Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2201101

Range of wall mounted hose union taps (brass body or DZR brass body - see model) incorporating a non-rising spindle headwork with a ‘T’-type operating member. The CMBHUBDC-D model incorporate two approved single check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 14.0 Bar. Maximum operating temperature 85°C.

Section:: 1780 Taps
Section Subtitle:: Hose union tap(s).
WRAS Approval Number:: 2201101
Size:: ½” BSP (M).
Marking:: CMBFHUB-D Model MID and size on body. CMBHUBDC-D, CR and size on body.
Installation Requirements:: R001 R040
Expiry date:: 31/01/2027
Model:: Brass body: CMBFHUB-D DZR brass body: CMBHUBDC-D

Approval Holder:: Navigator MSL Ltd.

Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company

WRAS Approval Number: #2306313

Range of pillar tap (chrome plated brass), incorporating quarter ceramic disc headworks with single lever or dome type operating members. The spout outlets incorporate plastic aerators. Products are supplied with metal backnuts. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 2306313
Size:: see model
Marking:: Lanbiao on body
Installation Requirements:: R001 R006
Expiry date:: 30/06/2028
Model:: F6127 – ½” BSP (M) F6139 – ½” BSP (M) F6149 – ½” BSP (M) F7117 – ½” BSP (M) F7118 – ¾” BSP (M)

Product Images

Approval Holder:: TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company
Manufacturer:: TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company

WRAS Approval Number: #2304073

Temposoft Mix 2’ range of self-closing basin taps (chromium plated brass), incorporating spring loaded headworks and dome type operating members. Temperature is controlled independently using a single lever operating member and the spout outlets incorporate a plastic flow straightener. The inlets incorporate a check valve cartridge, that has not been fully tested to demonstrate it provides adequate backflow protection and plastic strainers. Model 74250015 is also supplied with spherical valves and 3/8” x ½” BSP reducers. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1820 Taps
Section Subtitle:: Self closing tap(s).
WRAS Approval Number:: 2304073
Size:: Stainless steel braided PEX lined hose with 3/8" BSP captive nut to 3/8" BSP(M) X 1/2" BSP captive nut isolation valve. Stainless steel braided PEX lined hose with 3/8" BSP captive nut.
Marking:: Delabie laser etched on operating member
Installation Requirements:: R001 R006 R010
Expiry date:: 30/04/2028
Model:: 742510 TEMPOSOFT MIX 2, 74250015 TEMPOSOFT MIX 2.

