Directory Search Results

Print List

#240755006

'Griffon UNI-100'. Amber coloured solvent cement intended to join PVC pipe and fittings. Apply as per manufacturer's instructions. Cure for 24 hours@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/07/2029

Approval Holder:
Bison International
Company Name
Bison International
Address
Dr.A.F. Philipsstraat 9, 4462 EW Goes
Country
Netherlands

View All Listings by this Company

Print This Approval


#240502016

Range of single-hole, single outlet (fixed) electronically operated, tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated by a touch sensor. The spout outlets incorporate plastic aerators. Max working pressure 8.0 bar. Max operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240502016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided PEX lined flexible hose assembly incorporating a 10mm spigot end connection.
Marking:
Stern logo on tap cover.
Installation Requirements:
R001 R006 R009
Expiry date:
31/05/2029
Model:
225100 - Touch B 225200 - Touch E
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#240202719

Range of side or bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow regulator. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240202719
Note:
IRN 560 applies to bottom entry model only.
Size:
1/2” BSP (M)
Marking:
Flomasta & Model on body.
Installation Requirements:
R001 R550 R560
Expiry date:
28/02/2029
Model:
C10042206 – Bottom entry fill valve C10042207 – Side entry fill valve

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#240402705

Range of bottom and side entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, delayed or non-delayed fill. The inlet incorporates a strainer. Maximum working pressure - 10 Bar Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240402705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R560 applies to bottom entry only
Size:
3/8” & ½” BSP (M)
Marking:
BS1212-4, Anboly logo and datum level on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/04/2029
Model:
ABL-2053 ABL-2145
Product Images

Approval Holder:
GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD
Company Name
GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD
Address
Weichi Park, Huangcuowei Village, Dongfeng Town, Chao’an District, Chaozhou City, Guangdong Province
Country
China
Phone
+86 0768-5388845
General Email
annie_lu0515@163.com

View All Listings by this Company
Manufacturer:
GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD
Company Name
GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD
Address
Weichi Park, Huangcuowei Village, Dongfeng Town, Chao’an District, Chaozhou City, Guangdong Province
Country
China
Phone
+86 0768-5388845
General Email
annie_lu0515@163.com

View All Listings by this Company

Print This Approval


#240502717

Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, bottom or side entry type with brass ½’’ or ¾” BSP inlet. The inlet incorporates a strainer, models incorporate a delay fill function. The bottom entry valves are height adjustable. Maximum working pressure - 10 Bar, Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240502717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R560 and R562 applies to the bottom entry valves only.
Size:
See Models.
Marking:
Viva, BS1212-4 and Datum level on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
31/05/2029
Model:
SKYAIR01 with ½” BSP (M) SKYAIR02 with ½” BSP (M) SKYAIR03 with ¾” BSP (M) SKYAIR04 with ¾” BSP (M)
Product Images

Approval Holder:
Mercantile Ventures Ltd ta Viva Sanitary
Company Name
Mercantile Ventures Ltd ta Viva Sanitary
Address
Units 1-3 Capitol Trading Park Liverpool
Postcode
L33 7SY
Country
United Kingdom
General Email
allan.hanson@vivasanitary.co.uk

View All Listings by this Company

Print This Approval


#2212365

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212365
Size:
½” BSP (M).
Marking:
Crosswater X logo on flush plate. Model & 6L waterline printed within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/12/2027
Model:
WCF114X51R & WCF114X50R WC

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#2209072

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209072
Marking:
MF, WRAS, , size, PN, flow arrow and CR on body.
Installation Requirements:
R001
Expiry date:
30/09/2027
Model:
M37040000DZR ½” BSP (F) inlet/outlet M37060000DZR ¾” BSP (F) inlet/outlet M37080000DZR 1” BSP (F) inlet/outlet M37100000DZR 1.1/4" BSP (F) inlet/outlet M37120000DZR 1½” BSP (F) inlet/outlet M37160000DZR 2” BSP (F) inlet/outlet

Approval Holder:
Masterflow Products Limited
Company Name
Masterflow Products Limited
Address
Globall House 95 Vantage Point West Mindlands
Postcode
DY6 7FT
Country
United Kingdom

View All Listings by this Company

Print This Approval


#240588006

Single hole, single outlet (fixed), over the rim (swivel nozzle) bidet combination tap assembly (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240588006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Villeroy & Boch on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
TVB105201110xx with pop up waste Where xx denotes the surface finish and can be replaced with: 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite.
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240588007

Range of single hole, single outlet (fixed), over the rim (swivel nozzle) bidet combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The product is supplied with a lever operated pop-up waste (not verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240588007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Villeroy & Boch on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2029
Model:
TVB104201110xx, TVB125001000xx, TVB103001000xx. Where xx denotes the surface finish and can be replaced with: 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite.
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240602006

Range of aerators with plastic bodies and EPDM ‘O’-rings. Model (SB-BTA) incorporates a (chrome plated brass) housing. Maximum operating temperature 85°C

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
240602006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
See Model
Marking:
SB-BTA – SHOWERBOB on Aerator housing SB-ITA- SB logo on Aerator
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
SB-BTA - M24 (M) SB-ITA -18.19 OD
Product Images

Approval Holder:
BOB Products Limited
Company Name
BOB Products Limited
Address
Avalon House High Street Chalford Stroud Gloucestershire
Postcode
GL6 8DS
Country
United Kingdom
General Email
nigel@showerbob.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 669 of 1013

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.