pressure 10.0 Bar, 20 Bar or 40 Bar. Maximum operating temperature 99°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 9mm spigot for insertion into a quick release coupling or 1/4" BSP male.
Marking:: ABB, WRAS, Part number, Pressure range and technical info on adhesive label.
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: 3KXF004496U0100 - 9mm spigot. 10 bar, 3KXF004496U0200 - 9mm spigot. 10 bar, 3KXF004496U0500 - 9mm spigot. 20 bar, 3KXF004496U0600 - 9mm spigot. 20 bar, 3KXF004496U0700 - 1/4" BSP male. 40 bar, 3KXF004496U0800 - 1/4" BSP male. 40 bar, 3KXF004496U0900 - 9mm spigot. 20 bar.

Product Images

Approval Holder:: ABB Ltd.

Company Name
ABB Ltd.
Address
Oldends Lane, Stonehouse, Glos.
Postcode
GL10 3TA

View All Listings by this Company

WRAS Approval Number: #241102712

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (AMS models), 4.0 bar (EDH & EMH models) 8.0 bar (LVS models). Maximum operating temperature 85°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241102712
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: LEO on cover. LEO, model & technical information on date label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2029
Model:: EDH (m)XX-XX-F-E 1.m: different phase. --m: single phase, none: three phase. 2.XX: Rated flow (m³/h, range:2~20 m³/h. 3.XX: Impeller progression x10, progression range:1~6. 4.F: F type motor 5.E：E type end connection mode and size -- Rated flow (2 m³/h) :G1"XG1" -- Rated flow (4 m³/h) :G1¼"XG1¼" -- Rated flow (10-20 m³/h) :G2"XG2" AMS(m)XXX-XX-E 1.m: different phase. --m: single phase，none: three phase 2.XXX: Rated flow（L/min） 3. XX: Rated power（kW）. 4.E：E type end connection mode and size -- Rated flow(70-120m³/h) : G1¼"XG1" -- Rated flow(210m³/h) :G1½"XG1¼" -- Rated flow (370 m³/h): G2"XG1¼" LVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 EMH (m)XX-XX\XX-SE 1.m: different phase. --m: single phase，none: three phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Product Images

Manufacturer:: Leo Group Pump(Zhejiang) Co., Ltd

Company Name
Leo Group Pump(Zhejiang) Co., Ltd
Address
No 1,3rd street, East Industry Center,Wenling, Zhejiang, China

View All Listings by this Company