Product Images

Approval Holder:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

WRAS Approval Number: #2306017

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate screwdriver operated isolation valves. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2306017
Size:: Please refer to model.
Marking:: Fanski, WRAS and date of manufacture (YYYY) on crimped sleeve.
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: UKWR denotes the customer code and is replaced with XX. L denotes the length of the hose (between 50mm & 4,000mm) and is replaced with L50 to L4000. DG10E-UKWR-001-L (15mm compression x M10) - Bore size DN8. DG10E-UKWR-002-L (15mm compression x M12) - Bore size DN8. DG10E-UKWR-003-L (10mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-004-L (15mm compression x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-005-L (F ½" BSP X F ½" BSP) - Bore size DN10. DG10E-UKWR-006-L (15mm compression iso valve x F ½"BSP) - Bore size DN10. DG10E-UKWR-007-L (15mm push fit iso valve x 15mm push fit) - Bore size DN10. DG10E-UKWR-008-L (22mm compression iso valve x F ¾" BSP) - Bore size DN13. DG10E-UKWR-009-L (22mm x F ¾" BSP) - Bore size DN13. DG10E-UKWR-011-L (15mm compression x F ⅜" BSP) - Bore size DN10. DG10E-UKWR-012-L (15mm compression x F ½" BSP) - Bore size DN10. DG10E-UKWR-013-L (15mm compression x 10mm compression) - Bore size DN10. DG10E-UKWR-015-L (15mm compression x 15mm compression) - Bore size DN10. DG10E-UKWR-014-L (15mm compression x F ¾" BSP) - Bore size DN10. DG10E-UKWR-016-L (15mm compression x 22mm compression) - Bore size DN10. DG10E-UKWR-017-L (F ½” BSP x 22mm compression) - Bore size DN10. DG10E-UKWR-018-L (15mm compression iso valve x F ¾" BSP) - Bore size DN10. DG10E-UKWR-019-L (15mm push fit x M10) - Bore size DN10. DG10E-UKWR-020-L (15mm push-fit x M12) - Bore size DN10. DG10E-UKWR-021-L (15mm push-fit x F ¾" BSP) - Bore size DN10. DG10E-UKWR-022-L (15mm push fit x F ½" BSP elbow) - Bore size DN10. DG10E-UKWR-023-L (15mm push-fit x 15mm compression) - Bore size DN10. DG10E-UKWR-024-L (15mm push-fit x 15mm push fit) - Bore size DN10. DG10E-UKWR-025-L (F ¾" BSP x F ¾" BSP) - Bore size DN13. DG10E-UKWR-026-L (22mm compression x 22mm compression) - Bore size DN13. DG10E-UKWR-029-L (F ½” x M10) - Bore size DN8. DG10E-UKWR-030-L (F ⅜” x M10) - Bore size DN8. DG10E-UKWR-031-L (15mm compression iso valve x 15mm compression) - Bore size DN10. DG10E-WRAS-034-L (F3/4” x F3/4” elbow) - Bore size DN10. DG10E-QY-007-L (F ⅜” x F⅜”) - Bore size DN8. DG10E-QY-008-L (F⅜” x F⅜” elbow) - Bore size DN8. DG10E-834-001-L (F⅜" X F¼") - Bore size DN8. DG10E-UKWR-032-L (F½" x M½") - Bore size DN13, DG10E-UKWR-033-L (15mm x M½") - Bore size DN13, DG10E-UKWR-035-L (F¾" x M¾") - Bore size DN13 & DG10E-UKWR-036-L (F½" x F½" Elbow) - Bore size DN10. DG10E-WRAS-038-L (F½" x M½") - Bore size DN8 DG10E-XC-002-L (F½" BSP X F½" BSP) - Bore size DN8 DG10E-A007010-028-L(F1/2”X15mm compression iso valve)-Bore size DN13 DG10E-EWT-003-L(F1/2”XF1/2”)-Bore size DN13 DG10E-A007010-027-L(F1/2”X15mm)-Bore size DN13 DG10E-A007119-019-L(22mm X 22mm with iso valve)-Bore size DN13 DG10E-A007010-037-L(15mm X 15mm)-Bore size DN13 DG10E-A007010-013-L(15mm X M12x1 Short)-Bore size DN10 DG10E-SCS-001-L(F1/2”X14.7mm with iso valve) - Bore size DN10 DG10E-SCS-002-L(F3/4”X21mm with iso valve)-Bore size DN13 DG10E-A007010-014-L(15mm X M12x1 Long)-Bore size DN10 DG10E-TECH-001-L (F1/2"XM12)-Bore size DN8.

Product Images

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company

WRAS Approval Number: #2103345

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103345
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: MSL, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: BFFTCW-1510 BFFTCW-1510500 BFFTCW-1512 BFFTCW-1512500 BFFTCW-10D500 BFFTCW-10D900 BFFTCW-12D500 BFFTCW-12D900 BFFTCW-DD500 BFFTCW-DD900 BFFTCWIV-10D300 BFFTCWIV-12D300 BFFTCW-1515300 BFFTCW-1515500 BFFTCW-1515900 BFFTCW-15D300 BFFTCW-15D500 BFFTCW-15D900 BFFTCW-15E300 BFFTCW-15E500 BFFTCW-15E900 BFFTCW-2222300 BFFTCW-2222500 BFFTCW-22E300 BFFTCW-22E500 BFFTCW-22E900 BFFTCWIV-15D150 BFFTCWIV-15D300 BFFTCWIV-15D500 BFFTCWIV-15E300 BFFTCWIV-15E500 BFFTCWIV-22E30

Approval Holder:: Navigator MSL Ltd.

Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company